1: *> \brief \b ZHETRF_AA
2: *
3: * =========== DOCUMENTATION ===========
4: *
5: * Online html documentation available at
6: * http://www.netlib.org/lapack/explore-html/
7: *
8: *> \htmlonly
9: *> Download ZHETRF_AA + dependencies
10: *> <a href="http://www.netlib.org/cgi-bin/netlibfiles.tgz?format=tgz&filename=/lapack/lapack_routine/zhetrf_aa.f">
11: *> [TGZ]</a>
12: *> <a href="http://www.netlib.org/cgi-bin/netlibfiles.zip?format=zip&filename=/lapack/lapack_routine/zhetrf_aa.f">
13: *> [ZIP]</a>
14: *> <a href="http://www.netlib.org/cgi-bin/netlibfiles.txt?format=txt&filename=/lapack/lapack_routine/zhetrf_aa.f">
15: *> [TXT]</a>
16: *> \endhtmlonly
17: *
18: * Definition:
19: * ===========
20: *
21: * SUBROUTINE ZHETRF_AA( UPLO, N, A, LDA, IPIV, WORK, LWORK, INFO )
22: *
23: * .. Scalar Arguments ..
24: * CHARACTER UPLO
25: * INTEGER N, LDA, LWORK, INFO
26: * ..
27: * .. Array Arguments ..
28: * INTEGER IPIV( * )
29: * COMPLEX*16 A( LDA, * ), WORK( * )
30: * ..
31: *
32: *> \par Purpose:
33: * =============
34: *>
35: *> \verbatim
36: *>
37: *> ZHETRF_AA computes the factorization of a complex hermitian matrix A
38: *> using the Aasen's algorithm. The form of the factorization is
39: *>
40: *> A = U**H*T*U or A = L*T*L**H
41: *>
42: *> where U (or L) is a product of permutation and unit upper (lower)
43: *> triangular matrices, and T is a hermitian tridiagonal matrix.
44: *>
45: *> This is the blocked version of the algorithm, calling Level 3 BLAS.
46: *> \endverbatim
47: *
48: * Arguments:
49: * ==========
50: *
51: *> \param[in] UPLO
52: *> \verbatim
53: *> UPLO is CHARACTER*1
54: *> = 'U': Upper triangle of A is stored;
55: *> = 'L': Lower triangle of A is stored.
56: *> \endverbatim
57: *>
58: *> \param[in] N
59: *> \verbatim
60: *> N is INTEGER
61: *> The order of the matrix A. N >= 0.
62: *> \endverbatim
63: *>
64: *> \param[in,out] A
65: *> \verbatim
66: *> A is COMPLEX*16 array, dimension (LDA,N)
67: *> On entry, the hermitian matrix A. If UPLO = 'U', the leading
68: *> N-by-N upper triangular part of A contains the upper
69: *> triangular part of the matrix A, and the strictly lower
70: *> triangular part of A is not referenced. If UPLO = 'L', the
71: *> leading N-by-N lower triangular part of A contains the lower
72: *> triangular part of the matrix A, and the strictly upper
73: *> triangular part of A is not referenced.
74: *>
75: *> On exit, the tridiagonal matrix is stored in the diagonals
76: *> and the subdiagonals of A just below (or above) the diagonals,
77: *> and L is stored below (or above) the subdiaonals, when UPLO
78: *> is 'L' (or 'U').
79: *> \endverbatim
80: *>
81: *> \param[in] LDA
82: *> \verbatim
83: *> LDA is INTEGER
84: *> The leading dimension of the array A. LDA >= max(1,N).
85: *> \endverbatim
86: *>
87: *> \param[out] IPIV
88: *> \verbatim
89: *> IPIV is INTEGER array, dimension (N)
90: *> On exit, it contains the details of the interchanges, i.e.,
91: *> the row and column k of A were interchanged with the
92: *> row and column IPIV(k).
93: *> \endverbatim
94: *>
95: *> \param[out] WORK
96: *> \verbatim
97: *> WORK is COMPLEX*16 array, dimension (MAX(1,LWORK))
98: *> On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
99: *> \endverbatim
100: *>
101: *> \param[in] LWORK
102: *> \verbatim
103: *> LWORK is INTEGER
104: *> The length of WORK. LWORK >= MAX(1,2*N). For optimum performance
105: *> LWORK >= N*(1+NB), where NB is the optimal blocksize.
106: *>
107: *> If LWORK = -1, then a workspace query is assumed; the routine
108: *> only calculates the optimal size of the WORK array, returns
109: *> this value as the first entry of the WORK array, and no error
110: *> message related to LWORK is issued by XERBLA.
111: *> \endverbatim
112: *>
113: *> \param[out] INFO
114: *> \verbatim
115: *> INFO is INTEGER
116: *> = 0: successful exit
117: *> < 0: if INFO = -i, the i-th argument had an illegal value.
118: *> \endverbatim
119: *
120: * Authors:
121: * ========
122: *
123: *> \author Univ. of Tennessee
124: *> \author Univ. of California Berkeley
125: *> \author Univ. of Colorado Denver
126: *> \author NAG Ltd.
127: *
128: *> \ingroup complex16HEcomputational
129: *
130: * =====================================================================
131: SUBROUTINE ZHETRF_AA( UPLO, N, A, LDA, IPIV, WORK, LWORK, INFO)
132: *
133: * -- LAPACK computational routine --
134: * -- LAPACK is a software package provided by Univ. of Tennessee, --
135: * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
136: *
137: IMPLICIT NONE
138: *
139: * .. Scalar Arguments ..
140: CHARACTER UPLO
141: INTEGER N, LDA, LWORK, INFO
142: * ..
143: * .. Array Arguments ..
144: INTEGER IPIV( * )
145: COMPLEX*16 A( LDA, * ), WORK( * )
146: * ..
147: *
148: * =====================================================================
149: * .. Parameters ..
150: COMPLEX*16 ZERO, ONE
151: PARAMETER ( ZERO = (0.0D+0, 0.0D+0), ONE = (1.0D+0, 0.0D+0) )
152: *
153: * .. Local Scalars ..
154: LOGICAL LQUERY, UPPER
155: INTEGER J, LWKOPT
156: INTEGER NB, MJ, NJ, K1, K2, J1, J2, J3, JB
157: COMPLEX*16 ALPHA
158: * ..
159: * .. External Functions ..
160: LOGICAL LSAME
161: INTEGER ILAENV
162: EXTERNAL LSAME, ILAENV
163: * ..
164: * .. External Subroutines ..
165: EXTERNAL ZLAHEF_AA, ZGEMM, ZGEMV, ZCOPY, ZSCAL, ZSWAP, XERBLA
166: * ..
167: * .. Intrinsic Functions ..
168: INTRINSIC DBLE, DCONJG, MAX
169: * ..
170: * .. Executable Statements ..
171: *
172: * Determine the block size
173: *
174: NB = ILAENV( 1, 'ZHETRF_AA', UPLO, N, -1, -1, -1 )
175: *
176: * Test the input parameters.
177: *
178: INFO = 0
179: UPPER = LSAME( UPLO, 'U' )
180: LQUERY = ( LWORK.EQ.-1 )
181: IF( .NOT.UPPER .AND. .NOT.LSAME( UPLO, 'L' ) ) THEN
182: INFO = -1
183: ELSE IF( N.LT.0 ) THEN
184: INFO = -2
185: ELSE IF( LDA.LT.MAX( 1, N ) ) THEN
186: INFO = -4
187: ELSE IF( LWORK.LT.MAX( 1, 2*N ) .AND. .NOT.LQUERY ) THEN
188: INFO = -7
189: END IF
190: *
191: IF( INFO.EQ.0 ) THEN
192: LWKOPT = (NB+1)*N
193: WORK( 1 ) = LWKOPT
194: END IF
195: *
196: IF( INFO.NE.0 ) THEN
197: CALL XERBLA( 'ZHETRF_AA', -INFO )
198: RETURN
199: ELSE IF( LQUERY ) THEN
200: RETURN
201: END IF
202: *
203: * Quick return
204: *
205: IF ( N.EQ.0 ) THEN
206: RETURN
207: ENDIF
208: IPIV( 1 ) = 1
209: IF ( N.EQ.1 ) THEN
210: A( 1, 1 ) = DBLE( A( 1, 1 ) )
211: RETURN
212: END IF
213: *
214: * Adjust block size based on the workspace size
215: *
216: IF( LWORK.LT.((1+NB)*N) ) THEN
217: NB = ( LWORK-N ) / N
218: END IF
219: *
220: IF( UPPER ) THEN
221: *
222: * .....................................................
223: * Factorize A as U**H*D*U using the upper triangle of A
224: * .....................................................
225: *
226: * copy first row A(1, 1:N) into H(1:n) (stored in WORK(1:N))
227: *
228: CALL ZCOPY( N, A( 1, 1 ), LDA, WORK( 1 ), 1 )
229: *
230: * J is the main loop index, increasing from 1 to N in steps of
231: * JB, where JB is the number of columns factorized by ZLAHEF;
232: * JB is either NB, or N-J+1 for the last block
233: *
234: J = 0
235: 10 CONTINUE
236: IF( J.GE.N )
237: $ GO TO 20
238: *
239: * each step of the main loop
240: * J is the last column of the previous panel
241: * J1 is the first column of the current panel
242: * K1 identifies if the previous column of the panel has been
243: * explicitly stored, e.g., K1=1 for the first panel, and
244: * K1=0 for the rest
245: *
246: J1 = J + 1
247: JB = MIN( N-J1+1, NB )
248: K1 = MAX(1, J)-J
249: *
250: * Panel factorization
251: *
252: CALL ZLAHEF_AA( UPLO, 2-K1, N-J, JB,
253: $ A( MAX(1, J), J+1 ), LDA,
254: $ IPIV( J+1 ), WORK, N, WORK( N*NB+1 ) )
255: *
256: * Adjust IPIV and apply it back (J-th step picks (J+1)-th pivot)
257: *
258: DO J2 = J+2, MIN(N, J+JB+1)
259: IPIV( J2 ) = IPIV( J2 ) + J
260: IF( (J2.NE.IPIV(J2)) .AND. ((J1-K1).GT.2) ) THEN
261: CALL ZSWAP( J1-K1-2, A( 1, J2 ), 1,
262: $ A( 1, IPIV(J2) ), 1 )
263: END IF
264: END DO
265: J = J + JB
266: *
267: * Trailing submatrix update, where
268: * the row A(J1-1, J2-1:N) stores U(J1, J2+1:N) and
269: * WORK stores the current block of the auxiriarly matrix H
270: *
271: IF( J.LT.N ) THEN
272: *
273: * if the first panel and JB=1 (NB=1), then nothing to do
274: *
275: IF( J1.GT.1 .OR. JB.GT.1 ) THEN
276: *
277: * Merge rank-1 update with BLAS-3 update
278: *
279: ALPHA = DCONJG( A( J, J+1 ) )
280: A( J, J+1 ) = ONE
281: CALL ZCOPY( N-J, A( J-1, J+1 ), LDA,
282: $ WORK( (J+1-J1+1)+JB*N ), 1 )
283: CALL ZSCAL( N-J, ALPHA, WORK( (J+1-J1+1)+JB*N ), 1 )
284: *
285: * K1 identifies if the previous column of the panel has been
286: * explicitly stored, e.g., K1=0 and K2=1 for the first panel,
287: * and K1=1 and K2=0 for the rest
288: *
289: IF( J1.GT.1 ) THEN
290: *
291: * Not first panel
292: *
293: K2 = 1
294: ELSE
295: *
296: * First panel
297: *
298: K2 = 0
299: *
300: * First update skips the first column
301: *
302: JB = JB - 1
303: END IF
304: *
305: DO J2 = J+1, N, NB
306: NJ = MIN( NB, N-J2+1 )
307: *
308: * Update (J2, J2) diagonal block with ZGEMV
309: *
310: J3 = J2
311: DO MJ = NJ-1, 1, -1
312: CALL ZGEMM( 'Conjugate transpose', 'Transpose',
313: $ 1, MJ, JB+1,
314: $ -ONE, A( J1-K2, J3 ), LDA,
315: $ WORK( (J3-J1+1)+K1*N ), N,
316: $ ONE, A( J3, J3 ), LDA )
317: J3 = J3 + 1
318: END DO
319: *
320: * Update off-diagonal block of J2-th block row with ZGEMM
321: *
322: CALL ZGEMM( 'Conjugate transpose', 'Transpose',
323: $ NJ, N-J3+1, JB+1,
324: $ -ONE, A( J1-K2, J2 ), LDA,
325: $ WORK( (J3-J1+1)+K1*N ), N,
326: $ ONE, A( J2, J3 ), LDA )
327: END DO
328: *
329: * Recover T( J, J+1 )
330: *
331: A( J, J+1 ) = DCONJG( ALPHA )
332: END IF
333: *
334: * WORK(J+1, 1) stores H(J+1, 1)
335: *
336: CALL ZCOPY( N-J, A( J+1, J+1 ), LDA, WORK( 1 ), 1 )
337: END IF
338: GO TO 10
339: ELSE
340: *
341: * .....................................................
342: * Factorize A as L*D*L**H using the lower triangle of A
343: * .....................................................
344: *
345: * copy first column A(1:N, 1) into H(1:N, 1)
346: * (stored in WORK(1:N))
347: *
348: CALL ZCOPY( N, A( 1, 1 ), 1, WORK( 1 ), 1 )
349: *
350: * J is the main loop index, increasing from 1 to N in steps of
351: * JB, where JB is the number of columns factorized by ZLAHEF;
352: * JB is either NB, or N-J+1 for the last block
353: *
354: J = 0
355: 11 CONTINUE
356: IF( J.GE.N )
357: $ GO TO 20
358: *
359: * each step of the main loop
360: * J is the last column of the previous panel
361: * J1 is the first column of the current panel
362: * K1 identifies if the previous column of the panel has been
363: * explicitly stored, e.g., K1=1 for the first panel, and
364: * K1=0 for the rest
365: *
366: J1 = J+1
367: JB = MIN( N-J1+1, NB )
368: K1 = MAX(1, J)-J
369: *
370: * Panel factorization
371: *
372: CALL ZLAHEF_AA( UPLO, 2-K1, N-J, JB,
373: $ A( J+1, MAX(1, J) ), LDA,
374: $ IPIV( J+1 ), WORK, N, WORK( N*NB+1 ) )
375: *
376: * Adjust IPIV and apply it back (J-th step picks (J+1)-th pivot)
377: *
378: DO J2 = J+2, MIN(N, J+JB+1)
379: IPIV( J2 ) = IPIV( J2 ) + J
380: IF( (J2.NE.IPIV(J2)) .AND. ((J1-K1).GT.2) ) THEN
381: CALL ZSWAP( J1-K1-2, A( J2, 1 ), LDA,
382: $ A( IPIV(J2), 1 ), LDA )
383: END IF
384: END DO
385: J = J + JB
386: *
387: * Trailing submatrix update, where
388: * A(J2+1, J1-1) stores L(J2+1, J1) and
389: * WORK(J2+1, 1) stores H(J2+1, 1)
390: *
391: IF( J.LT.N ) THEN
392: *
393: * if the first panel and JB=1 (NB=1), then nothing to do
394: *
395: IF( J1.GT.1 .OR. JB.GT.1 ) THEN
396: *
397: * Merge rank-1 update with BLAS-3 update
398: *
399: ALPHA = DCONJG( A( J+1, J ) )
400: A( J+1, J ) = ONE
401: CALL ZCOPY( N-J, A( J+1, J-1 ), 1,
402: $ WORK( (J+1-J1+1)+JB*N ), 1 )
403: CALL ZSCAL( N-J, ALPHA, WORK( (J+1-J1+1)+JB*N ), 1 )
404: *
405: * K1 identifies if the previous column of the panel has been
406: * explicitly stored, e.g., K1=0 and K2=1 for the first panel,
407: * and K1=1 and K2=0 for the rest
408: *
409: IF( J1.GT.1 ) THEN
410: *
411: * Not first panel
412: *
413: K2 = 1
414: ELSE
415: *
416: * First panel
417: *
418: K2 = 0
419: *
420: * First update skips the first column
421: *
422: JB = JB - 1
423: END IF
424: *
425: DO J2 = J+1, N, NB
426: NJ = MIN( NB, N-J2+1 )
427: *
428: * Update (J2, J2) diagonal block with ZGEMV
429: *
430: J3 = J2
431: DO MJ = NJ-1, 1, -1
432: CALL ZGEMM( 'No transpose', 'Conjugate transpose',
433: $ MJ, 1, JB+1,
434: $ -ONE, WORK( (J3-J1+1)+K1*N ), N,
435: $ A( J3, J1-K2 ), LDA,
436: $ ONE, A( J3, J3 ), LDA )
437: J3 = J3 + 1
438: END DO
439: *
440: * Update off-diagonal block of J2-th block column with ZGEMM
441: *
442: CALL ZGEMM( 'No transpose', 'Conjugate transpose',
443: $ N-J3+1, NJ, JB+1,
444: $ -ONE, WORK( (J3-J1+1)+K1*N ), N,
445: $ A( J2, J1-K2 ), LDA,
446: $ ONE, A( J3, J2 ), LDA )
447: END DO
448: *
449: * Recover T( J+1, J )
450: *
451: A( J+1, J ) = DCONJG( ALPHA )
452: END IF
453: *
454: * WORK(J+1, 1) stores H(J+1, 1)
455: *
456: CALL ZCOPY( N-J, A( J+1, J+1 ), 1, WORK( 1 ), 1 )
457: END IF
458: GO TO 11
459: END IF
460: *
461: 20 CONTINUE
462: WORK( 1 ) = LWKOPT
463: RETURN
464: *
465: * End of ZHETRF_AA
466: *
467: END
CVSweb interface <joel.bertrand@systella.fr>