1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: target_triplet = @target@
37: subdir = man
38: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
39: $(srcdir)/mkrplso.1.in $(srcdir)/rpl.1.in $(srcdir)/rplcc.1.in \
40: $(srcdir)/rpllink.1.in $(srcdir)/rpltags.1.in
41: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42: am__aclocal_m4_deps = $(top_srcdir)/configure.in
43: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44: $(ACLOCAL_M4)
45: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
46: CONFIG_HEADER = $(top_builddir)/rplconfig.h
47: CONFIG_CLEAN_FILES = rpl.1 rplcc.1 rpllink.1 rpltags.1 mkrplso.1
48: CONFIG_CLEAN_VPATH_FILES =
49: SOURCES =
50: DIST_SOURCES =
51: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
52: html-recursive info-recursive install-data-recursive \
53: install-dvi-recursive install-exec-recursive \
54: install-html-recursive install-info-recursive \
55: install-pdf-recursive install-ps-recursive install-recursive \
56: installcheck-recursive installdirs-recursive pdf-recursive \
57: ps-recursive uninstall-recursive
58: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
59: am__vpath_adj = case $$p in \
60: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
61: *) f=$$p;; \
62: esac;
63: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
64: am__install_max = 40
65: am__nobase_strip_setup = \
66: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
67: am__nobase_strip = \
68: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
69: am__nobase_list = $(am__nobase_strip_setup); \
70: for p in $$list; do echo "$$p $$p"; done | \
71: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
72: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
73: if (++n[$$2] == $(am__install_max)) \
74: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
75: END { for (dir in files) print dir, files[dir] }'
76: am__base_list = \
77: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
78: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
79: man1dir = $(mandir)/man1
80: am__installdirs = "$(DESTDIR)$(man1dir)"
81: NROFF = nroff
82: MANS = $(man_MANS)
83: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
84: distclean-recursive maintainer-clean-recursive
85: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
86: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
87: distdir
88: ETAGS = etags
89: CTAGS = ctags
90: DIST_SUBDIRS = $(SUBDIRS)
91: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
92: am__relativize = \
93: dir0=`pwd`; \
94: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
95: sed_rest='s,^[^/]*/*,,'; \
96: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
97: sed_butlast='s,/*[^/]*$$,,'; \
98: while test -n "$$dir1"; do \
99: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
100: if test "$$first" != "."; then \
101: if test "$$first" = ".."; then \
102: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
103: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
104: else \
105: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
106: if test "$$first2" = "$$first"; then \
107: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
108: else \
109: dir2="../$$dir2"; \
110: fi; \
111: dir0="$$dir0"/"$$first"; \
112: fi; \
113: fi; \
114: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
115: done; \
116: reldir="$$dir2"
117: ABI = @ABI@
118: ACLOCAL = @ACLOCAL@
119: AMTAR = @AMTAR@
120: AUTOCONF = @AUTOCONF@
121: AUTOHEADER = @AUTOHEADER@
122: AUTOMAKE = @AUTOMAKE@
123: AWK = @AWK@
124: BSH_PATH = @BSH_PATH@
125: BUILD_OPENMOTIF = @BUILD_OPENMOTIF@
126: CC = @CC@
127: CCDEPMODE = @CCDEPMODE@
128: CFLAGS = @CFLAGS@
129: COCOA = @COCOA@
130: CPP = @CPP@
131: CPPFLAGS = @CPPFLAGS@
132: CXX = @CXX@
133: CXXDEPMODE = @CXXDEPMODE@
134: CXXFLAGS = @CXXFLAGS@
135: CYGPATH_W = @CYGPATH_W@
136: C_STANDARD = @C_STANDARD@
137: DATE = @DATE@
138: DATE_FR = @DATE_FR@
139: DEBUG = @DEBUG@
140: DEFS = @DEFS@
141: DEPDIR = @DEPDIR@
142: DVIPS = @DVIPS@
143: ECHO_C = @ECHO_C@
144: ECHO_N = @ECHO_N@
145: ECHO_T = @ECHO_T@
146: EGREP = @EGREP@
147: ELF = @ELF@
148: EXEEXT = @EXEEXT@
149: EXPERIMENTAL_CODE = @EXPERIMENTAL_CODE@
150: EXPORT_DYNAMIC = @EXPORT_DYNAMIC@
151: EXT_SQL = @EXT_SQL@
152: F77 = @F77@
153: FC = @FC@
154: FCFLAGS = @FCFLAGS@
155: FFLAGS = @FFLAGS@
156: FILE = @FILE@
157: FINAL_ENCODING = @FINAL_ENCODING@
158: FORCE_GNUPLOT_PATH = @FORCE_GNUPLOT_PATH@
159: GIAC = @GIAC@
160: GMP = @GMP@
161: GNUPLOT = @GNUPLOT@
162: GNUPLOT_COMPILATION = @GNUPLOT_COMPILATION@
163: GNUPLOT_P = @GNUPLOT_P@
164: GNUPLOT_SUPPORT = @GNUPLOT_SUPPORT@
165: GPP = @GPP@
166: GREP = @GREP@
167: GS = @GS@
168: GSL = @GSL@
169: GV = @GV@
170: HOST = @HOST@
171: ICONV = @ICONV@
172: INCMOTIF = @INCMOTIF@
173: INSTALL = @INSTALL@
174: INSTALL_DATA = @INSTALL_DATA@
175: INSTALL_PROGRAM = @INSTALL_PROGRAM@
176: INSTALL_SCRIPT = @INSTALL_SCRIPT@
177: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
178: IPCS_SYSV = @IPCS_SYSV@
179: IPV6 = @IPV6@
180: LATEX = @LATEX@
181: LDFLAGS = @LDFLAGS@
182: LIBMOTIF = @LIBMOTIF@
183: LIBOBJS = @LIBOBJS@
184: LIBRPLCAS = @LIBRPLCAS@
185: LIBS = @LIBS@
186: LIBXPM = @LIBXPM@
187: LN_S = @LN_S@
188: LTLIBOBJS = @LTLIBOBJS@
189: MAKEINFO = @MAKEINFO@
190: MALLOC = @MALLOC@
191: MKDIR_P = @MKDIR_P@
192: MOTIF_SUPPORT = @MOTIF_SUPPORT@
193: MPFR = @MPFR@
194: MYSQL_SUPPORT = @MYSQL_SUPPORT@
195: NCURSES = @NCURSES@
196: NESTED_FUNCTIONS = @NESTED_FUNCTIONS@
197: NTL = @NTL@
198: OBJEXT = @OBJEXT@
199: OPENMOTIF = @OPENMOTIF@
200: OPENSSL = @OPENSSL@
201: OS = @OS@
202: PACKAGE = @PACKAGE@
203: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
204: PACKAGE_NAME = @PACKAGE_NAME@
205: PACKAGE_STRING = @PACKAGE_STRING@
206: PACKAGE_TARNAME = @PACKAGE_TARNAME@
207: PACKAGE_URL = @PACKAGE_URL@
208: PACKAGE_VERSION = @PACKAGE_VERSION@
209: PARI = @PARI@
210: PATH_SEPARATOR = @PATH_SEPARATOR@
211: POSTGRESQL_SUPPORT = @POSTGRESQL_SUPPORT@
212: POSTSCRIPT_SUPPORT = @POSTSCRIPT_SUPPORT@
213: PROFILAGE = @PROFILAGE@
214: RANLIB = @RANLIB@
215: READLINE = @READLINE@
216: RPLCAS = @RPLCAS@
217: RUNPATH = @RUNPATH@
218: SED = @SED@
219: SEMAPHORES_NOMMES = @SEMAPHORES_NOMMES@
220: SEMUN = @SEMUN@
221: SET_MAKE = @SET_MAKE@
222: SHELL = @SHELL@
223: SIGSEGV = @SIGSEGV@
224: SQLITE = @SQLITE@
225: STRIP = @STRIP@
226: TEX = @TEX@
227: UNITS = @UNITS@
228: VERSION = @VERSION@
229: VIM = @VIM@
230: VIM_SUPPORT = @VIM_SUPPORT@
231: XMKMF = @XMKMF@
232: X_CFLAGS = @X_CFLAGS@
233: X_EXTRA_LIBS = @X_EXTRA_LIBS@
234: X_LIBS = @X_LIBS@
235: X_PRE_LIBS = @X_PRE_LIBS@
236: abs_builddir = @abs_builddir@
237: abs_srcdir = @abs_srcdir@
238: abs_top_builddir = @abs_top_builddir@
239: abs_top_srcdir = @abs_top_srcdir@
240: ac_ct_CC = @ac_ct_CC@
241: ac_ct_CXX = @ac_ct_CXX@
242: ac_ct_F77 = @ac_ct_F77@
243: ac_ct_FC = @ac_ct_FC@
244: am__include = @am__include@
245: am__leading_dot = @am__leading_dot@
246: am__quote = @am__quote@
247: am__tar = @am__tar@
248: am__untar = @am__untar@
249: bindir = @bindir@
250: build = @build@
251: build_alias = @build_alias@
252: build_cpu = @build_cpu@
253: build_os = @build_os@
254: build_vendor = @build_vendor@
255: builddir = @builddir@
256: datadir = @datadir@
257: datarootdir = @datarootdir@
258: docdir = @docdir@
259: dvidir = @dvidir@
260: exec_prefix = @exec_prefix@
261: host = @host@
262: host_alias = @host_alias@
263: host_cpu = @host_cpu@
264: host_os = @host_os@
265: host_vendor = @host_vendor@
266: htmldir = @htmldir@
267: includeX = @includeX@
268: includedir = @includedir@
269: infodir = @infodir@
270: install_sh = @install_sh@
271: libMySQLinc = @libMySQLinc@
272: libMySQLlib = @libMySQLlib@
273: libPgSQLinc = @libPgSQLinc@
274: libPgSQLlib = @libPgSQLlib@
275: libX = @libX@
276: libdir = @libdir@
277: libexecdir = @libexecdir@
278: localedir = @localedir@
279: localstatedir = @localstatedir@
280: mandir = @mandir@
281: mkdir_p = @mkdir_p@
282: oldincludedir = @oldincludedir@
283: pdfdir = @pdfdir@
284: prefix = @prefix@
285: program_transform_name = @program_transform_name@
286: psdir = @psdir@
287: sbindir = @sbindir@
288: sharedstatedir = @sharedstatedir@
289: srcdir = @srcdir@
290: subdirs = @subdirs@
291: sysconfdir = @sysconfdir@
292: target = @target@
293: target_alias = @target_alias@
294: target_cpu = @target_cpu@
295: target_os = @target_os@
296: target_vendor = @target_vendor@
297: top_build_prefix = @top_build_prefix@
298: top_builddir = @top_builddir@
299: top_srcdir = @top_srcdir@
300: SUBDIRS = fr_FR
301: man_MANS = rpl.1 rpltags.1 mkrplso.1 rplcc.1 rpllink.1
302: all: all-recursive
303:
304: .SUFFIXES:
305: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
306: @for dep in $?; do \
307: case '$(am__configure_deps)' in \
308: *$$dep*) \
309: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
310: && { if test -f $@; then exit 0; else break; fi; }; \
311: exit 1;; \
312: esac; \
313: done; \
314: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
315: $(am__cd) $(top_srcdir) && \
316: $(AUTOMAKE) --gnu man/Makefile
317: .PRECIOUS: Makefile
318: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
319: @case '$?' in \
320: *config.status*) \
321: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
322: *) \
323: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
324: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
325: esac;
326:
327: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
328: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
329:
330: $(top_srcdir)/configure: $(am__configure_deps)
331: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
332: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
333: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
334: $(am__aclocal_m4_deps):
335: rpl.1: $(top_builddir)/config.status $(srcdir)/rpl.1.in
336: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
337: rplcc.1: $(top_builddir)/config.status $(srcdir)/rplcc.1.in
338: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
339: rpllink.1: $(top_builddir)/config.status $(srcdir)/rpllink.1.in
340: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
341: rpltags.1: $(top_builddir)/config.status $(srcdir)/rpltags.1.in
342: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
343: mkrplso.1: $(top_builddir)/config.status $(srcdir)/mkrplso.1.in
344: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
345: install-man1: $(man_MANS)
346: @$(NORMAL_INSTALL)
347: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
348: @list=''; test -n "$(man1dir)" || exit 0; \
349: { for i in $$list; do echo "$$i"; done; \
350: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
351: sed -n '/\.1[a-z]*$$/p'; \
352: } | while read p; do \
353: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
354: echo "$$d$$p"; echo "$$p"; \
355: done | \
356: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
357: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
358: sed 'N;N;s,\n, ,g' | { \
359: list=; while read file base inst; do \
360: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
361: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
362: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
363: fi; \
364: done; \
365: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
366: while read files; do \
367: test -z "$$files" || { \
368: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
369: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
370: done; }
371:
372: uninstall-man1:
373: @$(NORMAL_UNINSTALL)
374: @list=''; test -n "$(man1dir)" || exit 0; \
375: files=`{ for i in $$list; do echo "$$i"; done; \
376: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
377: sed -n '/\.1[a-z]*$$/p'; \
378: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
379: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
380: test -z "$$files" || { \
381: echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
382: cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
383:
384: # This directory's subdirectories are mostly independent; you can cd
385: # into them and run `make' without going through this Makefile.
386: # To change the values of `make' variables: instead of editing Makefiles,
387: # (1) if the variable is set in `config.status', edit `config.status'
388: # (which will cause the Makefiles to be regenerated when you run `make');
389: # (2) otherwise, pass the desired values on the `make' command line.
390: $(RECURSIVE_TARGETS):
391: @fail= failcom='exit 1'; \
392: for f in x $$MAKEFLAGS; do \
393: case $$f in \
394: *=* | --[!k]*);; \
395: *k*) failcom='fail=yes';; \
396: esac; \
397: done; \
398: dot_seen=no; \
399: target=`echo $@ | sed s/-recursive//`; \
400: list='$(SUBDIRS)'; for subdir in $$list; do \
401: echo "Making $$target in $$subdir"; \
402: if test "$$subdir" = "."; then \
403: dot_seen=yes; \
404: local_target="$$target-am"; \
405: else \
406: local_target="$$target"; \
407: fi; \
408: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
409: || eval $$failcom; \
410: done; \
411: if test "$$dot_seen" = "no"; then \
412: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
413: fi; test -z "$$fail"
414:
415: $(RECURSIVE_CLEAN_TARGETS):
416: @fail= failcom='exit 1'; \
417: for f in x $$MAKEFLAGS; do \
418: case $$f in \
419: *=* | --[!k]*);; \
420: *k*) failcom='fail=yes';; \
421: esac; \
422: done; \
423: dot_seen=no; \
424: case "$@" in \
425: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
426: *) list='$(SUBDIRS)' ;; \
427: esac; \
428: rev=''; for subdir in $$list; do \
429: if test "$$subdir" = "."; then :; else \
430: rev="$$subdir $$rev"; \
431: fi; \
432: done; \
433: rev="$$rev ."; \
434: target=`echo $@ | sed s/-recursive//`; \
435: for subdir in $$rev; do \
436: echo "Making $$target in $$subdir"; \
437: if test "$$subdir" = "."; then \
438: local_target="$$target-am"; \
439: else \
440: local_target="$$target"; \
441: fi; \
442: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
443: || eval $$failcom; \
444: done && test -z "$$fail"
445: tags-recursive:
446: list='$(SUBDIRS)'; for subdir in $$list; do \
447: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
448: done
449: ctags-recursive:
450: list='$(SUBDIRS)'; for subdir in $$list; do \
451: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
452: done
453:
454: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
455: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
456: unique=`for i in $$list; do \
457: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
458: done | \
459: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
460: END { if (nonempty) { for (i in files) print i; }; }'`; \
461: mkid -fID $$unique
462: tags: TAGS
463:
464: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
465: $(TAGS_FILES) $(LISP)
466: set x; \
467: here=`pwd`; \
468: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
469: include_option=--etags-include; \
470: empty_fix=.; \
471: else \
472: include_option=--include; \
473: empty_fix=; \
474: fi; \
475: list='$(SUBDIRS)'; for subdir in $$list; do \
476: if test "$$subdir" = .; then :; else \
477: test ! -f $$subdir/TAGS || \
478: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
479: fi; \
480: done; \
481: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
482: unique=`for i in $$list; do \
483: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
484: done | \
485: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
486: END { if (nonempty) { for (i in files) print i; }; }'`; \
487: shift; \
488: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
489: test -n "$$unique" || unique=$$empty_fix; \
490: if test $$# -gt 0; then \
491: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
492: "$$@" $$unique; \
493: else \
494: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
495: $$unique; \
496: fi; \
497: fi
498: ctags: CTAGS
499: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
500: $(TAGS_FILES) $(LISP)
501: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
502: unique=`for i in $$list; do \
503: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
504: done | \
505: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
506: END { if (nonempty) { for (i in files) print i; }; }'`; \
507: test -z "$(CTAGS_ARGS)$$unique" \
508: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
509: $$unique
510:
511: GTAGS:
512: here=`$(am__cd) $(top_builddir) && pwd` \
513: && $(am__cd) $(top_srcdir) \
514: && gtags -i $(GTAGS_ARGS) "$$here"
515:
516: distclean-tags:
517: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
518:
519: distdir: $(DISTFILES)
520: @list='$(MANS)'; if test -n "$$list"; then \
521: list=`for p in $$list; do \
522: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
523: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
524: if test -n "$$list" && \
525: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
526: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
527: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
528: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
529: echo " typically \`make maintainer-clean' will remove them" >&2; \
530: exit 1; \
531: else :; fi; \
532: else :; fi
533: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
534: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
535: list='$(DISTFILES)'; \
536: dist_files=`for file in $$list; do echo $$file; done | \
537: sed -e "s|^$$srcdirstrip/||;t" \
538: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
539: case $$dist_files in \
540: */*) $(MKDIR_P) `echo "$$dist_files" | \
541: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
542: sort -u` ;; \
543: esac; \
544: for file in $$dist_files; do \
545: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
546: if test -d $$d/$$file; then \
547: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
548: if test -d "$(distdir)/$$file"; then \
549: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
550: fi; \
551: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
552: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
553: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
554: fi; \
555: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
556: else \
557: test -f "$(distdir)/$$file" \
558: || cp -p $$d/$$file "$(distdir)/$$file" \
559: || exit 1; \
560: fi; \
561: done
562: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
563: if test "$$subdir" = .; then :; else \
564: test -d "$(distdir)/$$subdir" \
565: || $(MKDIR_P) "$(distdir)/$$subdir" \
566: || exit 1; \
567: fi; \
568: done
569: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
570: if test "$$subdir" = .; then :; else \
571: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
572: $(am__relativize); \
573: new_distdir=$$reldir; \
574: dir1=$$subdir; dir2="$(top_distdir)"; \
575: $(am__relativize); \
576: new_top_distdir=$$reldir; \
577: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
578: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
579: ($(am__cd) $$subdir && \
580: $(MAKE) $(AM_MAKEFLAGS) \
581: top_distdir="$$new_top_distdir" \
582: distdir="$$new_distdir" \
583: am__remove_distdir=: \
584: am__skip_length_check=: \
585: am__skip_mode_fix=: \
586: distdir) \
587: || exit 1; \
588: fi; \
589: done
590: check-am: all-am
591: check: check-recursive
592: all-am: Makefile $(MANS)
593: installdirs: installdirs-recursive
594: installdirs-am:
595: for dir in "$(DESTDIR)$(man1dir)"; do \
596: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
597: done
598: install: install-recursive
599: install-exec: install-exec-recursive
600: install-data: install-data-recursive
601: uninstall: uninstall-recursive
602:
603: install-am: all-am
604: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
605:
606: installcheck: installcheck-recursive
607: install-strip:
608: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
609: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
610: `test -z '$(STRIP)' || \
611: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
612: mostlyclean-generic:
613:
614: clean-generic:
615:
616: distclean-generic:
617: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
618: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
619:
620: maintainer-clean-generic:
621: @echo "This command is intended for maintainers to use"
622: @echo "it deletes files that may require special tools to rebuild."
623: clean: clean-recursive
624:
625: clean-am: clean-generic mostlyclean-am
626:
627: distclean: distclean-recursive
628: -rm -f Makefile
629: distclean-am: clean-am distclean-generic distclean-tags
630:
631: dvi: dvi-recursive
632:
633: dvi-am:
634:
635: html: html-recursive
636:
637: html-am:
638:
639: info: info-recursive
640:
641: info-am:
642:
643: install-data-am: install-man
644:
645: install-dvi: install-dvi-recursive
646:
647: install-dvi-am:
648:
649: install-exec-am:
650:
651: install-html: install-html-recursive
652:
653: install-html-am:
654:
655: install-info: install-info-recursive
656:
657: install-info-am:
658:
659: install-man: install-man1
660:
661: install-pdf: install-pdf-recursive
662:
663: install-pdf-am:
664:
665: install-ps: install-ps-recursive
666:
667: install-ps-am:
668:
669: installcheck-am:
670:
671: maintainer-clean: maintainer-clean-recursive
672: -rm -f Makefile
673: maintainer-clean-am: distclean-am maintainer-clean-generic
674:
675: mostlyclean: mostlyclean-recursive
676:
677: mostlyclean-am: mostlyclean-generic
678:
679: pdf: pdf-recursive
680:
681: pdf-am:
682:
683: ps: ps-recursive
684:
685: ps-am:
686:
687: uninstall-am: uninstall-man
688:
689: uninstall-man: uninstall-man1
690:
691: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
692: install-am install-strip tags-recursive
693:
694: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
695: all all-am check check-am clean clean-generic ctags \
696: ctags-recursive distclean distclean-generic distclean-tags \
697: distdir dvi dvi-am html html-am info info-am install \
698: install-am install-data install-data-am install-dvi \
699: install-dvi-am install-exec install-exec-am install-html \
700: install-html-am install-info install-info-am install-man \
701: install-man1 install-pdf install-pdf-am install-ps \
702: install-ps-am install-strip installcheck installcheck-am \
703: installdirs installdirs-am maintainer-clean \
704: maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
705: pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
706: uninstall-man uninstall-man1
707:
708:
709: # Tell versions [3.59,3.63) of GNU make to not export all variables.
710: # Otherwise a system limit (for SysV at least) may be exceeded.
711: .NOEXPORT:
CVSweb interface <joel.bertrand@systella.fr>