Annotation of rpl/lapack/lapack/dstevr.f, revision 1.6
1.1 bertrand 1: SUBROUTINE DSTEVR( JOBZ, RANGE, N, D, E, VL, VU, IL, IU, ABSTOL,
2: $ M, W, Z, LDZ, ISUPPZ, WORK, LWORK, IWORK,
3: $ LIWORK, INFO )
4: *
5: * -- LAPACK driver routine (version 3.2) --
6: * -- LAPACK is a software package provided by Univ. of Tennessee, --
7: * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
8: * November 2006
9: *
10: * .. Scalar Arguments ..
11: CHARACTER JOBZ, RANGE
12: INTEGER IL, INFO, IU, LDZ, LIWORK, LWORK, M, N
13: DOUBLE PRECISION ABSTOL, VL, VU
14: * ..
15: * .. Array Arguments ..
16: INTEGER ISUPPZ( * ), IWORK( * )
17: DOUBLE PRECISION D( * ), E( * ), W( * ), WORK( * ), Z( LDZ, * )
18: * ..
19: *
20: * Purpose
21: * =======
22: *
23: * DSTEVR computes selected eigenvalues and, optionally, eigenvectors
24: * of a real symmetric tridiagonal matrix T. Eigenvalues and
25: * eigenvectors can be selected by specifying either a range of values
26: * or a range of indices for the desired eigenvalues.
27: *
28: * Whenever possible, DSTEVR calls DSTEMR to compute the
29: * eigenspectrum using Relatively Robust Representations. DSTEMR
30: * computes eigenvalues by the dqds algorithm, while orthogonal
31: * eigenvectors are computed from various "good" L D L^T representations
32: * (also known as Relatively Robust Representations). Gram-Schmidt
33: * orthogonalization is avoided as far as possible. More specifically,
34: * the various steps of the algorithm are as follows. For the i-th
35: * unreduced block of T,
36: * (a) Compute T - sigma_i = L_i D_i L_i^T, such that L_i D_i L_i^T
37: * is a relatively robust representation,
38: * (b) Compute the eigenvalues, lambda_j, of L_i D_i L_i^T to high
39: * relative accuracy by the dqds algorithm,
40: * (c) If there is a cluster of close eigenvalues, "choose" sigma_i
41: * close to the cluster, and go to step (a),
42: * (d) Given the approximate eigenvalue lambda_j of L_i D_i L_i^T,
43: * compute the corresponding eigenvector by forming a
44: * rank-revealing twisted factorization.
45: * The desired accuracy of the output can be specified by the input
46: * parameter ABSTOL.
47: *
48: * For more details, see "A new O(n^2) algorithm for the symmetric
49: * tridiagonal eigenvalue/eigenvector problem", by Inderjit Dhillon,
50: * Computer Science Division Technical Report No. UCB//CSD-97-971,
51: * UC Berkeley, May 1997.
52: *
53: *
54: * Note 1 : DSTEVR calls DSTEMR when the full spectrum is requested
55: * on machines which conform to the ieee-754 floating point standard.
56: * DSTEVR calls DSTEBZ and DSTEIN on non-ieee machines and
57: * when partial spectrum requests are made.
58: *
59: * Normal execution of DSTEMR may create NaNs and infinities and
60: * hence may abort due to a floating point exception in environments
61: * which do not handle NaNs and infinities in the ieee standard default
62: * manner.
63: *
64: * Arguments
65: * =========
66: *
67: * JOBZ (input) CHARACTER*1
68: * = 'N': Compute eigenvalues only;
69: * = 'V': Compute eigenvalues and eigenvectors.
70: *
71: * RANGE (input) CHARACTER*1
72: * = 'A': all eigenvalues will be found.
73: * = 'V': all eigenvalues in the half-open interval (VL,VU]
74: * will be found.
75: * = 'I': the IL-th through IU-th eigenvalues will be found.
76: ********** For RANGE = 'V' or 'I' and IU - IL < N - 1, DSTEBZ and
77: ********** DSTEIN are called
78: *
79: * N (input) INTEGER
80: * The order of the matrix. N >= 0.
81: *
82: * D (input/output) DOUBLE PRECISION array, dimension (N)
83: * On entry, the n diagonal elements of the tridiagonal matrix
84: * A.
85: * On exit, D may be multiplied by a constant factor chosen
86: * to avoid over/underflow in computing the eigenvalues.
87: *
88: * E (input/output) DOUBLE PRECISION array, dimension (max(1,N-1))
89: * On entry, the (n-1) subdiagonal elements of the tridiagonal
90: * matrix A in elements 1 to N-1 of E.
91: * On exit, E may be multiplied by a constant factor chosen
92: * to avoid over/underflow in computing the eigenvalues.
93: *
94: * VL (input) DOUBLE PRECISION
95: * VU (input) DOUBLE PRECISION
96: * If RANGE='V', the lower and upper bounds of the interval to
97: * be searched for eigenvalues. VL < VU.
98: * Not referenced if RANGE = 'A' or 'I'.
99: *
100: * IL (input) INTEGER
101: * IU (input) INTEGER
102: * If RANGE='I', the indices (in ascending order) of the
103: * smallest and largest eigenvalues to be returned.
104: * 1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0.
105: * Not referenced if RANGE = 'A' or 'V'.
106: *
107: * ABSTOL (input) DOUBLE PRECISION
108: * The absolute error tolerance for the eigenvalues.
109: * An approximate eigenvalue is accepted as converged
110: * when it is determined to lie in an interval [a,b]
111: * of width less than or equal to
112: *
113: * ABSTOL + EPS * max( |a|,|b| ) ,
114: *
115: * where EPS is the machine precision. If ABSTOL is less than
116: * or equal to zero, then EPS*|T| will be used in its place,
117: * where |T| is the 1-norm of the tridiagonal matrix obtained
118: * by reducing A to tridiagonal form.
119: *
120: * See "Computing Small Singular Values of Bidiagonal Matrices
121: * with Guaranteed High Relative Accuracy," by Demmel and
122: * Kahan, LAPACK Working Note #3.
123: *
124: * If high relative accuracy is important, set ABSTOL to
125: * DLAMCH( 'Safe minimum' ). Doing so will guarantee that
126: * eigenvalues are computed to high relative accuracy when
127: * possible in future releases. The current code does not
128: * make any guarantees about high relative accuracy, but
129: * future releases will. See J. Barlow and J. Demmel,
130: * "Computing Accurate Eigensystems of Scaled Diagonally
131: * Dominant Matrices", LAPACK Working Note #7, for a discussion
132: * of which matrices define their eigenvalues to high relative
133: * accuracy.
134: *
135: * M (output) INTEGER
136: * The total number of eigenvalues found. 0 <= M <= N.
137: * If RANGE = 'A', M = N, and if RANGE = 'I', M = IU-IL+1.
138: *
139: * W (output) DOUBLE PRECISION array, dimension (N)
140: * The first M elements contain the selected eigenvalues in
141: * ascending order.
142: *
143: * Z (output) DOUBLE PRECISION array, dimension (LDZ, max(1,M) )
144: * If JOBZ = 'V', then if INFO = 0, the first M columns of Z
145: * contain the orthonormal eigenvectors of the matrix A
146: * corresponding to the selected eigenvalues, with the i-th
147: * column of Z holding the eigenvector associated with W(i).
148: * Note: the user must ensure that at least max(1,M) columns are
149: * supplied in the array Z; if RANGE = 'V', the exact value of M
150: * is not known in advance and an upper bound must be used.
151: *
152: * LDZ (input) INTEGER
153: * The leading dimension of the array Z. LDZ >= 1, and if
154: * JOBZ = 'V', LDZ >= max(1,N).
155: *
156: * ISUPPZ (output) INTEGER array, dimension ( 2*max(1,M) )
157: * The support of the eigenvectors in Z, i.e., the indices
158: * indicating the nonzero elements in Z. The i-th eigenvector
159: * is nonzero only in elements ISUPPZ( 2*i-1 ) through
160: * ISUPPZ( 2*i ).
161: ********** Implemented only for RANGE = 'A' or 'I' and IU - IL = N - 1
162: *
163: * WORK (workspace/output) DOUBLE PRECISION array, dimension (MAX(1,LWORK))
164: * On exit, if INFO = 0, WORK(1) returns the optimal (and
165: * minimal) LWORK.
166: *
167: * LWORK (input) INTEGER
168: * The dimension of the array WORK. LWORK >= max(1,20*N).
169: *
170: * If LWORK = -1, then a workspace query is assumed; the routine
171: * only calculates the optimal sizes of the WORK and IWORK
172: * arrays, returns these values as the first entries of the WORK
173: * and IWORK arrays, and no error message related to LWORK or
174: * LIWORK is issued by XERBLA.
175: *
176: * IWORK (workspace/output) INTEGER array, dimension (MAX(1,LIWORK))
177: * On exit, if INFO = 0, IWORK(1) returns the optimal (and
178: * minimal) LIWORK.
179: *
180: * LIWORK (input) INTEGER
181: * The dimension of the array IWORK. LIWORK >= max(1,10*N).
182: *
183: * If LIWORK = -1, then a workspace query is assumed; the
184: * routine only calculates the optimal sizes of the WORK and
185: * IWORK arrays, returns these values as the first entries of
186: * the WORK and IWORK arrays, and no error message related to
187: * LWORK or LIWORK is issued by XERBLA.
188: *
189: * INFO (output) INTEGER
190: * = 0: successful exit
191: * < 0: if INFO = -i, the i-th argument had an illegal value
192: * > 0: Internal error
193: *
194: * Further Details
195: * ===============
196: *
197: * Based on contributions by
198: * Inderjit Dhillon, IBM Almaden, USA
199: * Osni Marques, LBNL/NERSC, USA
200: * Ken Stanley, Computer Science Division, University of
201: * California at Berkeley, USA
202: *
203: * =====================================================================
204: *
205: * .. Parameters ..
206: DOUBLE PRECISION ZERO, ONE, TWO
207: PARAMETER ( ZERO = 0.0D+0, ONE = 1.0D+0, TWO = 2.0D+0 )
208: * ..
209: * .. Local Scalars ..
210: LOGICAL ALLEIG, INDEIG, TEST, LQUERY, VALEIG, WANTZ,
211: $ TRYRAC
212: CHARACTER ORDER
213: INTEGER I, IEEEOK, IMAX, INDIBL, INDIFL, INDISP,
214: $ INDIWO, ISCALE, ITMP1, J, JJ, LIWMIN, LWMIN,
215: $ NSPLIT
216: DOUBLE PRECISION BIGNUM, EPS, RMAX, RMIN, SAFMIN, SIGMA, SMLNUM,
217: $ TMP1, TNRM, VLL, VUU
218: * ..
219: * .. External Functions ..
220: LOGICAL LSAME
221: INTEGER ILAENV
222: DOUBLE PRECISION DLAMCH, DLANST
223: EXTERNAL LSAME, ILAENV, DLAMCH, DLANST
224: * ..
225: * .. External Subroutines ..
226: EXTERNAL DCOPY, DSCAL, DSTEBZ, DSTEMR, DSTEIN, DSTERF,
227: $ DSWAP, XERBLA
228: * ..
229: * .. Intrinsic Functions ..
230: INTRINSIC MAX, MIN, SQRT
231: * ..
232: * .. Executable Statements ..
233: *
234: *
235: * Test the input parameters.
236: *
237: IEEEOK = ILAENV( 10, 'DSTEVR', 'N', 1, 2, 3, 4 )
238: *
239: WANTZ = LSAME( JOBZ, 'V' )
240: ALLEIG = LSAME( RANGE, 'A' )
241: VALEIG = LSAME( RANGE, 'V' )
242: INDEIG = LSAME( RANGE, 'I' )
243: *
244: LQUERY = ( ( LWORK.EQ.-1 ) .OR. ( LIWORK.EQ.-1 ) )
245: LWMIN = MAX( 1, 20*N )
246: LIWMIN = MAX( 1, 10*N )
247: *
248: *
249: INFO = 0
250: IF( .NOT.( WANTZ .OR. LSAME( JOBZ, 'N' ) ) ) THEN
251: INFO = -1
252: ELSE IF( .NOT.( ALLEIG .OR. VALEIG .OR. INDEIG ) ) THEN
253: INFO = -2
254: ELSE IF( N.LT.0 ) THEN
255: INFO = -3
256: ELSE
257: IF( VALEIG ) THEN
258: IF( N.GT.0 .AND. VU.LE.VL )
259: $ INFO = -7
260: ELSE IF( INDEIG ) THEN
261: IF( IL.LT.1 .OR. IL.GT.MAX( 1, N ) ) THEN
262: INFO = -8
263: ELSE IF( IU.LT.MIN( N, IL ) .OR. IU.GT.N ) THEN
264: INFO = -9
265: END IF
266: END IF
267: END IF
268: IF( INFO.EQ.0 ) THEN
269: IF( LDZ.LT.1 .OR. ( WANTZ .AND. LDZ.LT.N ) ) THEN
270: INFO = -14
271: END IF
272: END IF
273: *
274: IF( INFO.EQ.0 ) THEN
275: WORK( 1 ) = LWMIN
276: IWORK( 1 ) = LIWMIN
277: *
278: IF( LWORK.LT.LWMIN .AND. .NOT.LQUERY ) THEN
279: INFO = -17
280: ELSE IF( LIWORK.LT.LIWMIN .AND. .NOT.LQUERY ) THEN
281: INFO = -19
282: END IF
283: END IF
284: *
285: IF( INFO.NE.0 ) THEN
286: CALL XERBLA( 'DSTEVR', -INFO )
287: RETURN
288: ELSE IF( LQUERY ) THEN
289: RETURN
290: END IF
291: *
292: * Quick return if possible
293: *
294: M = 0
295: IF( N.EQ.0 )
296: $ RETURN
297: *
298: IF( N.EQ.1 ) THEN
299: IF( ALLEIG .OR. INDEIG ) THEN
300: M = 1
301: W( 1 ) = D( 1 )
302: ELSE
303: IF( VL.LT.D( 1 ) .AND. VU.GE.D( 1 ) ) THEN
304: M = 1
305: W( 1 ) = D( 1 )
306: END IF
307: END IF
308: IF( WANTZ )
309: $ Z( 1, 1 ) = ONE
310: RETURN
311: END IF
312: *
313: * Get machine constants.
314: *
315: SAFMIN = DLAMCH( 'Safe minimum' )
316: EPS = DLAMCH( 'Precision' )
317: SMLNUM = SAFMIN / EPS
318: BIGNUM = ONE / SMLNUM
319: RMIN = SQRT( SMLNUM )
320: RMAX = MIN( SQRT( BIGNUM ), ONE / SQRT( SQRT( SAFMIN ) ) )
321: *
322: *
323: * Scale matrix to allowable range, if necessary.
324: *
325: ISCALE = 0
326: VLL = VL
327: VUU = VU
328: *
329: TNRM = DLANST( 'M', N, D, E )
330: IF( TNRM.GT.ZERO .AND. TNRM.LT.RMIN ) THEN
331: ISCALE = 1
332: SIGMA = RMIN / TNRM
333: ELSE IF( TNRM.GT.RMAX ) THEN
334: ISCALE = 1
335: SIGMA = RMAX / TNRM
336: END IF
337: IF( ISCALE.EQ.1 ) THEN
338: CALL DSCAL( N, SIGMA, D, 1 )
339: CALL DSCAL( N-1, SIGMA, E( 1 ), 1 )
340: IF( VALEIG ) THEN
341: VLL = VL*SIGMA
342: VUU = VU*SIGMA
343: END IF
344: END IF
345:
346: * Initialize indices into workspaces. Note: These indices are used only
347: * if DSTERF or DSTEMR fail.
348:
349: * IWORK(INDIBL:INDIBL+M-1) corresponds to IBLOCK in DSTEBZ and
350: * stores the block indices of each of the M<=N eigenvalues.
351: INDIBL = 1
352: * IWORK(INDISP:INDISP+NSPLIT-1) corresponds to ISPLIT in DSTEBZ and
353: * stores the starting and finishing indices of each block.
354: INDISP = INDIBL + N
355: * IWORK(INDIFL:INDIFL+N-1) stores the indices of eigenvectors
356: * that corresponding to eigenvectors that fail to converge in
357: * DSTEIN. This information is discarded; if any fail, the driver
358: * returns INFO > 0.
359: INDIFL = INDISP + N
360: * INDIWO is the offset of the remaining integer workspace.
361: INDIWO = INDISP + N
362: *
363: * If all eigenvalues are desired, then
364: * call DSTERF or DSTEMR. If this fails for some eigenvalue, then
365: * try DSTEBZ.
366: *
367: *
368: TEST = .FALSE.
369: IF( INDEIG ) THEN
370: IF( IL.EQ.1 .AND. IU.EQ.N ) THEN
371: TEST = .TRUE.
372: END IF
373: END IF
374: IF( ( ALLEIG .OR. TEST ) .AND. IEEEOK.EQ.1 ) THEN
375: CALL DCOPY( N-1, E( 1 ), 1, WORK( 1 ), 1 )
376: IF( .NOT.WANTZ ) THEN
377: CALL DCOPY( N, D, 1, W, 1 )
378: CALL DSTERF( N, W, WORK, INFO )
379: ELSE
380: CALL DCOPY( N, D, 1, WORK( N+1 ), 1 )
381: IF (ABSTOL .LE. TWO*N*EPS) THEN
382: TRYRAC = .TRUE.
383: ELSE
384: TRYRAC = .FALSE.
385: END IF
386: CALL DSTEMR( JOBZ, 'A', N, WORK( N+1 ), WORK, VL, VU, IL,
387: $ IU, M, W, Z, LDZ, N, ISUPPZ, TRYRAC,
388: $ WORK( 2*N+1 ), LWORK-2*N, IWORK, LIWORK, INFO )
389: *
390: END IF
391: IF( INFO.EQ.0 ) THEN
392: M = N
393: GO TO 10
394: END IF
395: INFO = 0
396: END IF
397: *
398: * Otherwise, call DSTEBZ and, if eigenvectors are desired, DSTEIN.
399: *
400: IF( WANTZ ) THEN
401: ORDER = 'B'
402: ELSE
403: ORDER = 'E'
404: END IF
405:
406: CALL DSTEBZ( RANGE, ORDER, N, VLL, VUU, IL, IU, ABSTOL, D, E, M,
407: $ NSPLIT, W, IWORK( INDIBL ), IWORK( INDISP ), WORK,
408: $ IWORK( INDIWO ), INFO )
409: *
410: IF( WANTZ ) THEN
411: CALL DSTEIN( N, D, E, M, W, IWORK( INDIBL ), IWORK( INDISP ),
412: $ Z, LDZ, WORK, IWORK( INDIWO ), IWORK( INDIFL ),
413: $ INFO )
414: END IF
415: *
416: * If matrix was scaled, then rescale eigenvalues appropriately.
417: *
418: 10 CONTINUE
419: IF( ISCALE.EQ.1 ) THEN
420: IF( INFO.EQ.0 ) THEN
421: IMAX = M
422: ELSE
423: IMAX = INFO - 1
424: END IF
425: CALL DSCAL( IMAX, ONE / SIGMA, W, 1 )
426: END IF
427: *
428: * If eigenvalues are not in order, then sort them, along with
429: * eigenvectors.
430: *
431: IF( WANTZ ) THEN
432: DO 30 J = 1, M - 1
433: I = 0
434: TMP1 = W( J )
435: DO 20 JJ = J + 1, M
436: IF( W( JJ ).LT.TMP1 ) THEN
437: I = JJ
438: TMP1 = W( JJ )
439: END IF
440: 20 CONTINUE
441: *
442: IF( I.NE.0 ) THEN
443: ITMP1 = IWORK( I )
444: W( I ) = W( J )
445: IWORK( I ) = IWORK( J )
446: W( J ) = TMP1
447: IWORK( J ) = ITMP1
448: CALL DSWAP( N, Z( 1, I ), 1, Z( 1, J ), 1 )
449: END IF
450: 30 CONTINUE
451: END IF
452: *
453: * Causes problems with tests 19 & 20:
454: * IF (wantz .and. INDEIG ) Z( 1,1) = Z(1,1) / 1.002 + .002
455: *
456: *
457: WORK( 1 ) = LWMIN
458: IWORK( 1 ) = LIWMIN
459: RETURN
460: *
461: * End of DSTEVR
462: *
463: END
CVSweb interface <joel.bertrand@systella.fr>