Annotation of rpl/man/Makefile.in, revision 1.30
1.7 bertrand 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
1.1 bertrand 2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
1.7 bertrand 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
1.1 bertrand 7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
1.7 bertrand 19: pkgincludedir = $(includedir)/@PACKAGE@
1.6 bertrand 20: pkglibdir = $(libdir)/@PACKAGE@
1.7 bertrand 21: pkglibexecdir = $(libexecdir)/@PACKAGE@
1.1 bertrand 22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: target_triplet = @target@
37: subdir = man
38: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
39: $(srcdir)/mkrplso.1.in $(srcdir)/rpl.1.in $(srcdir)/rplcc.1.in \
40: $(srcdir)/rpllink.1.in $(srcdir)/rpltags.1.in
41: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42: am__aclocal_m4_deps = $(top_srcdir)/configure.in
43: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44: $(ACLOCAL_M4)
45: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
46: CONFIG_HEADER = $(top_builddir)/rplconfig.h
47: CONFIG_CLEAN_FILES = rpl.1 rplcc.1 rpllink.1 rpltags.1 mkrplso.1
1.7 bertrand 48: CONFIG_CLEAN_VPATH_FILES =
1.1 bertrand 49: SOURCES =
50: DIST_SOURCES =
51: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
52: html-recursive info-recursive install-data-recursive \
53: install-dvi-recursive install-exec-recursive \
54: install-html-recursive install-info-recursive \
55: install-pdf-recursive install-ps-recursive install-recursive \
56: installcheck-recursive installdirs-recursive pdf-recursive \
57: ps-recursive uninstall-recursive
1.7 bertrand 58: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
59: am__vpath_adj = case $$p in \
60: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
61: *) f=$$p;; \
62: esac;
63: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
64: am__install_max = 40
65: am__nobase_strip_setup = \
66: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
67: am__nobase_strip = \
68: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
69: am__nobase_list = $(am__nobase_strip_setup); \
70: for p in $$list; do echo "$$p $$p"; done | \
71: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
72: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
73: if (++n[$$2] == $(am__install_max)) \
74: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
75: END { for (dir in files) print dir, files[dir] }'
76: am__base_list = \
77: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
78: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
1.1 bertrand 79: man1dir = $(mandir)/man1
80: am__installdirs = "$(DESTDIR)$(man1dir)"
81: NROFF = nroff
82: MANS = $(man_MANS)
83: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
84: distclean-recursive maintainer-clean-recursive
1.7 bertrand 85: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
86: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
87: distdir
1.1 bertrand 88: ETAGS = etags
89: CTAGS = ctags
90: DIST_SUBDIRS = $(SUBDIRS)
91: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
1.7 bertrand 92: am__relativize = \
93: dir0=`pwd`; \
94: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
95: sed_rest='s,^[^/]*/*,,'; \
96: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
97: sed_butlast='s,/*[^/]*$$,,'; \
98: while test -n "$$dir1"; do \
99: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
100: if test "$$first" != "."; then \
101: if test "$$first" = ".."; then \
102: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
103: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
104: else \
105: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
106: if test "$$first2" = "$$first"; then \
107: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
108: else \
109: dir2="../$$dir2"; \
110: fi; \
111: dir0="$$dir0"/"$$first"; \
112: fi; \
113: fi; \
114: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
115: done; \
116: reldir="$$dir2"
1.30 ! bertrand 117: ABI = @ABI@
1.1 bertrand 118: ACLOCAL = @ACLOCAL@
119: AMTAR = @AMTAR@
120: AUTOCONF = @AUTOCONF@
121: AUTOHEADER = @AUTOHEADER@
122: AUTOMAKE = @AUTOMAKE@
123: AWK = @AWK@
1.21 bertrand 124: BROKEN_SIGINFO = @BROKEN_SIGINFO@
1.25 bertrand 125: BSH_PATH = @BSH_PATH@
1.1 bertrand 126: CC = @CC@
127: CCDEPMODE = @CCDEPMODE@
128: CFLAGS = @CFLAGS@
1.29 bertrand 129: COCOA = @COCOA@
1.1 bertrand 130: CPP = @CPP@
131: CPPFLAGS = @CPPFLAGS@
132: CXX = @CXX@
133: CXXDEPMODE = @CXXDEPMODE@
134: CXXFLAGS = @CXXFLAGS@
135: CYGPATH_W = @CYGPATH_W@
1.19 bertrand 136: C_STANDARD = @C_STANDARD@
1.1 bertrand 137: DATE = @DATE@
138: DATE_FR = @DATE_FR@
139: DEBUG = @DEBUG@
140: DEFS = @DEFS@
141: DEPDIR = @DEPDIR@
142: DVIPS = @DVIPS@
143: ECHO_C = @ECHO_C@
144: ECHO_N = @ECHO_N@
145: ECHO_T = @ECHO_T@
146: EGREP = @EGREP@
147: EXEEXT = @EXEEXT@
148: EXPERIMENTAL_CODE = @EXPERIMENTAL_CODE@
1.8 bertrand 149: EXPORT_DYNAMIC = @EXPORT_DYNAMIC@
1.17 bertrand 150: EXT_SQL = @EXT_SQL@
1.1 bertrand 151: F77 = @F77@
152: FC = @FC@
153: FCFLAGS = @FCFLAGS@
154: FFLAGS = @FFLAGS@
155: FILE = @FILE@
156: FINAL_ENCODING = @FINAL_ENCODING@
157: FORCE_GNUPLOT_PATH = @FORCE_GNUPLOT_PATH@
1.29 bertrand 158: GIAC = @GIAC@
1.28 bertrand 159: GMP = @GMP@
1.1 bertrand 160: GNUPLOT = @GNUPLOT@
161: GNUPLOT_COMPILATION = @GNUPLOT_COMPILATION@
162: GNUPLOT_P = @GNUPLOT_P@
163: GNUPLOT_SUPPORT = @GNUPLOT_SUPPORT@
164: GPP = @GPP@
165: GREP = @GREP@
166: GS = @GS@
167: GSL = @GSL@
168: GV = @GV@
169: ICONV = @ICONV@
170: INSTALL = @INSTALL@
171: INSTALL_DATA = @INSTALL_DATA@
172: INSTALL_PROGRAM = @INSTALL_PROGRAM@
173: INSTALL_SCRIPT = @INSTALL_SCRIPT@
174: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
1.22 bertrand 175: IPCS_SYSV = @IPCS_SYSV@
1.20 bertrand 176: IPV6 = @IPV6@
1.1 bertrand 177: LATEX = @LATEX@
178: LDFLAGS = @LDFLAGS@
179: LIBOBJS = @LIBOBJS@
180: LIBS = @LIBS@
181: LN_S = @LN_S@
182: LTLIBOBJS = @LTLIBOBJS@
183: MAKEINFO = @MAKEINFO@
1.27 bertrand 184: MALLOC = @MALLOC@
1.1 bertrand 185: MKDIR_P = @MKDIR_P@
186: MOTIF_SUPPORT = @MOTIF_SUPPORT@
1.28 bertrand 187: MPFR = @MPFR@
1.1 bertrand 188: MYSQL_SUPPORT = @MYSQL_SUPPORT@
189: NCURSES = @NCURSES@
1.8 bertrand 190: NESTED_FUNCTIONS = @NESTED_FUNCTIONS@
1.29 bertrand 191: NTL = @NTL@
1.1 bertrand 192: OBJEXT = @OBJEXT@
1.5 bertrand 193: OPENSSL = @OPENSSL@
1.4 bertrand 194: OS = @OS@
1.1 bertrand 195: PACKAGE = @PACKAGE@
196: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
197: PACKAGE_NAME = @PACKAGE_NAME@
198: PACKAGE_STRING = @PACKAGE_STRING@
199: PACKAGE_TARNAME = @PACKAGE_TARNAME@
1.7 bertrand 200: PACKAGE_URL = @PACKAGE_URL@
1.1 bertrand 201: PACKAGE_VERSION = @PACKAGE_VERSION@
1.29 bertrand 202: PARI = @PARI@
1.1 bertrand 203: PATH_SEPARATOR = @PATH_SEPARATOR@
204: POSTGRESQL_SUPPORT = @POSTGRESQL_SUPPORT@
205: POSTSCRIPT_SUPPORT = @POSTSCRIPT_SUPPORT@
206: PROFILAGE = @PROFILAGE@
207: RANLIB = @RANLIB@
208: READLINE = @READLINE@
209: RUNPATH = @RUNPATH@
210: SED = @SED@
1.8 bertrand 211: SEMAPHORES_NOMMES = @SEMAPHORES_NOMMES@
1.19 bertrand 212: SEMUN = @SEMUN@
1.1 bertrand 213: SET_MAKE = @SET_MAKE@
214: SHELL = @SHELL@
1.5 bertrand 215: SQLITE = @SQLITE@
1.1 bertrand 216: STRIP = @STRIP@
217: TEX = @TEX@
218: UNITS = @UNITS@
219: VERSION = @VERSION@
220: VIM = @VIM@
221: VIM_SUPPORT = @VIM_SUPPORT@
222: XMKMF = @XMKMF@
223: X_CFLAGS = @X_CFLAGS@
224: X_EXTRA_LIBS = @X_EXTRA_LIBS@
225: X_LIBS = @X_LIBS@
226: X_PRE_LIBS = @X_PRE_LIBS@
227: abs_builddir = @abs_builddir@
228: abs_srcdir = @abs_srcdir@
229: abs_top_builddir = @abs_top_builddir@
230: abs_top_srcdir = @abs_top_srcdir@
231: ac_ct_CC = @ac_ct_CC@
232: ac_ct_CXX = @ac_ct_CXX@
233: ac_ct_F77 = @ac_ct_F77@
234: ac_ct_FC = @ac_ct_FC@
235: am__include = @am__include@
236: am__leading_dot = @am__leading_dot@
237: am__quote = @am__quote@
238: am__tar = @am__tar@
239: am__untar = @am__untar@
240: bindir = @bindir@
241: build = @build@
242: build_alias = @build_alias@
243: build_cpu = @build_cpu@
244: build_os = @build_os@
245: build_vendor = @build_vendor@
246: builddir = @builddir@
247: datadir = @datadir@
248: datarootdir = @datarootdir@
249: docdir = @docdir@
250: dvidir = @dvidir@
251: exec_prefix = @exec_prefix@
252: host = @host@
253: host_alias = @host_alias@
254: host_cpu = @host_cpu@
255: host_os = @host_os@
256: host_vendor = @host_vendor@
257: htmldir = @htmldir@
258: includeX = @includeX@
259: includedir = @includedir@
260: infodir = @infodir@
261: install_sh = @install_sh@
262: libMySQLinc = @libMySQLinc@
263: libMySQLlib = @libMySQLlib@
264: libPgSQLinc = @libPgSQLinc@
265: libPgSQLlib = @libPgSQLlib@
266: libX = @libX@
267: libdir = @libdir@
268: libexecdir = @libexecdir@
269: localedir = @localedir@
270: localstatedir = @localstatedir@
271: mandir = @mandir@
272: mkdir_p = @mkdir_p@
273: oldincludedir = @oldincludedir@
274: pdfdir = @pdfdir@
275: prefix = @prefix@
276: program_transform_name = @program_transform_name@
277: psdir = @psdir@
278: sbindir = @sbindir@
279: sharedstatedir = @sharedstatedir@
280: srcdir = @srcdir@
281: subdirs = @subdirs@
282: sysconfdir = @sysconfdir@
283: target = @target@
284: target_alias = @target_alias@
285: target_cpu = @target_cpu@
286: target_os = @target_os@
287: target_vendor = @target_vendor@
1.7 bertrand 288: top_build_prefix = @top_build_prefix@
1.1 bertrand 289: top_builddir = @top_builddir@
290: top_srcdir = @top_srcdir@
291: SUBDIRS = fr_FR
292: man_MANS = rpl.1 rpltags.1 mkrplso.1 rplcc.1 rpllink.1
293: all: all-recursive
294:
295: .SUFFIXES:
296: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
297: @for dep in $?; do \
298: case '$(am__configure_deps)' in \
299: *$$dep*) \
1.7 bertrand 300: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
301: && { if test -f $@; then exit 0; else break; fi; }; \
1.1 bertrand 302: exit 1;; \
303: esac; \
304: done; \
1.7 bertrand 305: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
306: $(am__cd) $(top_srcdir) && \
307: $(AUTOMAKE) --gnu man/Makefile
1.1 bertrand 308: .PRECIOUS: Makefile
309: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
310: @case '$?' in \
311: *config.status*) \
312: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
313: *) \
314: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
315: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
316: esac;
317:
318: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
319: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
320:
321: $(top_srcdir)/configure: $(am__configure_deps)
322: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
323: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
324: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
1.7 bertrand 325: $(am__aclocal_m4_deps):
1.1 bertrand 326: rpl.1: $(top_builddir)/config.status $(srcdir)/rpl.1.in
327: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
328: rplcc.1: $(top_builddir)/config.status $(srcdir)/rplcc.1.in
329: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
330: rpllink.1: $(top_builddir)/config.status $(srcdir)/rpllink.1.in
331: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
332: rpltags.1: $(top_builddir)/config.status $(srcdir)/rpltags.1.in
333: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
334: mkrplso.1: $(top_builddir)/config.status $(srcdir)/mkrplso.1.in
335: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
1.7 bertrand 336: install-man1: $(man_MANS)
1.1 bertrand 337: @$(NORMAL_INSTALL)
338: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
1.7 bertrand 339: @list=''; test -n "$(man1dir)" || exit 0; \
340: { for i in $$list; do echo "$$i"; done; \
341: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
342: sed -n '/\.1[a-z]*$$/p'; \
343: } | while read p; do \
344: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
345: echo "$$d$$p"; echo "$$p"; \
346: done | \
347: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
348: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
349: sed 'N;N;s,\n, ,g' | { \
350: list=; while read file base inst; do \
351: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
352: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
353: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
354: fi; \
1.1 bertrand 355: done; \
1.7 bertrand 356: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
357: while read files; do \
358: test -z "$$files" || { \
359: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
360: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
361: done; }
362:
1.1 bertrand 363: uninstall-man1:
364: @$(NORMAL_UNINSTALL)
1.7 bertrand 365: @list=''; test -n "$(man1dir)" || exit 0; \
366: files=`{ for i in $$list; do echo "$$i"; done; \
367: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
368: sed -n '/\.1[a-z]*$$/p'; \
369: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
370: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
371: test -z "$$files" || { \
372: echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
373: cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
1.1 bertrand 374:
375: # This directory's subdirectories are mostly independent; you can cd
376: # into them and run `make' without going through this Makefile.
377: # To change the values of `make' variables: instead of editing Makefiles,
378: # (1) if the variable is set in `config.status', edit `config.status'
379: # (which will cause the Makefiles to be regenerated when you run `make');
380: # (2) otherwise, pass the desired values on the `make' command line.
381: $(RECURSIVE_TARGETS):
1.7 bertrand 382: @fail= failcom='exit 1'; \
1.1 bertrand 383: for f in x $$MAKEFLAGS; do \
384: case $$f in \
385: *=* | --[!k]*);; \
386: *k*) failcom='fail=yes';; \
387: esac; \
388: done; \
389: dot_seen=no; \
390: target=`echo $@ | sed s/-recursive//`; \
391: list='$(SUBDIRS)'; for subdir in $$list; do \
392: echo "Making $$target in $$subdir"; \
393: if test "$$subdir" = "."; then \
394: dot_seen=yes; \
395: local_target="$$target-am"; \
396: else \
397: local_target="$$target"; \
398: fi; \
1.7 bertrand 399: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
1.1 bertrand 400: || eval $$failcom; \
401: done; \
402: if test "$$dot_seen" = "no"; then \
403: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
404: fi; test -z "$$fail"
405:
406: $(RECURSIVE_CLEAN_TARGETS):
1.7 bertrand 407: @fail= failcom='exit 1'; \
1.1 bertrand 408: for f in x $$MAKEFLAGS; do \
409: case $$f in \
410: *=* | --[!k]*);; \
411: *k*) failcom='fail=yes';; \
412: esac; \
413: done; \
414: dot_seen=no; \
415: case "$@" in \
416: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
417: *) list='$(SUBDIRS)' ;; \
418: esac; \
419: rev=''; for subdir in $$list; do \
420: if test "$$subdir" = "."; then :; else \
421: rev="$$subdir $$rev"; \
422: fi; \
423: done; \
424: rev="$$rev ."; \
425: target=`echo $@ | sed s/-recursive//`; \
426: for subdir in $$rev; do \
427: echo "Making $$target in $$subdir"; \
428: if test "$$subdir" = "."; then \
429: local_target="$$target-am"; \
430: else \
431: local_target="$$target"; \
432: fi; \
1.7 bertrand 433: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
1.1 bertrand 434: || eval $$failcom; \
435: done && test -z "$$fail"
436: tags-recursive:
437: list='$(SUBDIRS)'; for subdir in $$list; do \
1.7 bertrand 438: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
1.1 bertrand 439: done
440: ctags-recursive:
441: list='$(SUBDIRS)'; for subdir in $$list; do \
1.7 bertrand 442: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
1.1 bertrand 443: done
444:
445: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
446: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
447: unique=`for i in $$list; do \
448: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
449: done | \
1.7 bertrand 450: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1.1 bertrand 451: END { if (nonempty) { for (i in files) print i; }; }'`; \
452: mkid -fID $$unique
453: tags: TAGS
454:
455: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
456: $(TAGS_FILES) $(LISP)
1.7 bertrand 457: set x; \
1.1 bertrand 458: here=`pwd`; \
459: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
460: include_option=--etags-include; \
461: empty_fix=.; \
462: else \
463: include_option=--include; \
464: empty_fix=; \
465: fi; \
466: list='$(SUBDIRS)'; for subdir in $$list; do \
467: if test "$$subdir" = .; then :; else \
468: test ! -f $$subdir/TAGS || \
1.7 bertrand 469: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
1.1 bertrand 470: fi; \
471: done; \
472: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
473: unique=`for i in $$list; do \
474: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
475: done | \
476: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
477: END { if (nonempty) { for (i in files) print i; }; }'`; \
1.7 bertrand 478: shift; \
479: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
1.1 bertrand 480: test -n "$$unique" || unique=$$empty_fix; \
1.7 bertrand 481: if test $$# -gt 0; then \
482: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
483: "$$@" $$unique; \
484: else \
485: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
486: $$unique; \
487: fi; \
1.1 bertrand 488: fi
489: ctags: CTAGS
490: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
491: $(TAGS_FILES) $(LISP)
492: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
493: unique=`for i in $$list; do \
494: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
495: done | \
496: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
497: END { if (nonempty) { for (i in files) print i; }; }'`; \
1.7 bertrand 498: test -z "$(CTAGS_ARGS)$$unique" \
1.1 bertrand 499: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1.7 bertrand 500: $$unique
1.1 bertrand 501:
502: GTAGS:
503: here=`$(am__cd) $(top_builddir) && pwd` \
1.7 bertrand 504: && $(am__cd) $(top_srcdir) \
505: && gtags -i $(GTAGS_ARGS) "$$here"
1.1 bertrand 506:
507: distclean-tags:
508: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
509:
510: distdir: $(DISTFILES)
1.7 bertrand 511: @list='$(MANS)'; if test -n "$$list"; then \
512: list=`for p in $$list; do \
513: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
514: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
515: if test -n "$$list" && \
516: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
517: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
518: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
519: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
520: echo " typically \`make maintainer-clean' will remove them" >&2; \
521: exit 1; \
522: else :; fi; \
523: else :; fi
1.1 bertrand 524: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
525: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
526: list='$(DISTFILES)'; \
527: dist_files=`for file in $$list; do echo $$file; done | \
528: sed -e "s|^$$srcdirstrip/||;t" \
529: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
530: case $$dist_files in \
531: */*) $(MKDIR_P) `echo "$$dist_files" | \
532: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
533: sort -u` ;; \
534: esac; \
535: for file in $$dist_files; do \
536: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
537: if test -d $$d/$$file; then \
538: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1.7 bertrand 539: if test -d "$(distdir)/$$file"; then \
540: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
541: fi; \
1.1 bertrand 542: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1.7 bertrand 543: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
544: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1.1 bertrand 545: fi; \
1.7 bertrand 546: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1.1 bertrand 547: else \
1.7 bertrand 548: test -f "$(distdir)/$$file" \
549: || cp -p $$d/$$file "$(distdir)/$$file" \
1.1 bertrand 550: || exit 1; \
551: fi; \
552: done
1.7 bertrand 553: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1.1 bertrand 554: if test "$$subdir" = .; then :; else \
555: test -d "$(distdir)/$$subdir" \
556: || $(MKDIR_P) "$(distdir)/$$subdir" \
557: || exit 1; \
1.7 bertrand 558: fi; \
559: done
560: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
561: if test "$$subdir" = .; then :; else \
562: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
563: $(am__relativize); \
564: new_distdir=$$reldir; \
565: dir1=$$subdir; dir2="$(top_distdir)"; \
566: $(am__relativize); \
567: new_top_distdir=$$reldir; \
568: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
569: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
570: ($(am__cd) $$subdir && \
1.1 bertrand 571: $(MAKE) $(AM_MAKEFLAGS) \
1.7 bertrand 572: top_distdir="$$new_top_distdir" \
573: distdir="$$new_distdir" \
1.1 bertrand 574: am__remove_distdir=: \
575: am__skip_length_check=: \
1.7 bertrand 576: am__skip_mode_fix=: \
1.1 bertrand 577: distdir) \
578: || exit 1; \
579: fi; \
580: done
581: check-am: all-am
582: check: check-recursive
583: all-am: Makefile $(MANS)
584: installdirs: installdirs-recursive
585: installdirs-am:
586: for dir in "$(DESTDIR)$(man1dir)"; do \
587: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
588: done
589: install: install-recursive
590: install-exec: install-exec-recursive
591: install-data: install-data-recursive
592: uninstall: uninstall-recursive
593:
594: install-am: all-am
595: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
596:
597: installcheck: installcheck-recursive
598: install-strip:
599: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
600: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
601: `test -z '$(STRIP)' || \
602: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
603: mostlyclean-generic:
604:
605: clean-generic:
606:
607: distclean-generic:
608: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1.7 bertrand 609: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1.1 bertrand 610:
611: maintainer-clean-generic:
612: @echo "This command is intended for maintainers to use"
613: @echo "it deletes files that may require special tools to rebuild."
614: clean: clean-recursive
615:
616: clean-am: clean-generic mostlyclean-am
617:
618: distclean: distclean-recursive
619: -rm -f Makefile
620: distclean-am: clean-am distclean-generic distclean-tags
621:
622: dvi: dvi-recursive
623:
624: dvi-am:
625:
626: html: html-recursive
627:
1.7 bertrand 628: html-am:
629:
1.1 bertrand 630: info: info-recursive
631:
632: info-am:
633:
634: install-data-am: install-man
635:
636: install-dvi: install-dvi-recursive
637:
1.7 bertrand 638: install-dvi-am:
639:
1.1 bertrand 640: install-exec-am:
641:
642: install-html: install-html-recursive
643:
1.7 bertrand 644: install-html-am:
645:
1.1 bertrand 646: install-info: install-info-recursive
647:
1.7 bertrand 648: install-info-am:
649:
1.1 bertrand 650: install-man: install-man1
651:
652: install-pdf: install-pdf-recursive
653:
1.7 bertrand 654: install-pdf-am:
655:
1.1 bertrand 656: install-ps: install-ps-recursive
657:
1.7 bertrand 658: install-ps-am:
659:
1.1 bertrand 660: installcheck-am:
661:
662: maintainer-clean: maintainer-clean-recursive
663: -rm -f Makefile
664: maintainer-clean-am: distclean-am maintainer-clean-generic
665:
666: mostlyclean: mostlyclean-recursive
667:
668: mostlyclean-am: mostlyclean-generic
669:
670: pdf: pdf-recursive
671:
672: pdf-am:
673:
674: ps: ps-recursive
675:
676: ps-am:
677:
678: uninstall-am: uninstall-man
679:
680: uninstall-man: uninstall-man1
681:
1.7 bertrand 682: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
683: install-am install-strip tags-recursive
1.1 bertrand 684:
685: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
686: all all-am check check-am clean clean-generic ctags \
687: ctags-recursive distclean distclean-generic distclean-tags \
688: distdir dvi dvi-am html html-am info info-am install \
689: install-am install-data install-data-am install-dvi \
690: install-dvi-am install-exec install-exec-am install-html \
691: install-html-am install-info install-info-am install-man \
692: install-man1 install-pdf install-pdf-am install-ps \
693: install-ps-am install-strip installcheck installcheck-am \
694: installdirs installdirs-am maintainer-clean \
695: maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
696: pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
697: uninstall-man uninstall-man1
698:
1.7 bertrand 699:
1.1 bertrand 700: # Tell versions [3.59,3.63) of GNU make to not export all variables.
701: # Otherwise a system limit (for SysV at least) may be exceeded.
702: .NOEXPORT:
CVSweb interface <joel.bertrand@systella.fr>