Annotation of rpl/lapack/lapack/zsysvxx.f, revision 1.1
1.1 ! bertrand 1: SUBROUTINE ZSYSVXX( FACT, UPLO, N, NRHS, A, LDA, AF, LDAF, IPIV,
! 2: $ EQUED, S, B, LDB, X, LDX, RCOND, RPVGRW, BERR,
! 3: $ N_ERR_BNDS, ERR_BNDS_NORM, ERR_BNDS_COMP,
! 4: $ NPARAMS, PARAMS, WORK, RWORK, INFO )
! 5: *
! 6: * -- LAPACK driver routine (version 3.2.2) --
! 7: * -- Contributed by James Demmel, Deaglan Halligan, Yozo Hida and --
! 8: * -- Jason Riedy of Univ. of California Berkeley. --
! 9: * -- June 2010 --
! 10: *
! 11: * -- LAPACK is a software package provided by Univ. of Tennessee, --
! 12: * -- Univ. of California Berkeley and NAG Ltd. --
! 13: *
! 14: IMPLICIT NONE
! 15: * ..
! 16: * .. Scalar Arguments ..
! 17: CHARACTER EQUED, FACT, UPLO
! 18: INTEGER INFO, LDA, LDAF, LDB, LDX, N, NRHS, NPARAMS,
! 19: $ N_ERR_BNDS
! 20: DOUBLE PRECISION RCOND, RPVGRW
! 21: * ..
! 22: * .. Array Arguments ..
! 23: INTEGER IPIV( * )
! 24: COMPLEX*16 A( LDA, * ), AF( LDAF, * ), B( LDB, * ),
! 25: $ X( LDX, * ), WORK( * )
! 26: DOUBLE PRECISION S( * ), PARAMS( * ), BERR( * ),
! 27: $ ERR_BNDS_NORM( NRHS, * ),
! 28: $ ERR_BNDS_COMP( NRHS, * ), RWORK( * )
! 29: * ..
! 30: *
! 31: * Purpose
! 32: * =======
! 33: *
! 34: * ZSYSVXX uses the diagonal pivoting factorization to compute the
! 35: * solution to a complex*16 system of linear equations A * X = B, where
! 36: * A is an N-by-N symmetric matrix and X and B are N-by-NRHS
! 37: * matrices.
! 38: *
! 39: * If requested, both normwise and maximum componentwise error bounds
! 40: * are returned. ZSYSVXX will return a solution with a tiny
! 41: * guaranteed error (O(eps) where eps is the working machine
! 42: * precision) unless the matrix is very ill-conditioned, in which
! 43: * case a warning is returned. Relevant condition numbers also are
! 44: * calculated and returned.
! 45: *
! 46: * ZSYSVXX accepts user-provided factorizations and equilibration
! 47: * factors; see the definitions of the FACT and EQUED options.
! 48: * Solving with refinement and using a factorization from a previous
! 49: * ZSYSVXX call will also produce a solution with either O(eps)
! 50: * errors or warnings, but we cannot make that claim for general
! 51: * user-provided factorizations and equilibration factors if they
! 52: * differ from what ZSYSVXX would itself produce.
! 53: *
! 54: * Description
! 55: * ===========
! 56: *
! 57: * The following steps are performed:
! 58: *
! 59: * 1. If FACT = 'E', double precision scaling factors are computed to equilibrate
! 60: * the system:
! 61: *
! 62: * diag(S)*A*diag(S) *inv(diag(S))*X = diag(S)*B
! 63: *
! 64: * Whether or not the system will be equilibrated depends on the
! 65: * scaling of the matrix A, but if equilibration is used, A is
! 66: * overwritten by diag(S)*A*diag(S) and B by diag(S)*B.
! 67: *
! 68: * 2. If FACT = 'N' or 'E', the LU decomposition is used to factor
! 69: * the matrix A (after equilibration if FACT = 'E') as
! 70: *
! 71: * A = U * D * U**T, if UPLO = 'U', or
! 72: * A = L * D * L**T, if UPLO = 'L',
! 73: *
! 74: * where U (or L) is a product of permutation and unit upper (lower)
! 75: * triangular matrices, and D is symmetric and block diagonal with
! 76: * 1-by-1 and 2-by-2 diagonal blocks.
! 77: *
! 78: * 3. If some D(i,i)=0, so that D is exactly singular, then the
! 79: * routine returns with INFO = i. Otherwise, the factored form of A
! 80: * is used to estimate the condition number of the matrix A (see
! 81: * argument RCOND). If the reciprocal of the condition number is
! 82: * less than machine precision, the routine still goes on to solve
! 83: * for X and compute error bounds as described below.
! 84: *
! 85: * 4. The system of equations is solved for X using the factored form
! 86: * of A.
! 87: *
! 88: * 5. By default (unless PARAMS(LA_LINRX_ITREF_I) is set to zero),
! 89: * the routine will use iterative refinement to try to get a small
! 90: * error and error bounds. Refinement calculates the residual to at
! 91: * least twice the working precision.
! 92: *
! 93: * 6. If equilibration was used, the matrix X is premultiplied by
! 94: * diag(R) so that it solves the original system before
! 95: * equilibration.
! 96: *
! 97: * Arguments
! 98: * =========
! 99: *
! 100: * Some optional parameters are bundled in the PARAMS array. These
! 101: * settings determine how refinement is performed, but often the
! 102: * defaults are acceptable. If the defaults are acceptable, users
! 103: * can pass NPARAMS = 0 which prevents the source code from accessing
! 104: * the PARAMS argument.
! 105: *
! 106: * FACT (input) CHARACTER*1
! 107: * Specifies whether or not the factored form of the matrix A is
! 108: * supplied on entry, and if not, whether the matrix A should be
! 109: * equilibrated before it is factored.
! 110: * = 'F': On entry, AF and IPIV contain the factored form of A.
! 111: * If EQUED is not 'N', the matrix A has been
! 112: * equilibrated with scaling factors given by S.
! 113: * A, AF, and IPIV are not modified.
! 114: * = 'N': The matrix A will be copied to AF and factored.
! 115: * = 'E': The matrix A will be equilibrated if necessary, then
! 116: * copied to AF and factored.
! 117: *
! 118: * UPLO (input) CHARACTER*1
! 119: * = 'U': Upper triangle of A is stored;
! 120: * = 'L': Lower triangle of A is stored.
! 121: *
! 122: * N (input) INTEGER
! 123: * The number of linear equations, i.e., the order of the
! 124: * matrix A. N >= 0.
! 125: *
! 126: * NRHS (input) INTEGER
! 127: * The number of right hand sides, i.e., the number of columns
! 128: * of the matrices B and X. NRHS >= 0.
! 129: *
! 130: * A (input/output) COMPLEX*16 array, dimension (LDA,N)
! 131: * The symmetric matrix A. If UPLO = 'U', the leading N-by-N
! 132: * upper triangular part of A contains the upper triangular
! 133: * part of the matrix A, and the strictly lower triangular
! 134: * part of A is not referenced. If UPLO = 'L', the leading
! 135: * N-by-N lower triangular part of A contains the lower
! 136: * triangular part of the matrix A, and the strictly upper
! 137: * triangular part of A is not referenced.
! 138: *
! 139: * On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by
! 140: * diag(S)*A*diag(S).
! 141: *
! 142: * LDA (input) INTEGER
! 143: * The leading dimension of the array A. LDA >= max(1,N).
! 144: *
! 145: * AF (input or output) COMPLEX*16 array, dimension (LDAF,N)
! 146: * If FACT = 'F', then AF is an input argument and on entry
! 147: * contains the block diagonal matrix D and the multipliers
! 148: * used to obtain the factor U or L from the factorization A =
! 149: * U*D*U**T or A = L*D*L**T as computed by DSYTRF.
! 150: *
! 151: * If FACT = 'N', then AF is an output argument and on exit
! 152: * returns the block diagonal matrix D and the multipliers
! 153: * used to obtain the factor U or L from the factorization A =
! 154: * U*D*U**T or A = L*D*L**T.
! 155: *
! 156: * LDAF (input) INTEGER
! 157: * The leading dimension of the array AF. LDAF >= max(1,N).
! 158: *
! 159: * IPIV (input or output) INTEGER array, dimension (N)
! 160: * If FACT = 'F', then IPIV is an input argument and on entry
! 161: * contains details of the interchanges and the block
! 162: * structure of D, as determined by DSYTRF. If IPIV(k) > 0,
! 163: * then rows and columns k and IPIV(k) were interchanged and
! 164: * D(k,k) is a 1-by-1 diagonal block. If UPLO = 'U' and
! 165: * IPIV(k) = IPIV(k-1) < 0, then rows and columns k-1 and
! 166: * -IPIV(k) were interchanged and D(k-1:k,k-1:k) is a 2-by-2
! 167: * diagonal block. If UPLO = 'L' and IPIV(k) = IPIV(k+1) < 0,
! 168: * then rows and columns k+1 and -IPIV(k) were interchanged
! 169: * and D(k:k+1,k:k+1) is a 2-by-2 diagonal block.
! 170: *
! 171: * If FACT = 'N', then IPIV is an output argument and on exit
! 172: * contains details of the interchanges and the block
! 173: * structure of D, as determined by DSYTRF.
! 174: *
! 175: * EQUED (input or output) CHARACTER*1
! 176: * Specifies the form of equilibration that was done.
! 177: * = 'N': No equilibration (always true if FACT = 'N').
! 178: * = 'Y': Both row and column equilibration, i.e., A has been
! 179: * replaced by diag(S) * A * diag(S).
! 180: * EQUED is an input argument if FACT = 'F'; otherwise, it is an
! 181: * output argument.
! 182: *
! 183: * S (input or output) DOUBLE PRECISION array, dimension (N)
! 184: * The scale factors for A. If EQUED = 'Y', A is multiplied on
! 185: * the left and right by diag(S). S is an input argument if FACT =
! 186: * 'F'; otherwise, S is an output argument. If FACT = 'F' and EQUED
! 187: * = 'Y', each element of S must be positive. If S is output, each
! 188: * element of S is a power of the radix. If S is input, each element
! 189: * of S should be a power of the radix to ensure a reliable solution
! 190: * and error estimates. Scaling by powers of the radix does not cause
! 191: * rounding errors unless the result underflows or overflows.
! 192: * Rounding errors during scaling lead to refining with a matrix that
! 193: * is not equivalent to the input matrix, producing error estimates
! 194: * that may not be reliable.
! 195: *
! 196: * B (input/output) COMPLEX*16 array, dimension (LDB,NRHS)
! 197: * On entry, the N-by-NRHS right hand side matrix B.
! 198: * On exit,
! 199: * if EQUED = 'N', B is not modified;
! 200: * if EQUED = 'Y', B is overwritten by diag(S)*B;
! 201: *
! 202: * LDB (input) INTEGER
! 203: * The leading dimension of the array B. LDB >= max(1,N).
! 204: *
! 205: * X (output) COMPLEX*16 array, dimension (LDX,NRHS)
! 206: * If INFO = 0, the N-by-NRHS solution matrix X to the original
! 207: * system of equations. Note that A and B are modified on exit if
! 208: * EQUED .ne. 'N', and the solution to the equilibrated system is
! 209: * inv(diag(S))*X.
! 210: *
! 211: * LDX (input) INTEGER
! 212: * The leading dimension of the array X. LDX >= max(1,N).
! 213: *
! 214: * RCOND (output) DOUBLE PRECISION
! 215: * Reciprocal scaled condition number. This is an estimate of the
! 216: * reciprocal Skeel condition number of the matrix A after
! 217: * equilibration (if done). If this is less than the machine
! 218: * precision (in particular, if it is zero), the matrix is singular
! 219: * to working precision. Note that the error may still be small even
! 220: * if this number is very small and the matrix appears ill-
! 221: * conditioned.
! 222: *
! 223: * RPVGRW (output) DOUBLE PRECISION
! 224: * Reciprocal pivot growth. On exit, this contains the reciprocal
! 225: * pivot growth factor norm(A)/norm(U). The "max absolute element"
! 226: * norm is used. If this is much less than 1, then the stability of
! 227: * the LU factorization of the (equilibrated) matrix A could be poor.
! 228: * This also means that the solution X, estimated condition numbers,
! 229: * and error bounds could be unreliable. If factorization fails with
! 230: * 0<INFO<=N, then this contains the reciprocal pivot growth factor
! 231: * for the leading INFO columns of A.
! 232: *
! 233: * BERR (output) DOUBLE PRECISION array, dimension (NRHS)
! 234: * Componentwise relative backward error. This is the
! 235: * componentwise relative backward error of each solution vector X(j)
! 236: * (i.e., the smallest relative change in any element of A or B that
! 237: * makes X(j) an exact solution).
! 238: *
! 239: * N_ERR_BNDS (input) INTEGER
! 240: * Number of error bounds to return for each right hand side
! 241: * and each type (normwise or componentwise). See ERR_BNDS_NORM and
! 242: * ERR_BNDS_COMP below.
! 243: *
! 244: * ERR_BNDS_NORM (output) DOUBLE PRECISION array, dimension (NRHS, N_ERR_BNDS)
! 245: * For each right-hand side, this array contains information about
! 246: * various error bounds and condition numbers corresponding to the
! 247: * normwise relative error, which is defined as follows:
! 248: *
! 249: * Normwise relative error in the ith solution vector:
! 250: * max_j (abs(XTRUE(j,i) - X(j,i)))
! 251: * ------------------------------
! 252: * max_j abs(X(j,i))
! 253: *
! 254: * The array is indexed by the type of error information as described
! 255: * below. There currently are up to three pieces of information
! 256: * returned.
! 257: *
! 258: * The first index in ERR_BNDS_NORM(i,:) corresponds to the ith
! 259: * right-hand side.
! 260: *
! 261: * The second index in ERR_BNDS_NORM(:,err) contains the following
! 262: * three fields:
! 263: * err = 1 "Trust/don't trust" boolean. Trust the answer if the
! 264: * reciprocal condition number is less than the threshold
! 265: * sqrt(n) * dlamch('Epsilon').
! 266: *
! 267: * err = 2 "Guaranteed" error bound: The estimated forward error,
! 268: * almost certainly within a factor of 10 of the true error
! 269: * so long as the next entry is greater than the threshold
! 270: * sqrt(n) * dlamch('Epsilon'). This error bound should only
! 271: * be trusted if the previous boolean is true.
! 272: *
! 273: * err = 3 Reciprocal condition number: Estimated normwise
! 274: * reciprocal condition number. Compared with the threshold
! 275: * sqrt(n) * dlamch('Epsilon') to determine if the error
! 276: * estimate is "guaranteed". These reciprocal condition
! 277: * numbers are 1 / (norm(Z^{-1},inf) * norm(Z,inf)) for some
! 278: * appropriately scaled matrix Z.
! 279: * Let Z = S*A, where S scales each row by a power of the
! 280: * radix so all absolute row sums of Z are approximately 1.
! 281: *
! 282: * See Lapack Working Note 165 for further details and extra
! 283: * cautions.
! 284: *
! 285: * ERR_BNDS_COMP (output) DOUBLE PRECISION array, dimension (NRHS, N_ERR_BNDS)
! 286: * For each right-hand side, this array contains information about
! 287: * various error bounds and condition numbers corresponding to the
! 288: * componentwise relative error, which is defined as follows:
! 289: *
! 290: * Componentwise relative error in the ith solution vector:
! 291: * abs(XTRUE(j,i) - X(j,i))
! 292: * max_j ----------------------
! 293: * abs(X(j,i))
! 294: *
! 295: * The array is indexed by the right-hand side i (on which the
! 296: * componentwise relative error depends), and the type of error
! 297: * information as described below. There currently are up to three
! 298: * pieces of information returned for each right-hand side. If
! 299: * componentwise accuracy is not requested (PARAMS(3) = 0.0), then
! 300: * ERR_BNDS_COMP is not accessed. If N_ERR_BNDS .LT. 3, then at most
! 301: * the first (:,N_ERR_BNDS) entries are returned.
! 302: *
! 303: * The first index in ERR_BNDS_COMP(i,:) corresponds to the ith
! 304: * right-hand side.
! 305: *
! 306: * The second index in ERR_BNDS_COMP(:,err) contains the following
! 307: * three fields:
! 308: * err = 1 "Trust/don't trust" boolean. Trust the answer if the
! 309: * reciprocal condition number is less than the threshold
! 310: * sqrt(n) * dlamch('Epsilon').
! 311: *
! 312: * err = 2 "Guaranteed" error bound: The estimated forward error,
! 313: * almost certainly within a factor of 10 of the true error
! 314: * so long as the next entry is greater than the threshold
! 315: * sqrt(n) * dlamch('Epsilon'). This error bound should only
! 316: * be trusted if the previous boolean is true.
! 317: *
! 318: * err = 3 Reciprocal condition number: Estimated componentwise
! 319: * reciprocal condition number. Compared with the threshold
! 320: * sqrt(n) * dlamch('Epsilon') to determine if the error
! 321: * estimate is "guaranteed". These reciprocal condition
! 322: * numbers are 1 / (norm(Z^{-1},inf) * norm(Z,inf)) for some
! 323: * appropriately scaled matrix Z.
! 324: * Let Z = S*(A*diag(x)), where x is the solution for the
! 325: * current right-hand side and S scales each row of
! 326: * A*diag(x) by a power of the radix so all absolute row
! 327: * sums of Z are approximately 1.
! 328: *
! 329: * See Lapack Working Note 165 for further details and extra
! 330: * cautions.
! 331: *
! 332: * NPARAMS (input) INTEGER
! 333: * Specifies the number of parameters set in PARAMS. If .LE. 0, the
! 334: * PARAMS array is never referenced and default values are used.
! 335: *
! 336: * PARAMS (input / output) DOUBLE PRECISION array, dimension NPARAMS
! 337: * Specifies algorithm parameters. If an entry is .LT. 0.0, then
! 338: * that entry will be filled with default value used for that
! 339: * parameter. Only positions up to NPARAMS are accessed; defaults
! 340: * are used for higher-numbered parameters.
! 341: *
! 342: * PARAMS(LA_LINRX_ITREF_I = 1) : Whether to perform iterative
! 343: * refinement or not.
! 344: * Default: 1.0D+0
! 345: * = 0.0 : No refinement is performed, and no error bounds are
! 346: * computed.
! 347: * = 1.0 : Use the extra-precise refinement algorithm.
! 348: * (other values are reserved for future use)
! 349: *
! 350: * PARAMS(LA_LINRX_ITHRESH_I = 2) : Maximum number of residual
! 351: * computations allowed for refinement.
! 352: * Default: 10
! 353: * Aggressive: Set to 100 to permit convergence using approximate
! 354: * factorizations or factorizations other than LU. If
! 355: * the factorization uses a technique other than
! 356: * Gaussian elimination, the guarantees in
! 357: * err_bnds_norm and err_bnds_comp may no longer be
! 358: * trustworthy.
! 359: *
! 360: * PARAMS(LA_LINRX_CWISE_I = 3) : Flag determining if the code
! 361: * will attempt to find a solution with small componentwise
! 362: * relative error in the double-precision algorithm. Positive
! 363: * is true, 0.0 is false.
! 364: * Default: 1.0 (attempt componentwise convergence)
! 365: *
! 366: * WORK (workspace) COMPLEX*16 array, dimension (2*N)
! 367: *
! 368: * RWORK (workspace) DOUBLE PRECISION array, dimension (2*N)
! 369: *
! 370: * INFO (output) INTEGER
! 371: * = 0: Successful exit. The solution to every right-hand side is
! 372: * guaranteed.
! 373: * < 0: If INFO = -i, the i-th argument had an illegal value
! 374: * > 0 and <= N: U(INFO,INFO) is exactly zero. The factorization
! 375: * has been completed, but the factor U is exactly singular, so
! 376: * the solution and error bounds could not be computed. RCOND = 0
! 377: * is returned.
! 378: * = N+J: The solution corresponding to the Jth right-hand side is
! 379: * not guaranteed. The solutions corresponding to other right-
! 380: * hand sides K with K > J may not be guaranteed as well, but
! 381: * only the first such right-hand side is reported. If a small
! 382: * componentwise error is not requested (PARAMS(3) = 0.0) then
! 383: * the Jth right-hand side is the first with a normwise error
! 384: * bound that is not guaranteed (the smallest J such
! 385: * that ERR_BNDS_NORM(J,1) = 0.0). By default (PARAMS(3) = 1.0)
! 386: * the Jth right-hand side is the first with either a normwise or
! 387: * componentwise error bound that is not guaranteed (the smallest
! 388: * J such that either ERR_BNDS_NORM(J,1) = 0.0 or
! 389: * ERR_BNDS_COMP(J,1) = 0.0). See the definition of
! 390: * ERR_BNDS_NORM(:,1) and ERR_BNDS_COMP(:,1). To get information
! 391: * about all of the right-hand sides check ERR_BNDS_NORM or
! 392: * ERR_BNDS_COMP.
! 393: *
! 394: * ==================================================================
! 395: *
! 396: * .. Parameters ..
! 397: DOUBLE PRECISION ZERO, ONE
! 398: PARAMETER ( ZERO = 0.0D+0, ONE = 1.0D+0 )
! 399: INTEGER FINAL_NRM_ERR_I, FINAL_CMP_ERR_I, BERR_I
! 400: INTEGER RCOND_I, NRM_RCOND_I, NRM_ERR_I, CMP_RCOND_I
! 401: INTEGER CMP_ERR_I, PIV_GROWTH_I
! 402: PARAMETER ( FINAL_NRM_ERR_I = 1, FINAL_CMP_ERR_I = 2,
! 403: $ BERR_I = 3 )
! 404: PARAMETER ( RCOND_I = 4, NRM_RCOND_I = 5, NRM_ERR_I = 6 )
! 405: PARAMETER ( CMP_RCOND_I = 7, CMP_ERR_I = 8,
! 406: $ PIV_GROWTH_I = 9 )
! 407: * ..
! 408: * .. Local Scalars ..
! 409: LOGICAL EQUIL, NOFACT, RCEQU
! 410: INTEGER INFEQU, J
! 411: DOUBLE PRECISION AMAX, BIGNUM, SMIN, SMAX, SCOND, SMLNUM
! 412: * ..
! 413: * .. External Functions ..
! 414: EXTERNAL LSAME, DLAMCH, ZLA_SYRPVGRW
! 415: LOGICAL LSAME
! 416: DOUBLE PRECISION DLAMCH, ZLA_SYRPVGRW
! 417: * ..
! 418: * .. External Subroutines ..
! 419: EXTERNAL ZSYCON, ZSYEQUB, ZSYTRF, ZSYTRS, ZLACPY,
! 420: $ ZLAQSY, XERBLA, ZLASCL2, ZSYRFSX
! 421: * ..
! 422: * .. Intrinsic Functions ..
! 423: INTRINSIC MAX, MIN
! 424: * ..
! 425: * .. Executable Statements ..
! 426: *
! 427: INFO = 0
! 428: NOFACT = LSAME( FACT, 'N' )
! 429: EQUIL = LSAME( FACT, 'E' )
! 430: SMLNUM = DLAMCH( 'Safe minimum' )
! 431: BIGNUM = ONE / SMLNUM
! 432: IF( NOFACT .OR. EQUIL ) THEN
! 433: EQUED = 'N'
! 434: RCEQU = .FALSE.
! 435: ELSE
! 436: RCEQU = LSAME( EQUED, 'Y' )
! 437: ENDIF
! 438: *
! 439: * Default is failure. If an input parameter is wrong or
! 440: * factorization fails, make everything look horrible. Only the
! 441: * pivot growth is set here, the rest is initialized in ZSYRFSX.
! 442: *
! 443: RPVGRW = ZERO
! 444: *
! 445: * Test the input parameters. PARAMS is not tested until ZSYRFSX.
! 446: *
! 447: IF( .NOT.NOFACT .AND. .NOT.EQUIL .AND. .NOT.
! 448: $ LSAME( FACT, 'F' ) ) THEN
! 449: INFO = -1
! 450: ELSE IF( .NOT.LSAME(UPLO, 'U') .AND.
! 451: $ .NOT.LSAME(UPLO, 'L') ) THEN
! 452: INFO = -2
! 453: ELSE IF( N.LT.0 ) THEN
! 454: INFO = -3
! 455: ELSE IF( NRHS.LT.0 ) THEN
! 456: INFO = -4
! 457: ELSE IF( LDA.LT.MAX( 1, N ) ) THEN
! 458: INFO = -6
! 459: ELSE IF( LDAF.LT.MAX( 1, N ) ) THEN
! 460: INFO = -8
! 461: ELSE IF( LSAME( FACT, 'F' ) .AND. .NOT.
! 462: $ ( RCEQU .OR. LSAME( EQUED, 'N' ) ) ) THEN
! 463: INFO = -9
! 464: ELSE
! 465: IF ( RCEQU ) THEN
! 466: SMIN = BIGNUM
! 467: SMAX = ZERO
! 468: DO 10 J = 1, N
! 469: SMIN = MIN( SMIN, S( J ) )
! 470: SMAX = MAX( SMAX, S( J ) )
! 471: 10 CONTINUE
! 472: IF( SMIN.LE.ZERO ) THEN
! 473: INFO = -10
! 474: ELSE IF( N.GT.0 ) THEN
! 475: SCOND = MAX( SMIN, SMLNUM ) / MIN( SMAX, BIGNUM )
! 476: ELSE
! 477: SCOND = ONE
! 478: END IF
! 479: END IF
! 480: IF( INFO.EQ.0 ) THEN
! 481: IF( LDB.LT.MAX( 1, N ) ) THEN
! 482: INFO = -12
! 483: ELSE IF( LDX.LT.MAX( 1, N ) ) THEN
! 484: INFO = -14
! 485: END IF
! 486: END IF
! 487: END IF
! 488: *
! 489: IF( INFO.NE.0 ) THEN
! 490: CALL XERBLA( 'ZSYSVXX', -INFO )
! 491: RETURN
! 492: END IF
! 493: *
! 494: IF( EQUIL ) THEN
! 495: *
! 496: * Compute row and column scalings to equilibrate the matrix A.
! 497: *
! 498: CALL ZSYEQUB( UPLO, N, A, LDA, S, SCOND, AMAX, WORK, INFEQU )
! 499: IF( INFEQU.EQ.0 ) THEN
! 500: *
! 501: * Equilibrate the matrix.
! 502: *
! 503: CALL ZLAQSY( UPLO, N, A, LDA, S, SCOND, AMAX, EQUED )
! 504: RCEQU = LSAME( EQUED, 'Y' )
! 505: END IF
! 506:
! 507: END IF
! 508: *
! 509: * Scale the right hand-side.
! 510: *
! 511: IF( RCEQU ) CALL ZLASCL2( N, NRHS, S, B, LDB )
! 512: *
! 513: IF( NOFACT .OR. EQUIL ) THEN
! 514: *
! 515: * Compute the LDL^T or UDU^T factorization of A.
! 516: *
! 517: CALL ZLACPY( UPLO, N, N, A, LDA, AF, LDAF )
! 518: CALL ZSYTRF( UPLO, N, AF, LDAF, IPIV, WORK, 5*MAX(1,N), INFO )
! 519: *
! 520: * Return if INFO is non-zero.
! 521: *
! 522: IF( INFO.GT.0 ) THEN
! 523: *
! 524: * Pivot in column INFO is exactly 0
! 525: * Compute the reciprocal pivot growth factor of the
! 526: * leading rank-deficient INFO columns of A.
! 527: *
! 528: IF ( N.GT.0 )
! 529: $ RPVGRW = ZLA_SYRPVGRW( UPLO, N, INFO, A, LDA, AF,
! 530: $ LDAF, IPIV, RWORK )
! 531: RETURN
! 532: END IF
! 533: END IF
! 534: *
! 535: * Compute the reciprocal pivot growth factor RPVGRW.
! 536: *
! 537: IF ( N.GT.0 )
! 538: $ RPVGRW = ZLA_SYRPVGRW( UPLO, N, INFO, A, LDA, AF, LDAF,
! 539: $ IPIV, RWORK )
! 540: *
! 541: * Compute the solution matrix X.
! 542: *
! 543: CALL ZLACPY( 'Full', N, NRHS, B, LDB, X, LDX )
! 544: CALL ZSYTRS( UPLO, N, NRHS, AF, LDAF, IPIV, X, LDX, INFO )
! 545: *
! 546: * Use iterative refinement to improve the computed solution and
! 547: * compute error bounds and backward error estimates for it.
! 548: *
! 549: CALL ZSYRFSX( UPLO, EQUED, N, NRHS, A, LDA, AF, LDAF, IPIV,
! 550: $ S, B, LDB, X, LDX, RCOND, BERR, N_ERR_BNDS, ERR_BNDS_NORM,
! 551: $ ERR_BNDS_COMP, NPARAMS, PARAMS, WORK, RWORK, INFO )
! 552: *
! 553: * Scale solutions.
! 554: *
! 555: IF ( RCEQU ) THEN
! 556: CALL ZLASCL2 (N, NRHS, S, X, LDX )
! 557: END IF
! 558: *
! 559: RETURN
! 560: *
! 561: * End of ZSYSVXX
! 562: *
! 563: END
CVSweb interface <joel.bertrand@systella.fr>