Annotation of rpl/lapack/lapack/dgejsv.f, revision 1.1
1.1 ! bertrand 1: SUBROUTINE DGEJSV( JOBA, JOBU, JOBV, JOBR, JOBT, JOBP,
! 2: & M, N, A, LDA, SVA, U, LDU, V, LDV,
! 3: & WORK, LWORK, IWORK, INFO )
! 4: *
! 5: * -- LAPACK routine (version 3.2.2) --
! 6: *
! 7: * -- Contributed by Zlatko Drmac of the University of Zagreb and --
! 8: * -- Kresimir Veselic of the Fernuniversitaet Hagen --
! 9: * -- June 2010 --
! 10: *
! 11: * -- LAPACK is a software package provided by Univ. of Tennessee, --
! 12: * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
! 13: *
! 14: * This routine is also part of SIGMA (version 1.23, October 23. 2008.)
! 15: * SIGMA is a library of algorithms for highly accurate algorithms for
! 16: * computation of SVD, PSVD, QSVD, (H,K)-SVD, and for solution of the
! 17: * eigenvalue problems Hx = lambda M x, H M x = lambda x with H, M > 0.
! 18: *
! 19: * .. Scalar Arguments ..
! 20: IMPLICIT NONE
! 21: INTEGER INFO, LDA, LDU, LDV, LWORK, M, N
! 22: * ..
! 23: * .. Array Arguments ..
! 24: DOUBLE PRECISION A( LDA, * ), SVA( N ), U( LDU, * ), V( LDV, * ),
! 25: & WORK( LWORK )
! 26: INTEGER IWORK( * )
! 27: CHARACTER*1 JOBA, JOBP, JOBR, JOBT, JOBU, JOBV
! 28: * ..
! 29: *
! 30: * Purpose
! 31: * =======
! 32: *
! 33: * DGEJSV computes the singular value decomposition (SVD) of a real M-by-N
! 34: * matrix [A], where M >= N. The SVD of [A] is written as
! 35: *
! 36: * [A] = [U] * [SIGMA] * [V]^t,
! 37: *
! 38: * where [SIGMA] is an N-by-N (M-by-N) matrix which is zero except for its N
! 39: * diagonal elements, [U] is an M-by-N (or M-by-M) orthonormal matrix, and
! 40: * [V] is an N-by-N orthogonal matrix. The diagonal elements of [SIGMA] are
! 41: * the singular values of [A]. The columns of [U] and [V] are the left and
! 42: * the right singular vectors of [A], respectively. The matrices [U] and [V]
! 43: * are computed and stored in the arrays U and V, respectively. The diagonal
! 44: * of [SIGMA] is computed and stored in the array SVA.
! 45: *
! 46: * Arguments
! 47: * =========
! 48: *
! 49: * JOBA (input) CHARACTER*1
! 50: * Specifies the level of accuracy:
! 51: * = 'C': This option works well (high relative accuracy) if A = B * D,
! 52: * with well-conditioned B and arbitrary diagonal matrix D.
! 53: * The accuracy cannot be spoiled by COLUMN scaling. The
! 54: * accuracy of the computed output depends on the condition of
! 55: * B, and the procedure aims at the best theoretical accuracy.
! 56: * The relative error max_{i=1:N}|d sigma_i| / sigma_i is
! 57: * bounded by f(M,N)*epsilon* cond(B), independent of D.
! 58: * The input matrix is preprocessed with the QRF with column
! 59: * pivoting. This initial preprocessing and preconditioning by
! 60: * a rank revealing QR factorization is common for all values of
! 61: * JOBA. Additional actions are specified as follows:
! 62: * = 'E': Computation as with 'C' with an additional estimate of the
! 63: * condition number of B. It provides a realistic error bound.
! 64: * = 'F': If A = D1 * C * D2 with ill-conditioned diagonal scalings
! 65: * D1, D2, and well-conditioned matrix C, this option gives
! 66: * higher accuracy than the 'C' option. If the structure of the
! 67: * input matrix is not known, and relative accuracy is
! 68: * desirable, then this option is advisable. The input matrix A
! 69: * is preprocessed with QR factorization with FULL (row and
! 70: * column) pivoting.
! 71: * = 'G' Computation as with 'F' with an additional estimate of the
! 72: * condition number of B, where A=D*B. If A has heavily weighted
! 73: * rows, then using this condition number gives too pessimistic
! 74: * error bound.
! 75: * = 'A': Small singular values are the noise and the matrix is treated
! 76: * as numerically rank defficient. The error in the computed
! 77: * singular values is bounded by f(m,n)*epsilon*||A||.
! 78: * The computed SVD A = U * S * V^t restores A up to
! 79: * f(m,n)*epsilon*||A||.
! 80: * This gives the procedure the licence to discard (set to zero)
! 81: * all singular values below N*epsilon*||A||.
! 82: * = 'R': Similar as in 'A'. Rank revealing property of the initial
! 83: * QR factorization is used do reveal (using triangular factor)
! 84: * a gap sigma_{r+1} < epsilon * sigma_r in which case the
! 85: * numerical RANK is declared to be r. The SVD is computed with
! 86: * absolute error bounds, but more accurately than with 'A'.
! 87: *
! 88: * JOBU (input) CHARACTER*1
! 89: * Specifies whether to compute the columns of U:
! 90: * = 'U': N columns of U are returned in the array U.
! 91: * = 'F': full set of M left sing. vectors is returned in the array U.
! 92: * = 'W': U may be used as workspace of length M*N. See the description
! 93: * of U.
! 94: * = 'N': U is not computed.
! 95: *
! 96: * JOBV (input) CHARACTER*1
! 97: * Specifies whether to compute the matrix V:
! 98: * = 'V': N columns of V are returned in the array V; Jacobi rotations
! 99: * are not explicitly accumulated.
! 100: * = 'J': N columns of V are returned in the array V, but they are
! 101: * computed as the product of Jacobi rotations. This option is
! 102: * allowed only if JOBU .NE. 'N', i.e. in computing the full SVD.
! 103: * = 'W': V may be used as workspace of length N*N. See the description
! 104: * of V.
! 105: * = 'N': V is not computed.
! 106: *
! 107: * JOBR (input) CHARACTER*1
! 108: * Specifies the RANGE for the singular values. Issues the licence to
! 109: * set to zero small positive singular values if they are outside
! 110: * specified range. If A .NE. 0 is scaled so that the largest singular
! 111: * value of c*A is around DSQRT(BIG), BIG=SLAMCH('O'), then JOBR issues
! 112: * the licence to kill columns of A whose norm in c*A is less than
! 113: * DSQRT(SFMIN) (for JOBR.EQ.'R'), or less than SMALL=SFMIN/EPSLN,
! 114: * where SFMIN=SLAMCH('S'), EPSLN=SLAMCH('E').
! 115: * = 'N': Do not kill small columns of c*A. This option assumes that
! 116: * BLAS and QR factorizations and triangular solvers are
! 117: * implemented to work in that range. If the condition of A
! 118: * is greater than BIG, use DGESVJ.
! 119: * = 'R': RESTRICTED range for sigma(c*A) is [DSQRT(SFMIN), DSQRT(BIG)]
! 120: * (roughly, as described above). This option is recommended.
! 121: * ~~~~~~~~~~~~~~~~~~~~~~~~~~~
! 122: * For computing the singular values in the FULL range [SFMIN,BIG]
! 123: * use DGESVJ.
! 124: *
! 125: * JOBT (input) CHARACTER*1
! 126: * If the matrix is square then the procedure may determine to use
! 127: * transposed A if A^t seems to be better with respect to convergence.
! 128: * If the matrix is not square, JOBT is ignored. This is subject to
! 129: * changes in the future.
! 130: * The decision is based on two values of entropy over the adjoint
! 131: * orbit of A^t * A. See the descriptions of WORK(6) and WORK(7).
! 132: * = 'T': transpose if entropy test indicates possibly faster
! 133: * convergence of Jacobi process if A^t is taken as input. If A is
! 134: * replaced with A^t, then the row pivoting is included automatically.
! 135: * = 'N': do not speculate.
! 136: * This option can be used to compute only the singular values, or the
! 137: * full SVD (U, SIGMA and V). For only one set of singular vectors
! 138: * (U or V), the caller should provide both U and V, as one of the
! 139: * matrices is used as workspace if the matrix A is transposed.
! 140: * The implementer can easily remove this constraint and make the
! 141: * code more complicated. See the descriptions of U and V.
! 142: *
! 143: * JOBP (input) CHARACTER*1
! 144: * Issues the licence to introduce structured perturbations to drown
! 145: * denormalized numbers. This licence should be active if the
! 146: * denormals are poorly implemented, causing slow computation,
! 147: * especially in cases of fast convergence (!). For details see [1,2].
! 148: * For the sake of simplicity, this perturbations are included only
! 149: * when the full SVD or only the singular values are requested. The
! 150: * implementer/user can easily add the perturbation for the cases of
! 151: * computing one set of singular vectors.
! 152: * = 'P': introduce perturbation
! 153: * = 'N': do not perturb
! 154: *
! 155: * M (input) INTEGER
! 156: * The number of rows of the input matrix A. M >= 0.
! 157: *
! 158: * N (input) INTEGER
! 159: * The number of columns of the input matrix A. M >= N >= 0.
! 160: *
! 161: * A (input/workspace) DOUBLE PRECISION array, dimension (LDA,N)
! 162: * On entry, the M-by-N matrix A.
! 163: *
! 164: * LDA (input) INTEGER
! 165: * The leading dimension of the array A. LDA >= max(1,M).
! 166: *
! 167: * SVA (workspace/output) DOUBLE PRECISION array, dimension (N)
! 168: * On exit,
! 169: * - For WORK(1)/WORK(2) = ONE: The singular values of A. During the
! 170: * computation SVA contains Euclidean column norms of the
! 171: * iterated matrices in the array A.
! 172: * - For WORK(1) .NE. WORK(2): The singular values of A are
! 173: * (WORK(1)/WORK(2)) * SVA(1:N). This factored form is used if
! 174: * sigma_max(A) overflows or if small singular values have been
! 175: * saved from underflow by scaling the input matrix A.
! 176: * - If JOBR='R' then some of the singular values may be returned
! 177: * as exact zeros obtained by "set to zero" because they are
! 178: * below the numerical rank threshold or are denormalized numbers.
! 179: *
! 180: * U (workspace/output) DOUBLE PRECISION array, dimension ( LDU, N )
! 181: * If JOBU = 'U', then U contains on exit the M-by-N matrix of
! 182: * the left singular vectors.
! 183: * If JOBU = 'F', then U contains on exit the M-by-M matrix of
! 184: * the left singular vectors, including an ONB
! 185: * of the orthogonal complement of the Range(A).
! 186: * If JOBU = 'W' .AND. (JOBV.EQ.'V' .AND. JOBT.EQ.'T' .AND. M.EQ.N),
! 187: * then U is used as workspace if the procedure
! 188: * replaces A with A^t. In that case, [V] is computed
! 189: * in U as left singular vectors of A^t and then
! 190: * copied back to the V array. This 'W' option is just
! 191: * a reminder to the caller that in this case U is
! 192: * reserved as workspace of length N*N.
! 193: * If JOBU = 'N' U is not referenced.
! 194: *
! 195: * LDU (input) INTEGER
! 196: * The leading dimension of the array U, LDU >= 1.
! 197: * IF JOBU = 'U' or 'F' or 'W', then LDU >= M.
! 198: *
! 199: * V (workspace/output) DOUBLE PRECISION array, dimension ( LDV, N )
! 200: * If JOBV = 'V', 'J' then V contains on exit the N-by-N matrix of
! 201: * the right singular vectors;
! 202: * If JOBV = 'W', AND (JOBU.EQ.'U' AND JOBT.EQ.'T' AND M.EQ.N),
! 203: * then V is used as workspace if the pprocedure
! 204: * replaces A with A^t. In that case, [U] is computed
! 205: * in V as right singular vectors of A^t and then
! 206: * copied back to the U array. This 'W' option is just
! 207: * a reminder to the caller that in this case V is
! 208: * reserved as workspace of length N*N.
! 209: * If JOBV = 'N' V is not referenced.
! 210: *
! 211: * LDV (input) INTEGER
! 212: * The leading dimension of the array V, LDV >= 1.
! 213: * If JOBV = 'V' or 'J' or 'W', then LDV >= N.
! 214: *
! 215: * WORK (workspace/output) DOUBLE PRECISION array, dimension at least LWORK.
! 216: * On exit,
! 217: * WORK(1) = SCALE = WORK(2) / WORK(1) is the scaling factor such
! 218: * that SCALE*SVA(1:N) are the computed singular values
! 219: * of A. (See the description of SVA().)
! 220: * WORK(2) = See the description of WORK(1).
! 221: * WORK(3) = SCONDA is an estimate for the condition number of
! 222: * column equilibrated A. (If JOBA .EQ. 'E' or 'G')
! 223: * SCONDA is an estimate of DSQRT(||(R^t * R)^(-1)||_1).
! 224: * It is computed using DPOCON. It holds
! 225: * N^(-1/4) * SCONDA <= ||R^(-1)||_2 <= N^(1/4) * SCONDA
! 226: * where R is the triangular factor from the QRF of A.
! 227: * However, if R is truncated and the numerical rank is
! 228: * determined to be strictly smaller than N, SCONDA is
! 229: * returned as -1, thus indicating that the smallest
! 230: * singular values might be lost.
! 231: *
! 232: * If full SVD is needed, the following two condition numbers are
! 233: * useful for the analysis of the algorithm. They are provied for
! 234: * a developer/implementer who is familiar with the details of
! 235: * the method.
! 236: *
! 237: * WORK(4) = an estimate of the scaled condition number of the
! 238: * triangular factor in the first QR factorization.
! 239: * WORK(5) = an estimate of the scaled condition number of the
! 240: * triangular factor in the second QR factorization.
! 241: * The following two parameters are computed if JOBT .EQ. 'T'.
! 242: * They are provided for a developer/implementer who is familiar
! 243: * with the details of the method.
! 244: *
! 245: * WORK(6) = the entropy of A^t*A :: this is the Shannon entropy
! 246: * of diag(A^t*A) / Trace(A^t*A) taken as point in the
! 247: * probability simplex.
! 248: * WORK(7) = the entropy of A*A^t.
! 249: *
! 250: * LWORK (input) INTEGER
! 251: * Length of WORK to confirm proper allocation of work space.
! 252: * LWORK depends on the job:
! 253: *
! 254: * If only SIGMA is needed ( JOBU.EQ.'N', JOBV.EQ.'N' ) and
! 255: * -> .. no scaled condition estimate required ( JOBE.EQ.'N'):
! 256: * LWORK >= max(2*M+N,4*N+1,7). This is the minimal requirement.
! 257: * For optimal performance (blocked code) the optimal value
! 258: * is LWORK >= max(2*M+N,3*N+(N+1)*NB,7). Here NB is the optimal
! 259: * block size for xGEQP3/xGEQRF.
! 260: * -> .. an estimate of the scaled condition number of A is
! 261: * required (JOBA='E', 'G'). In this case, LWORK is the maximum
! 262: * of the above and N*N+4*N, i.e. LWORK >= max(2*M+N,N*N+4N,7).
! 263: *
! 264: * If SIGMA and the right singular vectors are needed (JOBV.EQ.'V'),
! 265: * -> the minimal requirement is LWORK >= max(2*N+M,7).
! 266: * -> For optimal performance, LWORK >= max(2*N+M,2*N+N*NB,7),
! 267: * where NB is the optimal block size.
! 268: *
! 269: * If SIGMA and the left singular vectors are needed
! 270: * -> the minimal requirement is LWORK >= max(2*N+M,7).
! 271: * -> For optimal performance, LWORK >= max(2*N+M,2*N+N*NB,7),
! 272: * where NB is the optimal block size.
! 273: *
! 274: * If full SVD is needed ( JOBU.EQ.'U' or 'F', JOBV.EQ.'V' ) and
! 275: * -> .. the singular vectors are computed without explicit
! 276: * accumulation of the Jacobi rotations, LWORK >= 6*N+2*N*N
! 277: * -> .. in the iterative part, the Jacobi rotations are
! 278: * explicitly accumulated (option, see the description of JOBV),
! 279: * then the minimal requirement is LWORK >= max(M+3*N+N*N,7).
! 280: * For better performance, if NB is the optimal block size,
! 281: * LWORK >= max(3*N+N*N+M,3*N+N*N+N*NB,7).
! 282: *
! 283: * IWORK (workspace/output) INTEGER array, dimension M+3*N.
! 284: * On exit,
! 285: * IWORK(1) = the numerical rank determined after the initial
! 286: * QR factorization with pivoting. See the descriptions
! 287: * of JOBA and JOBR.
! 288: * IWORK(2) = the number of the computed nonzero singular values
! 289: * IWORK(3) = if nonzero, a warning message:
! 290: * If IWORK(3).EQ.1 then some of the column norms of A
! 291: * were denormalized floats. The requested high accuracy
! 292: * is not warranted by the data.
! 293: *
! 294: * INFO (output) INTEGER
! 295: * < 0 : if INFO = -i, then the i-th argument had an illegal value.
! 296: * = 0 : successfull exit;
! 297: * > 0 : DGEJSV did not converge in the maximal allowed number
! 298: * of sweeps. The computed values may be inaccurate.
! 299: *
! 300: * Further Details
! 301: * ===============
! 302: *
! 303: * DGEJSV implements a preconditioned Jacobi SVD algorithm. It uses SGEQP3,
! 304: * SGEQRF, and SGELQF as preprocessors and preconditioners. Optionally, an
! 305: * additional row pivoting can be used as a preprocessor, which in some
! 306: * cases results in much higher accuracy. An example is matrix A with the
! 307: * structure A = D1 * C * D2, where D1, D2 are arbitrarily ill-conditioned
! 308: * diagonal matrices and C is well-conditioned matrix. In that case, complete
! 309: * pivoting in the first QR factorizations provides accuracy dependent on the
! 310: * condition number of C, and independent of D1, D2. Such higher accuracy is
! 311: * not completely understood theoretically, but it works well in practice.
! 312: * Further, if A can be written as A = B*D, with well-conditioned B and some
! 313: * diagonal D, then the high accuracy is guaranteed, both theoretically and
! 314: * in software, independent of D. For more details see [1], [2].
! 315: * The computational range for the singular values can be the full range
! 316: * ( UNDERFLOW,OVERFLOW ), provided that the machine arithmetic and the BLAS
! 317: * & LAPACK routines called by DGEJSV are implemented to work in that range.
! 318: * If that is not the case, then the restriction for safe computation with
! 319: * the singular values in the range of normalized IEEE numbers is that the
! 320: * spectral condition number kappa(A)=sigma_max(A)/sigma_min(A) does not
! 321: * overflow. This code (DGEJSV) is best used in this restricted range,
! 322: * meaning that singular values of magnitude below ||A||_2 / SLAMCH('O') are
! 323: * returned as zeros. See JOBR for details on this.
! 324: * Further, this implementation is somewhat slower than the one described
! 325: * in [1,2] due to replacement of some non-LAPACK components, and because
! 326: * the choice of some tuning parameters in the iterative part (DGESVJ) is
! 327: * left to the implementer on a particular machine.
! 328: * The rank revealing QR factorization (in this code: SGEQP3) should be
! 329: * implemented as in [3]. We have a new version of SGEQP3 under development
! 330: * that is more robust than the current one in LAPACK, with a cleaner cut in
! 331: * rank defficient cases. It will be available in the SIGMA library [4].
! 332: * If M is much larger than N, it is obvious that the inital QRF with
! 333: * column pivoting can be preprocessed by the QRF without pivoting. That
! 334: * well known trick is not used in DGEJSV because in some cases heavy row
! 335: * weighting can be treated with complete pivoting. The overhead in cases
! 336: * M much larger than N is then only due to pivoting, but the benefits in
! 337: * terms of accuracy have prevailed. The implementer/user can incorporate
! 338: * this extra QRF step easily. The implementer can also improve data movement
! 339: * (matrix transpose, matrix copy, matrix transposed copy) - this
! 340: * implementation of DGEJSV uses only the simplest, naive data movement.
! 341: *
! 342: * Contributors
! 343: *
! 344: * Zlatko Drmac (Zagreb, Croatia) and Kresimir Veselic (Hagen, Germany)
! 345: *
! 346: * References
! 347: *
! 348: * [1] Z. Drmac and K. Veselic: New fast and accurate Jacobi SVD algorithm I.
! 349: * SIAM J. Matrix Anal. Appl. Vol. 35, No. 2 (2008), pp. 1322-1342.
! 350: * LAPACK Working note 169.
! 351: * [2] Z. Drmac and K. Veselic: New fast and accurate Jacobi SVD algorithm II.
! 352: * SIAM J. Matrix Anal. Appl. Vol. 35, No. 2 (2008), pp. 1343-1362.
! 353: * LAPACK Working note 170.
! 354: * [3] Z. Drmac and Z. Bujanovic: On the failure of rank-revealing QR
! 355: * factorization software - a case study.
! 356: * ACM Trans. Math. Softw. Vol. 35, No 2 (2008), pp. 1-28.
! 357: * LAPACK Working note 176.
! 358: * [4] Z. Drmac: SIGMA - mathematical software library for accurate SVD, PSV,
! 359: * QSVD, (H,K)-SVD computations.
! 360: * Department of Mathematics, University of Zagreb, 2008.
! 361: *
! 362: * Bugs, examples and comments
! 363: *
! 364: * Please report all bugs and send interesting examples and/or comments to
! 365: * drmac@math.hr. Thank you.
! 366: *
! 367: * ==========================================================================
! 368: *
! 369: * .. Local Parameters ..
! 370: DOUBLE PRECISION ZERO, ONE
! 371: PARAMETER ( ZERO = 0.0D0, ONE = 1.0D0 )
! 372: * ..
! 373: * .. Local Scalars ..
! 374: DOUBLE PRECISION AAPP, AAQQ, AATMAX, AATMIN, BIG, BIG1, COND_OK,
! 375: & CONDR1, CONDR2, ENTRA, ENTRAT, EPSLN, MAXPRJ, SCALEM,
! 376: & SCONDA, SFMIN, SMALL, TEMP1, USCAL1, USCAL2, XSC
! 377: INTEGER IERR, N1, NR, NUMRANK, p, q, WARNING
! 378: LOGICAL ALMORT, DEFR, ERREST, GOSCAL, JRACC, KILL, LSVEC,
! 379: & L2ABER, L2KILL, L2PERT, L2RANK, L2TRAN,
! 380: & NOSCAL, ROWPIV, RSVEC, TRANSP
! 381: * ..
! 382: * .. Intrinsic Functions ..
! 383: INTRINSIC DABS, DLOG, DMAX1, DMIN1, DBLE,
! 384: & MAX0, MIN0, IDNINT, DSIGN, DSQRT
! 385: * ..
! 386: * .. External Functions ..
! 387: DOUBLE PRECISION DLAMCH, DNRM2
! 388: INTEGER IDAMAX
! 389: LOGICAL LSAME
! 390: EXTERNAL IDAMAX, LSAME, DLAMCH, DNRM2
! 391: * ..
! 392: * .. External Subroutines ..
! 393: EXTERNAL DCOPY, DGELQF, DGEQP3, DGEQRF, DLACPY, DLASCL,
! 394: & DLASET, DLASSQ, DLASWP, DORGQR, DORMLQ,
! 395: & DORMQR, DPOCON, DSCAL, DSWAP, DTRSM, XERBLA
! 396: *
! 397: EXTERNAL DGESVJ
! 398: * ..
! 399: *
! 400: * Test the input arguments
! 401: *
! 402: LSVEC = LSAME( JOBU, 'U' ) .OR. LSAME( JOBU, 'F' )
! 403: JRACC = LSAME( JOBV, 'J' )
! 404: RSVEC = LSAME( JOBV, 'V' ) .OR. JRACC
! 405: ROWPIV = LSAME( JOBA, 'F' ) .OR. LSAME( JOBA, 'G' )
! 406: L2RANK = LSAME( JOBA, 'R' )
! 407: L2ABER = LSAME( JOBA, 'A' )
! 408: ERREST = LSAME( JOBA, 'E' ) .OR. LSAME( JOBA, 'G' )
! 409: L2TRAN = LSAME( JOBT, 'T' )
! 410: L2KILL = LSAME( JOBR, 'R' )
! 411: DEFR = LSAME( JOBR, 'N' )
! 412: L2PERT = LSAME( JOBP, 'P' )
! 413: *
! 414: IF ( .NOT.(ROWPIV .OR. L2RANK .OR. L2ABER .OR.
! 415: & ERREST .OR. LSAME( JOBA, 'C' ) )) THEN
! 416: INFO = - 1
! 417: ELSE IF ( .NOT.( LSVEC .OR. LSAME( JOBU, 'N' ) .OR.
! 418: & LSAME( JOBU, 'W' )) ) THEN
! 419: INFO = - 2
! 420: ELSE IF ( .NOT.( RSVEC .OR. LSAME( JOBV, 'N' ) .OR.
! 421: & LSAME( JOBV, 'W' )) .OR. ( JRACC .AND. (.NOT.LSVEC) ) ) THEN
! 422: INFO = - 3
! 423: ELSE IF ( .NOT. ( L2KILL .OR. DEFR ) ) THEN
! 424: INFO = - 4
! 425: ELSE IF ( .NOT. ( L2TRAN .OR. LSAME( JOBT, 'N' ) ) ) THEN
! 426: INFO = - 5
! 427: ELSE IF ( .NOT. ( L2PERT .OR. LSAME( JOBP, 'N' ) ) ) THEN
! 428: INFO = - 6
! 429: ELSE IF ( M .LT. 0 ) THEN
! 430: INFO = - 7
! 431: ELSE IF ( ( N .LT. 0 ) .OR. ( N .GT. M ) ) THEN
! 432: INFO = - 8
! 433: ELSE IF ( LDA .LT. M ) THEN
! 434: INFO = - 10
! 435: ELSE IF ( LSVEC .AND. ( LDU .LT. M ) ) THEN
! 436: INFO = - 13
! 437: ELSE IF ( RSVEC .AND. ( LDV .LT. N ) ) THEN
! 438: INFO = - 14
! 439: ELSE IF ( (.NOT.(LSVEC .OR. RSVEC .OR. ERREST).AND.
! 440: & (LWORK .LT. MAX0(7,4*N+1,2*M+N))) .OR.
! 441: & (.NOT.(LSVEC .OR. LSVEC) .AND. ERREST .AND.
! 442: & (LWORK .LT. MAX0(7,4*N+N*N,2*M+N))) .OR.
! 443: & (LSVEC .AND. (.NOT.RSVEC) .AND. (LWORK .LT. MAX0(7,2*N+M))) .OR.
! 444: & (RSVEC .AND. (.NOT.LSVEC) .AND. (LWORK .LT. MAX0(7,2*N+M))) .OR.
! 445: & (LSVEC .AND. RSVEC .AND. .NOT.JRACC .AND. (LWORK.LT.6*N+2*N*N))
! 446: & .OR. (LSVEC.AND.RSVEC.AND.JRACC.AND.LWORK.LT.MAX0(7,M+3*N+N*N)))
! 447: & THEN
! 448: INFO = - 17
! 449: ELSE
! 450: * #:)
! 451: INFO = 0
! 452: END IF
! 453: *
! 454: IF ( INFO .NE. 0 ) THEN
! 455: * #:(
! 456: CALL XERBLA( 'DGEJSV', - INFO )
! 457: END IF
! 458: *
! 459: * Quick return for void matrix (Y3K safe)
! 460: * #:)
! 461: IF ( ( M .EQ. 0 ) .OR. ( N .EQ. 0 ) ) RETURN
! 462: *
! 463: * Determine whether the matrix U should be M x N or M x M
! 464: *
! 465: IF ( LSVEC ) THEN
! 466: N1 = N
! 467: IF ( LSAME( JOBU, 'F' ) ) N1 = M
! 468: END IF
! 469: *
! 470: * Set numerical parameters
! 471: *
! 472: *! NOTE: Make sure DLAMCH() does not fail on the target architecture.
! 473: *
! 474:
! 475: EPSLN = DLAMCH('Epsilon')
! 476: SFMIN = DLAMCH('SafeMinimum')
! 477: SMALL = SFMIN / EPSLN
! 478: BIG = DLAMCH('O')
! 479: * BIG = ONE / SFMIN
! 480: *
! 481: * Initialize SVA(1:N) = diag( ||A e_i||_2 )_1^N
! 482: *
! 483: *(!) If necessary, scale SVA() to protect the largest norm from
! 484: * overflow. It is possible that this scaling pushes the smallest
! 485: * column norm left from the underflow threshold (extreme case).
! 486: *
! 487: SCALEM = ONE / DSQRT(DBLE(M)*DBLE(N))
! 488: NOSCAL = .TRUE.
! 489: GOSCAL = .TRUE.
! 490: DO 1874 p = 1, N
! 491: AAPP = ZERO
! 492: AAQQ = ZERO
! 493: CALL DLASSQ( M, A(1,p), 1, AAPP, AAQQ )
! 494: IF ( AAPP .GT. BIG ) THEN
! 495: INFO = - 9
! 496: CALL XERBLA( 'DGEJSV', -INFO )
! 497: RETURN
! 498: END IF
! 499: AAQQ = DSQRT(AAQQ)
! 500: IF ( ( AAPP .LT. (BIG / AAQQ) ) .AND. NOSCAL ) THEN
! 501: SVA(p) = AAPP * AAQQ
! 502: ELSE
! 503: NOSCAL = .FALSE.
! 504: SVA(p) = AAPP * ( AAQQ * SCALEM )
! 505: IF ( GOSCAL ) THEN
! 506: GOSCAL = .FALSE.
! 507: CALL DSCAL( p-1, SCALEM, SVA, 1 )
! 508: END IF
! 509: END IF
! 510: 1874 CONTINUE
! 511: *
! 512: IF ( NOSCAL ) SCALEM = ONE
! 513: *
! 514: AAPP = ZERO
! 515: AAQQ = BIG
! 516: DO 4781 p = 1, N
! 517: AAPP = DMAX1( AAPP, SVA(p) )
! 518: IF ( SVA(p) .NE. ZERO ) AAQQ = DMIN1( AAQQ, SVA(p) )
! 519: 4781 CONTINUE
! 520: *
! 521: * Quick return for zero M x N matrix
! 522: * #:)
! 523: IF ( AAPP .EQ. ZERO ) THEN
! 524: IF ( LSVEC ) CALL DLASET( 'G', M, N1, ZERO, ONE, U, LDU )
! 525: IF ( RSVEC ) CALL DLASET( 'G', N, N, ZERO, ONE, V, LDV )
! 526: WORK(1) = ONE
! 527: WORK(2) = ONE
! 528: IF ( ERREST ) WORK(3) = ONE
! 529: IF ( LSVEC .AND. RSVEC ) THEN
! 530: WORK(4) = ONE
! 531: WORK(5) = ONE
! 532: END IF
! 533: IF ( L2TRAN ) THEN
! 534: WORK(6) = ZERO
! 535: WORK(7) = ZERO
! 536: END IF
! 537: IWORK(1) = 0
! 538: IWORK(2) = 0
! 539: RETURN
! 540: END IF
! 541: *
! 542: * Issue warning if denormalized column norms detected. Override the
! 543: * high relative accuracy request. Issue licence to kill columns
! 544: * (set them to zero) whose norm is less than sigma_max / BIG (roughly).
! 545: * #:(
! 546: WARNING = 0
! 547: IF ( AAQQ .LE. SFMIN ) THEN
! 548: L2RANK = .TRUE.
! 549: L2KILL = .TRUE.
! 550: WARNING = 1
! 551: END IF
! 552: *
! 553: * Quick return for one-column matrix
! 554: * #:)
! 555: IF ( N .EQ. 1 ) THEN
! 556: *
! 557: IF ( LSVEC ) THEN
! 558: CALL DLASCL( 'G',0,0,SVA(1),SCALEM, M,1,A(1,1),LDA,IERR )
! 559: CALL DLACPY( 'A', M, 1, A, LDA, U, LDU )
! 560: * computing all M left singular vectors of the M x 1 matrix
! 561: IF ( N1 .NE. N ) THEN
! 562: CALL DGEQRF( M, N, U,LDU, WORK, WORK(N+1),LWORK-N,IERR )
! 563: CALL DORGQR( M,N1,1, U,LDU,WORK,WORK(N+1),LWORK-N,IERR )
! 564: CALL DCOPY( M, A(1,1), 1, U(1,1), 1 )
! 565: END IF
! 566: END IF
! 567: IF ( RSVEC ) THEN
! 568: V(1,1) = ONE
! 569: END IF
! 570: IF ( SVA(1) .LT. (BIG*SCALEM) ) THEN
! 571: SVA(1) = SVA(1) / SCALEM
! 572: SCALEM = ONE
! 573: END IF
! 574: WORK(1) = ONE / SCALEM
! 575: WORK(2) = ONE
! 576: IF ( SVA(1) .NE. ZERO ) THEN
! 577: IWORK(1) = 1
! 578: IF ( ( SVA(1) / SCALEM) .GE. SFMIN ) THEN
! 579: IWORK(2) = 1
! 580: ELSE
! 581: IWORK(2) = 0
! 582: END IF
! 583: ELSE
! 584: IWORK(1) = 0
! 585: IWORK(2) = 0
! 586: END IF
! 587: IF ( ERREST ) WORK(3) = ONE
! 588: IF ( LSVEC .AND. RSVEC ) THEN
! 589: WORK(4) = ONE
! 590: WORK(5) = ONE
! 591: END IF
! 592: IF ( L2TRAN ) THEN
! 593: WORK(6) = ZERO
! 594: WORK(7) = ZERO
! 595: END IF
! 596: RETURN
! 597: *
! 598: END IF
! 599: *
! 600: TRANSP = .FALSE.
! 601: L2TRAN = L2TRAN .AND. ( M .EQ. N )
! 602: *
! 603: AATMAX = -ONE
! 604: AATMIN = BIG
! 605: IF ( ROWPIV .OR. L2TRAN ) THEN
! 606: *
! 607: * Compute the row norms, needed to determine row pivoting sequence
! 608: * (in the case of heavily row weighted A, row pivoting is strongly
! 609: * advised) and to collect information needed to compare the
! 610: * structures of A * A^t and A^t * A (in the case L2TRAN.EQ..TRUE.).
! 611: *
! 612: IF ( L2TRAN ) THEN
! 613: DO 1950 p = 1, M
! 614: XSC = ZERO
! 615: TEMP1 = ZERO
! 616: CALL DLASSQ( N, A(p,1), LDA, XSC, TEMP1 )
! 617: * DLASSQ gets both the ell_2 and the ell_infinity norm
! 618: * in one pass through the vector
! 619: WORK(M+N+p) = XSC * SCALEM
! 620: WORK(N+p) = XSC * (SCALEM*DSQRT(TEMP1))
! 621: AATMAX = DMAX1( AATMAX, WORK(N+p) )
! 622: IF (WORK(N+p) .NE. ZERO) AATMIN = DMIN1(AATMIN,WORK(N+p))
! 623: 1950 CONTINUE
! 624: ELSE
! 625: DO 1904 p = 1, M
! 626: WORK(M+N+p) = SCALEM*DABS( A(p,IDAMAX(N,A(p,1),LDA)) )
! 627: AATMAX = DMAX1( AATMAX, WORK(M+N+p) )
! 628: AATMIN = DMIN1( AATMIN, WORK(M+N+p) )
! 629: 1904 CONTINUE
! 630: END IF
! 631: *
! 632: END IF
! 633: *
! 634: * For square matrix A try to determine whether A^t would be better
! 635: * input for the preconditioned Jacobi SVD, with faster convergence.
! 636: * The decision is based on an O(N) function of the vector of column
! 637: * and row norms of A, based on the Shannon entropy. This should give
! 638: * the right choice in most cases when the difference actually matters.
! 639: * It may fail and pick the slower converging side.
! 640: *
! 641: ENTRA = ZERO
! 642: ENTRAT = ZERO
! 643: IF ( L2TRAN ) THEN
! 644: *
! 645: XSC = ZERO
! 646: TEMP1 = ZERO
! 647: CALL DLASSQ( N, SVA, 1, XSC, TEMP1 )
! 648: TEMP1 = ONE / TEMP1
! 649: *
! 650: ENTRA = ZERO
! 651: DO 1113 p = 1, N
! 652: BIG1 = ( ( SVA(p) / XSC )**2 ) * TEMP1
! 653: IF ( BIG1 .NE. ZERO ) ENTRA = ENTRA + BIG1 * DLOG(BIG1)
! 654: 1113 CONTINUE
! 655: ENTRA = - ENTRA / DLOG(DBLE(N))
! 656: *
! 657: * Now, SVA().^2/Trace(A^t * A) is a point in the probability simplex.
! 658: * It is derived from the diagonal of A^t * A. Do the same with the
! 659: * diagonal of A * A^t, compute the entropy of the corresponding
! 660: * probability distribution. Note that A * A^t and A^t * A have the
! 661: * same trace.
! 662: *
! 663: ENTRAT = ZERO
! 664: DO 1114 p = N+1, N+M
! 665: BIG1 = ( ( WORK(p) / XSC )**2 ) * TEMP1
! 666: IF ( BIG1 .NE. ZERO ) ENTRAT = ENTRAT + BIG1 * DLOG(BIG1)
! 667: 1114 CONTINUE
! 668: ENTRAT = - ENTRAT / DLOG(DBLE(M))
! 669: *
! 670: * Analyze the entropies and decide A or A^t. Smaller entropy
! 671: * usually means better input for the algorithm.
! 672: *
! 673: TRANSP = ( ENTRAT .LT. ENTRA )
! 674: *
! 675: * If A^t is better than A, transpose A.
! 676: *
! 677: IF ( TRANSP ) THEN
! 678: * In an optimal implementation, this trivial transpose
! 679: * should be replaced with faster transpose.
! 680: DO 1115 p = 1, N - 1
! 681: DO 1116 q = p + 1, N
! 682: TEMP1 = A(q,p)
! 683: A(q,p) = A(p,q)
! 684: A(p,q) = TEMP1
! 685: 1116 CONTINUE
! 686: 1115 CONTINUE
! 687: DO 1117 p = 1, N
! 688: WORK(M+N+p) = SVA(p)
! 689: SVA(p) = WORK(N+p)
! 690: 1117 CONTINUE
! 691: TEMP1 = AAPP
! 692: AAPP = AATMAX
! 693: AATMAX = TEMP1
! 694: TEMP1 = AAQQ
! 695: AAQQ = AATMIN
! 696: AATMIN = TEMP1
! 697: KILL = LSVEC
! 698: LSVEC = RSVEC
! 699: RSVEC = KILL
! 700: *
! 701: ROWPIV = .TRUE.
! 702: END IF
! 703: *
! 704: END IF
! 705: * END IF L2TRAN
! 706: *
! 707: * Scale the matrix so that its maximal singular value remains less
! 708: * than DSQRT(BIG) -- the matrix is scaled so that its maximal column
! 709: * has Euclidean norm equal to DSQRT(BIG/N). The only reason to keep
! 710: * DSQRT(BIG) instead of BIG is the fact that DGEJSV uses LAPACK and
! 711: * BLAS routines that, in some implementations, are not capable of
! 712: * working in the full interval [SFMIN,BIG] and that they may provoke
! 713: * overflows in the intermediate results. If the singular values spread
! 714: * from SFMIN to BIG, then DGESVJ will compute them. So, in that case,
! 715: * one should use DGESVJ instead of DGEJSV.
! 716: *
! 717: BIG1 = DSQRT( BIG )
! 718: TEMP1 = DSQRT( BIG / DBLE(N) )
! 719: *
! 720: CALL DLASCL( 'G', 0, 0, AAPP, TEMP1, N, 1, SVA, N, IERR )
! 721: IF ( AAQQ .GT. (AAPP * SFMIN) ) THEN
! 722: AAQQ = ( AAQQ / AAPP ) * TEMP1
! 723: ELSE
! 724: AAQQ = ( AAQQ * TEMP1 ) / AAPP
! 725: END IF
! 726: TEMP1 = TEMP1 * SCALEM
! 727: CALL DLASCL( 'G', 0, 0, AAPP, TEMP1, M, N, A, LDA, IERR )
! 728: *
! 729: * To undo scaling at the end of this procedure, multiply the
! 730: * computed singular values with USCAL2 / USCAL1.
! 731: *
! 732: USCAL1 = TEMP1
! 733: USCAL2 = AAPP
! 734: *
! 735: IF ( L2KILL ) THEN
! 736: * L2KILL enforces computation of nonzero singular values in
! 737: * the restricted range of condition number of the initial A,
! 738: * sigma_max(A) / sigma_min(A) approx. DSQRT(BIG)/DSQRT(SFMIN).
! 739: XSC = DSQRT( SFMIN )
! 740: ELSE
! 741: XSC = SMALL
! 742: *
! 743: * Now, if the condition number of A is too big,
! 744: * sigma_max(A) / sigma_min(A) .GT. DSQRT(BIG/N) * EPSLN / SFMIN,
! 745: * as a precaution measure, the full SVD is computed using DGESVJ
! 746: * with accumulated Jacobi rotations. This provides numerically
! 747: * more robust computation, at the cost of slightly increased run
! 748: * time. Depending on the concrete implementation of BLAS and LAPACK
! 749: * (i.e. how they behave in presence of extreme ill-conditioning) the
! 750: * implementor may decide to remove this switch.
! 751: IF ( ( AAQQ.LT.DSQRT(SFMIN) ) .AND. LSVEC .AND. RSVEC ) THEN
! 752: JRACC = .TRUE.
! 753: END IF
! 754: *
! 755: END IF
! 756: IF ( AAQQ .LT. XSC ) THEN
! 757: DO 700 p = 1, N
! 758: IF ( SVA(p) .LT. XSC ) THEN
! 759: CALL DLASET( 'A', M, 1, ZERO, ZERO, A(1,p), LDA )
! 760: SVA(p) = ZERO
! 761: END IF
! 762: 700 CONTINUE
! 763: END IF
! 764: *
! 765: * Preconditioning using QR factorization with pivoting
! 766: *
! 767: IF ( ROWPIV ) THEN
! 768: * Optional row permutation (Bjoerck row pivoting):
! 769: * A result by Cox and Higham shows that the Bjoerck's
! 770: * row pivoting combined with standard column pivoting
! 771: * has similar effect as Powell-Reid complete pivoting.
! 772: * The ell-infinity norms of A are made nonincreasing.
! 773: DO 1952 p = 1, M - 1
! 774: q = IDAMAX( M-p+1, WORK(M+N+p), 1 ) + p - 1
! 775: IWORK(2*N+p) = q
! 776: IF ( p .NE. q ) THEN
! 777: TEMP1 = WORK(M+N+p)
! 778: WORK(M+N+p) = WORK(M+N+q)
! 779: WORK(M+N+q) = TEMP1
! 780: END IF
! 781: 1952 CONTINUE
! 782: CALL DLASWP( N, A, LDA, 1, M-1, IWORK(2*N+1), 1 )
! 783: END IF
! 784: *
! 785: * End of the preparation phase (scaling, optional sorting and
! 786: * transposing, optional flushing of small columns).
! 787: *
! 788: * Preconditioning
! 789: *
! 790: * If the full SVD is needed, the right singular vectors are computed
! 791: * from a matrix equation, and for that we need theoretical analysis
! 792: * of the Businger-Golub pivoting. So we use DGEQP3 as the first RR QRF.
! 793: * In all other cases the first RR QRF can be chosen by other criteria
! 794: * (eg speed by replacing global with restricted window pivoting, such
! 795: * as in SGEQPX from TOMS # 782). Good results will be obtained using
! 796: * SGEQPX with properly (!) chosen numerical parameters.
! 797: * Any improvement of DGEQP3 improves overal performance of DGEJSV.
! 798: *
! 799: * A * P1 = Q1 * [ R1^t 0]^t:
! 800: DO 1963 p = 1, N
! 801: * .. all columns are free columns
! 802: IWORK(p) = 0
! 803: 1963 CONTINUE
! 804: CALL DGEQP3( M,N,A,LDA, IWORK,WORK, WORK(N+1),LWORK-N, IERR )
! 805: *
! 806: * The upper triangular matrix R1 from the first QRF is inspected for
! 807: * rank deficiency and possibilities for deflation, or possible
! 808: * ill-conditioning. Depending on the user specified flag L2RANK,
! 809: * the procedure explores possibilities to reduce the numerical
! 810: * rank by inspecting the computed upper triangular factor. If
! 811: * L2RANK or L2ABER are up, then DGEJSV will compute the SVD of
! 812: * A + dA, where ||dA|| <= f(M,N)*EPSLN.
! 813: *
! 814: NR = 1
! 815: IF ( L2ABER ) THEN
! 816: * Standard absolute error bound suffices. All sigma_i with
! 817: * sigma_i < N*EPSLN*||A|| are flushed to zero. This is an
! 818: * agressive enforcement of lower numerical rank by introducing a
! 819: * backward error of the order of N*EPSLN*||A||.
! 820: TEMP1 = DSQRT(DBLE(N))*EPSLN
! 821: DO 3001 p = 2, N
! 822: IF ( DABS(A(p,p)) .GE. (TEMP1*DABS(A(1,1))) ) THEN
! 823: NR = NR + 1
! 824: ELSE
! 825: GO TO 3002
! 826: END IF
! 827: 3001 CONTINUE
! 828: 3002 CONTINUE
! 829: ELSE IF ( L2RANK ) THEN
! 830: * .. similarly as above, only slightly more gentle (less agressive).
! 831: * Sudden drop on the diagonal of R1 is used as the criterion for
! 832: * close-to-rank-defficient.
! 833: TEMP1 = DSQRT(SFMIN)
! 834: DO 3401 p = 2, N
! 835: IF ( ( DABS(A(p,p)) .LT. (EPSLN*DABS(A(p-1,p-1))) ) .OR.
! 836: & ( DABS(A(p,p)) .LT. SMALL ) .OR.
! 837: & ( L2KILL .AND. (DABS(A(p,p)) .LT. TEMP1) ) ) GO TO 3402
! 838: NR = NR + 1
! 839: 3401 CONTINUE
! 840: 3402 CONTINUE
! 841: *
! 842: ELSE
! 843: * The goal is high relative accuracy. However, if the matrix
! 844: * has high scaled condition number the relative accuracy is in
! 845: * general not feasible. Later on, a condition number estimator
! 846: * will be deployed to estimate the scaled condition number.
! 847: * Here we just remove the underflowed part of the triangular
! 848: * factor. This prevents the situation in which the code is
! 849: * working hard to get the accuracy not warranted by the data.
! 850: TEMP1 = DSQRT(SFMIN)
! 851: DO 3301 p = 2, N
! 852: IF ( ( DABS(A(p,p)) .LT. SMALL ) .OR.
! 853: & ( L2KILL .AND. (DABS(A(p,p)) .LT. TEMP1) ) ) GO TO 3302
! 854: NR = NR + 1
! 855: 3301 CONTINUE
! 856: 3302 CONTINUE
! 857: *
! 858: END IF
! 859: *
! 860: ALMORT = .FALSE.
! 861: IF ( NR .EQ. N ) THEN
! 862: MAXPRJ = ONE
! 863: DO 3051 p = 2, N
! 864: TEMP1 = DABS(A(p,p)) / SVA(IWORK(p))
! 865: MAXPRJ = DMIN1( MAXPRJ, TEMP1 )
! 866: 3051 CONTINUE
! 867: IF ( MAXPRJ**2 .GE. ONE - DBLE(N)*EPSLN ) ALMORT = .TRUE.
! 868: END IF
! 869: *
! 870: *
! 871: SCONDA = - ONE
! 872: CONDR1 = - ONE
! 873: CONDR2 = - ONE
! 874: *
! 875: IF ( ERREST ) THEN
! 876: IF ( N .EQ. NR ) THEN
! 877: IF ( RSVEC ) THEN
! 878: * .. V is available as workspace
! 879: CALL DLACPY( 'U', N, N, A, LDA, V, LDV )
! 880: DO 3053 p = 1, N
! 881: TEMP1 = SVA(IWORK(p))
! 882: CALL DSCAL( p, ONE/TEMP1, V(1,p), 1 )
! 883: 3053 CONTINUE
! 884: CALL DPOCON( 'U', N, V, LDV, ONE, TEMP1,
! 885: & WORK(N+1), IWORK(2*N+M+1), IERR )
! 886: ELSE IF ( LSVEC ) THEN
! 887: * .. U is available as workspace
! 888: CALL DLACPY( 'U', N, N, A, LDA, U, LDU )
! 889: DO 3054 p = 1, N
! 890: TEMP1 = SVA(IWORK(p))
! 891: CALL DSCAL( p, ONE/TEMP1, U(1,p), 1 )
! 892: 3054 CONTINUE
! 893: CALL DPOCON( 'U', N, U, LDU, ONE, TEMP1,
! 894: & WORK(N+1), IWORK(2*N+M+1), IERR )
! 895: ELSE
! 896: CALL DLACPY( 'U', N, N, A, LDA, WORK(N+1), N )
! 897: DO 3052 p = 1, N
! 898: TEMP1 = SVA(IWORK(p))
! 899: CALL DSCAL( p, ONE/TEMP1, WORK(N+(p-1)*N+1), 1 )
! 900: 3052 CONTINUE
! 901: * .. the columns of R are scaled to have unit Euclidean lengths.
! 902: CALL DPOCON( 'U', N, WORK(N+1), N, ONE, TEMP1,
! 903: & WORK(N+N*N+1), IWORK(2*N+M+1), IERR )
! 904: END IF
! 905: SCONDA = ONE / DSQRT(TEMP1)
! 906: * SCONDA is an estimate of DSQRT(||(R^t * R)^(-1)||_1).
! 907: * N^(-1/4) * SCONDA <= ||R^(-1)||_2 <= N^(1/4) * SCONDA
! 908: ELSE
! 909: SCONDA = - ONE
! 910: END IF
! 911: END IF
! 912: *
! 913: L2PERT = L2PERT .AND. ( DABS( A(1,1)/A(NR,NR) ) .GT. DSQRT(BIG1) )
! 914: * If there is no violent scaling, artificial perturbation is not needed.
! 915: *
! 916: * Phase 3:
! 917: *
! 918:
! 919: IF ( .NOT. ( RSVEC .OR. LSVEC ) ) THEN
! 920: *
! 921: * Singular Values only
! 922: *
! 923: * .. transpose A(1:NR,1:N)
! 924: DO 1946 p = 1, MIN0( N-1, NR )
! 925: CALL DCOPY( N-p, A(p,p+1), LDA, A(p+1,p), 1 )
! 926: 1946 CONTINUE
! 927: *
! 928: * The following two DO-loops introduce small relative perturbation
! 929: * into the strict upper triangle of the lower triangular matrix.
! 930: * Small entries below the main diagonal are also changed.
! 931: * This modification is useful if the computing environment does not
! 932: * provide/allow FLUSH TO ZERO underflow, for it prevents many
! 933: * annoying denormalized numbers in case of strongly scaled matrices.
! 934: * The perturbation is structured so that it does not introduce any
! 935: * new perturbation of the singular values, and it does not destroy
! 936: * the job done by the preconditioner.
! 937: * The licence for this perturbation is in the variable L2PERT, which
! 938: * should be .FALSE. if FLUSH TO ZERO underflow is active.
! 939: *
! 940: IF ( .NOT. ALMORT ) THEN
! 941: *
! 942: IF ( L2PERT ) THEN
! 943: * XSC = DSQRT(SMALL)
! 944: XSC = EPSLN / DBLE(N)
! 945: DO 4947 q = 1, NR
! 946: TEMP1 = XSC*DABS(A(q,q))
! 947: DO 4949 p = 1, N
! 948: IF ( ( (p.GT.q) .AND. (DABS(A(p,q)).LE.TEMP1) )
! 949: & .OR. ( p .LT. q ) )
! 950: & A(p,q) = DSIGN( TEMP1, A(p,q) )
! 951: 4949 CONTINUE
! 952: 4947 CONTINUE
! 953: ELSE
! 954: CALL DLASET( 'U', NR-1,NR-1, ZERO,ZERO, A(1,2),LDA )
! 955: END IF
! 956: *
! 957: * .. second preconditioning using the QR factorization
! 958: *
! 959: CALL DGEQRF( N,NR, A,LDA, WORK, WORK(N+1),LWORK-N, IERR )
! 960: *
! 961: * .. and transpose upper to lower triangular
! 962: DO 1948 p = 1, NR - 1
! 963: CALL DCOPY( NR-p, A(p,p+1), LDA, A(p+1,p), 1 )
! 964: 1948 CONTINUE
! 965: *
! 966: END IF
! 967: *
! 968: * Row-cyclic Jacobi SVD algorithm with column pivoting
! 969: *
! 970: * .. again some perturbation (a "background noise") is added
! 971: * to drown denormals
! 972: IF ( L2PERT ) THEN
! 973: * XSC = DSQRT(SMALL)
! 974: XSC = EPSLN / DBLE(N)
! 975: DO 1947 q = 1, NR
! 976: TEMP1 = XSC*DABS(A(q,q))
! 977: DO 1949 p = 1, NR
! 978: IF ( ( (p.GT.q) .AND. (DABS(A(p,q)).LE.TEMP1) )
! 979: & .OR. ( p .LT. q ) )
! 980: & A(p,q) = DSIGN( TEMP1, A(p,q) )
! 981: 1949 CONTINUE
! 982: 1947 CONTINUE
! 983: ELSE
! 984: CALL DLASET( 'U', NR-1, NR-1, ZERO, ZERO, A(1,2), LDA )
! 985: END IF
! 986: *
! 987: * .. and one-sided Jacobi rotations are started on a lower
! 988: * triangular matrix (plus perturbation which is ignored in
! 989: * the part which destroys triangular form (confusing?!))
! 990: *
! 991: CALL DGESVJ( 'L', 'NoU', 'NoV', NR, NR, A, LDA, SVA,
! 992: & N, V, LDV, WORK, LWORK, INFO )
! 993: *
! 994: SCALEM = WORK(1)
! 995: NUMRANK = IDNINT(WORK(2))
! 996: *
! 997: *
! 998: ELSE IF ( RSVEC .AND. ( .NOT. LSVEC ) ) THEN
! 999: *
! 1000: * -> Singular Values and Right Singular Vectors <-
! 1001: *
! 1002: IF ( ALMORT ) THEN
! 1003: *
! 1004: * .. in this case NR equals N
! 1005: DO 1998 p = 1, NR
! 1006: CALL DCOPY( N-p+1, A(p,p), LDA, V(p,p), 1 )
! 1007: 1998 CONTINUE
! 1008: CALL DLASET( 'Upper', NR-1, NR-1, ZERO, ZERO, V(1,2), LDV )
! 1009: *
! 1010: CALL DGESVJ( 'L','U','N', N, NR, V,LDV, SVA, NR, A,LDA,
! 1011: & WORK, LWORK, INFO )
! 1012: SCALEM = WORK(1)
! 1013: NUMRANK = IDNINT(WORK(2))
! 1014:
! 1015: ELSE
! 1016: *
! 1017: * .. two more QR factorizations ( one QRF is not enough, two require
! 1018: * accumulated product of Jacobi rotations, three are perfect )
! 1019: *
! 1020: CALL DLASET( 'Lower', NR-1, NR-1, ZERO, ZERO, A(2,1), LDA )
! 1021: CALL DGELQF( NR, N, A, LDA, WORK, WORK(N+1), LWORK-N, IERR)
! 1022: CALL DLACPY( 'Lower', NR, NR, A, LDA, V, LDV )
! 1023: CALL DLASET( 'Upper', NR-1, NR-1, ZERO, ZERO, V(1,2), LDV )
! 1024: CALL DGEQRF( NR, NR, V, LDV, WORK(N+1), WORK(2*N+1),
! 1025: & LWORK-2*N, IERR )
! 1026: DO 8998 p = 1, NR
! 1027: CALL DCOPY( NR-p+1, V(p,p), LDV, V(p,p), 1 )
! 1028: 8998 CONTINUE
! 1029: CALL DLASET( 'Upper', NR-1, NR-1, ZERO, ZERO, V(1,2), LDV )
! 1030: *
! 1031: CALL DGESVJ( 'Lower', 'U','N', NR, NR, V,LDV, SVA, NR, U,
! 1032: & LDU, WORK(N+1), LWORK, INFO )
! 1033: SCALEM = WORK(N+1)
! 1034: NUMRANK = IDNINT(WORK(N+2))
! 1035: IF ( NR .LT. N ) THEN
! 1036: CALL DLASET( 'A',N-NR, NR, ZERO,ZERO, V(NR+1,1), LDV )
! 1037: CALL DLASET( 'A',NR, N-NR, ZERO,ZERO, V(1,NR+1), LDV )
! 1038: CALL DLASET( 'A',N-NR,N-NR,ZERO,ONE, V(NR+1,NR+1), LDV )
! 1039: END IF
! 1040: *
! 1041: CALL DORMLQ( 'Left', 'Transpose', N, N, NR, A, LDA, WORK,
! 1042: & V, LDV, WORK(N+1), LWORK-N, IERR )
! 1043: *
! 1044: END IF
! 1045: *
! 1046: DO 8991 p = 1, N
! 1047: CALL DCOPY( N, V(p,1), LDV, A(IWORK(p),1), LDA )
! 1048: 8991 CONTINUE
! 1049: CALL DLACPY( 'All', N, N, A, LDA, V, LDV )
! 1050: *
! 1051: IF ( TRANSP ) THEN
! 1052: CALL DLACPY( 'All', N, N, V, LDV, U, LDU )
! 1053: END IF
! 1054: *
! 1055: ELSE IF ( LSVEC .AND. ( .NOT. RSVEC ) ) THEN
! 1056: *
! 1057: * .. Singular Values and Left Singular Vectors ..
! 1058: *
! 1059: * .. second preconditioning step to avoid need to accumulate
! 1060: * Jacobi rotations in the Jacobi iterations.
! 1061: DO 1965 p = 1, NR
! 1062: CALL DCOPY( N-p+1, A(p,p), LDA, U(p,p), 1 )
! 1063: 1965 CONTINUE
! 1064: CALL DLASET( 'Upper', NR-1, NR-1, ZERO, ZERO, U(1,2), LDU )
! 1065: *
! 1066: CALL DGEQRF( N, NR, U, LDU, WORK(N+1), WORK(2*N+1),
! 1067: & LWORK-2*N, IERR )
! 1068: *
! 1069: DO 1967 p = 1, NR - 1
! 1070: CALL DCOPY( NR-p, U(p,p+1), LDU, U(p+1,p), 1 )
! 1071: 1967 CONTINUE
! 1072: CALL DLASET( 'Upper', NR-1, NR-1, ZERO, ZERO, U(1,2), LDU )
! 1073: *
! 1074: CALL DGESVJ( 'Lower', 'U', 'N', NR,NR, U, LDU, SVA, NR, A,
! 1075: & LDA, WORK(N+1), LWORK-N, INFO )
! 1076: SCALEM = WORK(N+1)
! 1077: NUMRANK = IDNINT(WORK(N+2))
! 1078: *
! 1079: IF ( NR .LT. M ) THEN
! 1080: CALL DLASET( 'A', M-NR, NR,ZERO, ZERO, U(NR+1,1), LDU )
! 1081: IF ( NR .LT. N1 ) THEN
! 1082: CALL DLASET( 'A',NR, N1-NR, ZERO, ZERO, U(1,NR+1), LDU )
! 1083: CALL DLASET( 'A',M-NR,N1-NR,ZERO,ONE,U(NR+1,NR+1), LDU )
! 1084: END IF
! 1085: END IF
! 1086: *
! 1087: CALL DORMQR( 'Left', 'No Tr', M, N1, N, A, LDA, WORK, U,
! 1088: & LDU, WORK(N+1), LWORK-N, IERR )
! 1089: *
! 1090: IF ( ROWPIV )
! 1091: & CALL DLASWP( N1, U, LDU, 1, M-1, IWORK(2*N+1), -1 )
! 1092: *
! 1093: DO 1974 p = 1, N1
! 1094: XSC = ONE / DNRM2( M, U(1,p), 1 )
! 1095: CALL DSCAL( M, XSC, U(1,p), 1 )
! 1096: 1974 CONTINUE
! 1097: *
! 1098: IF ( TRANSP ) THEN
! 1099: CALL DLACPY( 'All', N, N, U, LDU, V, LDV )
! 1100: END IF
! 1101: *
! 1102: ELSE
! 1103: *
! 1104: * .. Full SVD ..
! 1105: *
! 1106: IF ( .NOT. JRACC ) THEN
! 1107: *
! 1108: IF ( .NOT. ALMORT ) THEN
! 1109: *
! 1110: * Second Preconditioning Step (QRF [with pivoting])
! 1111: * Note that the composition of TRANSPOSE, QRF and TRANSPOSE is
! 1112: * equivalent to an LQF CALL. Since in many libraries the QRF
! 1113: * seems to be better optimized than the LQF, we do explicit
! 1114: * transpose and use the QRF. This is subject to changes in an
! 1115: * optimized implementation of DGEJSV.
! 1116: *
! 1117: DO 1968 p = 1, NR
! 1118: CALL DCOPY( N-p+1, A(p,p), LDA, V(p,p), 1 )
! 1119: 1968 CONTINUE
! 1120: *
! 1121: * .. the following two loops perturb small entries to avoid
! 1122: * denormals in the second QR factorization, where they are
! 1123: * as good as zeros. This is done to avoid painfully slow
! 1124: * computation with denormals. The relative size of the perturbation
! 1125: * is a parameter that can be changed by the implementer.
! 1126: * This perturbation device will be obsolete on machines with
! 1127: * properly implemented arithmetic.
! 1128: * To switch it off, set L2PERT=.FALSE. To remove it from the
! 1129: * code, remove the action under L2PERT=.TRUE., leave the ELSE part.
! 1130: * The following two loops should be blocked and fused with the
! 1131: * transposed copy above.
! 1132: *
! 1133: IF ( L2PERT ) THEN
! 1134: XSC = DSQRT(SMALL)
! 1135: DO 2969 q = 1, NR
! 1136: TEMP1 = XSC*DABS( V(q,q) )
! 1137: DO 2968 p = 1, N
! 1138: IF ( ( p .GT. q ) .AND. ( DABS(V(p,q)) .LE. TEMP1 )
! 1139: & .OR. ( p .LT. q ) )
! 1140: & V(p,q) = DSIGN( TEMP1, V(p,q) )
! 1141: IF ( p. LT. q ) V(p,q) = - V(p,q)
! 1142: 2968 CONTINUE
! 1143: 2969 CONTINUE
! 1144: ELSE
! 1145: CALL DLASET( 'U', NR-1, NR-1, ZERO, ZERO, V(1,2), LDV )
! 1146: END IF
! 1147: *
! 1148: * Estimate the row scaled condition number of R1
! 1149: * (If R1 is rectangular, N > NR, then the condition number
! 1150: * of the leading NR x NR submatrix is estimated.)
! 1151: *
! 1152: CALL DLACPY( 'L', NR, NR, V, LDV, WORK(2*N+1), NR )
! 1153: DO 3950 p = 1, NR
! 1154: TEMP1 = DNRM2(NR-p+1,WORK(2*N+(p-1)*NR+p),1)
! 1155: CALL DSCAL(NR-p+1,ONE/TEMP1,WORK(2*N+(p-1)*NR+p),1)
! 1156: 3950 CONTINUE
! 1157: CALL DPOCON('Lower',NR,WORK(2*N+1),NR,ONE,TEMP1,
! 1158: & WORK(2*N+NR*NR+1),IWORK(M+2*N+1),IERR)
! 1159: CONDR1 = ONE / DSQRT(TEMP1)
! 1160: * .. here need a second oppinion on the condition number
! 1161: * .. then assume worst case scenario
! 1162: * R1 is OK for inverse <=> CONDR1 .LT. DBLE(N)
! 1163: * more conservative <=> CONDR1 .LT. DSQRT(DBLE(N))
! 1164: *
! 1165: COND_OK = DSQRT(DBLE(NR))
! 1166: *[TP] COND_OK is a tuning parameter.
! 1167:
! 1168: IF ( CONDR1 .LT. COND_OK ) THEN
! 1169: * .. the second QRF without pivoting. Note: in an optimized
! 1170: * implementation, this QRF should be implemented as the QRF
! 1171: * of a lower triangular matrix.
! 1172: * R1^t = Q2 * R2
! 1173: CALL DGEQRF( N, NR, V, LDV, WORK(N+1), WORK(2*N+1),
! 1174: & LWORK-2*N, IERR )
! 1175: *
! 1176: IF ( L2PERT ) THEN
! 1177: XSC = DSQRT(SMALL)/EPSLN
! 1178: DO 3959 p = 2, NR
! 1179: DO 3958 q = 1, p - 1
! 1180: TEMP1 = XSC * DMIN1(DABS(V(p,p)),DABS(V(q,q)))
! 1181: IF ( DABS(V(q,p)) .LE. TEMP1 )
! 1182: & V(q,p) = DSIGN( TEMP1, V(q,p) )
! 1183: 3958 CONTINUE
! 1184: 3959 CONTINUE
! 1185: END IF
! 1186: *
! 1187: IF ( NR .NE. N )
! 1188: * .. save ...
! 1189: & CALL DLACPY( 'A', N, NR, V, LDV, WORK(2*N+1), N )
! 1190: *
! 1191: * .. this transposed copy should be better than naive
! 1192: DO 1969 p = 1, NR - 1
! 1193: CALL DCOPY( NR-p, V(p,p+1), LDV, V(p+1,p), 1 )
! 1194: 1969 CONTINUE
! 1195: *
! 1196: CONDR2 = CONDR1
! 1197: *
! 1198: ELSE
! 1199: *
! 1200: * .. ill-conditioned case: second QRF with pivoting
! 1201: * Note that windowed pivoting would be equaly good
! 1202: * numerically, and more run-time efficient. So, in
! 1203: * an optimal implementation, the next call to DGEQP3
! 1204: * should be replaced with eg. CALL SGEQPX (ACM TOMS #782)
! 1205: * with properly (carefully) chosen parameters.
! 1206: *
! 1207: * R1^t * P2 = Q2 * R2
! 1208: DO 3003 p = 1, NR
! 1209: IWORK(N+p) = 0
! 1210: 3003 CONTINUE
! 1211: CALL DGEQP3( N, NR, V, LDV, IWORK(N+1), WORK(N+1),
! 1212: & WORK(2*N+1), LWORK-2*N, IERR )
! 1213: ** CALL DGEQRF( N, NR, V, LDV, WORK(N+1), WORK(2*N+1),
! 1214: ** & LWORK-2*N, IERR )
! 1215: IF ( L2PERT ) THEN
! 1216: XSC = DSQRT(SMALL)
! 1217: DO 3969 p = 2, NR
! 1218: DO 3968 q = 1, p - 1
! 1219: TEMP1 = XSC * DMIN1(DABS(V(p,p)),DABS(V(q,q)))
! 1220: IF ( DABS(V(q,p)) .LE. TEMP1 )
! 1221: & V(q,p) = DSIGN( TEMP1, V(q,p) )
! 1222: 3968 CONTINUE
! 1223: 3969 CONTINUE
! 1224: END IF
! 1225: *
! 1226: CALL DLACPY( 'A', N, NR, V, LDV, WORK(2*N+1), N )
! 1227: *
! 1228: IF ( L2PERT ) THEN
! 1229: XSC = DSQRT(SMALL)
! 1230: DO 8970 p = 2, NR
! 1231: DO 8971 q = 1, p - 1
! 1232: TEMP1 = XSC * DMIN1(DABS(V(p,p)),DABS(V(q,q)))
! 1233: V(p,q) = - DSIGN( TEMP1, V(q,p) )
! 1234: 8971 CONTINUE
! 1235: 8970 CONTINUE
! 1236: ELSE
! 1237: CALL DLASET( 'L',NR-1,NR-1,ZERO,ZERO,V(2,1),LDV )
! 1238: END IF
! 1239: * Now, compute R2 = L3 * Q3, the LQ factorization.
! 1240: CALL DGELQF( NR, NR, V, LDV, WORK(2*N+N*NR+1),
! 1241: & WORK(2*N+N*NR+NR+1), LWORK-2*N-N*NR-NR, IERR )
! 1242: * .. and estimate the condition number
! 1243: CALL DLACPY( 'L',NR,NR,V,LDV,WORK(2*N+N*NR+NR+1),NR )
! 1244: DO 4950 p = 1, NR
! 1245: TEMP1 = DNRM2( p, WORK(2*N+N*NR+NR+p), NR )
! 1246: CALL DSCAL( p, ONE/TEMP1, WORK(2*N+N*NR+NR+p), NR )
! 1247: 4950 CONTINUE
! 1248: CALL DPOCON( 'L',NR,WORK(2*N+N*NR+NR+1),NR,ONE,TEMP1,
! 1249: & WORK(2*N+N*NR+NR+NR*NR+1),IWORK(M+2*N+1),IERR )
! 1250: CONDR2 = ONE / DSQRT(TEMP1)
! 1251: *
! 1252: IF ( CONDR2 .GE. COND_OK ) THEN
! 1253: * .. save the Householder vectors used for Q3
! 1254: * (this overwrittes the copy of R2, as it will not be
! 1255: * needed in this branch, but it does not overwritte the
! 1256: * Huseholder vectors of Q2.).
! 1257: CALL DLACPY( 'U', NR, NR, V, LDV, WORK(2*N+1), N )
! 1258: * .. and the rest of the information on Q3 is in
! 1259: * WORK(2*N+N*NR+1:2*N+N*NR+N)
! 1260: END IF
! 1261: *
! 1262: END IF
! 1263: *
! 1264: IF ( L2PERT ) THEN
! 1265: XSC = DSQRT(SMALL)
! 1266: DO 4968 q = 2, NR
! 1267: TEMP1 = XSC * V(q,q)
! 1268: DO 4969 p = 1, q - 1
! 1269: * V(p,q) = - DSIGN( TEMP1, V(q,p) )
! 1270: V(p,q) = - DSIGN( TEMP1, V(p,q) )
! 1271: 4969 CONTINUE
! 1272: 4968 CONTINUE
! 1273: ELSE
! 1274: CALL DLASET( 'U', NR-1,NR-1, ZERO,ZERO, V(1,2), LDV )
! 1275: END IF
! 1276: *
! 1277: * Second preconditioning finished; continue with Jacobi SVD
! 1278: * The input matrix is lower trinagular.
! 1279: *
! 1280: * Recover the right singular vectors as solution of a well
! 1281: * conditioned triangular matrix equation.
! 1282: *
! 1283: IF ( CONDR1 .LT. COND_OK ) THEN
! 1284: *
! 1285: CALL DGESVJ( 'L','U','N',NR,NR,V,LDV,SVA,NR,U,
! 1286: & LDU,WORK(2*N+N*NR+NR+1),LWORK-2*N-N*NR-NR,INFO )
! 1287: SCALEM = WORK(2*N+N*NR+NR+1)
! 1288: NUMRANK = IDNINT(WORK(2*N+N*NR+NR+2))
! 1289: DO 3970 p = 1, NR
! 1290: CALL DCOPY( NR, V(1,p), 1, U(1,p), 1 )
! 1291: CALL DSCAL( NR, SVA(p), V(1,p), 1 )
! 1292: 3970 CONTINUE
! 1293:
! 1294: * .. pick the right matrix equation and solve it
! 1295: *
! 1296: IF ( NR. EQ. N ) THEN
! 1297: * :)) .. best case, R1 is inverted. The solution of this matrix
! 1298: * equation is Q2*V2 = the product of the Jacobi rotations
! 1299: * used in DGESVJ, premultiplied with the orthogonal matrix
! 1300: * from the second QR factorization.
! 1301: CALL DTRSM( 'L','U','N','N', NR,NR,ONE, A,LDA, V,LDV )
! 1302: ELSE
! 1303: * .. R1 is well conditioned, but non-square. Transpose(R2)
! 1304: * is inverted to get the product of the Jacobi rotations
! 1305: * used in DGESVJ. The Q-factor from the second QR
! 1306: * factorization is then built in explicitly.
! 1307: CALL DTRSM('L','U','T','N',NR,NR,ONE,WORK(2*N+1),
! 1308: & N,V,LDV)
! 1309: IF ( NR .LT. N ) THEN
! 1310: CALL DLASET('A',N-NR,NR,ZERO,ZERO,V(NR+1,1),LDV)
! 1311: CALL DLASET('A',NR,N-NR,ZERO,ZERO,V(1,NR+1),LDV)
! 1312: CALL DLASET('A',N-NR,N-NR,ZERO,ONE,V(NR+1,NR+1),LDV)
! 1313: END IF
! 1314: CALL DORMQR('L','N',N,N,NR,WORK(2*N+1),N,WORK(N+1),
! 1315: & V,LDV,WORK(2*N+N*NR+NR+1),LWORK-2*N-N*NR-NR,IERR)
! 1316: END IF
! 1317: *
! 1318: ELSE IF ( CONDR2 .LT. COND_OK ) THEN
! 1319: *
! 1320: * :) .. the input matrix A is very likely a relative of
! 1321: * the Kahan matrix :)
! 1322: * The matrix R2 is inverted. The solution of the matrix equation
! 1323: * is Q3^T*V3 = the product of the Jacobi rotations (appplied to
! 1324: * the lower triangular L3 from the LQ factorization of
! 1325: * R2=L3*Q3), pre-multiplied with the transposed Q3.
! 1326: CALL DGESVJ( 'L', 'U', 'N', NR, NR, V, LDV, SVA, NR, U,
! 1327: & LDU, WORK(2*N+N*NR+NR+1), LWORK-2*N-N*NR-NR, INFO )
! 1328: SCALEM = WORK(2*N+N*NR+NR+1)
! 1329: NUMRANK = IDNINT(WORK(2*N+N*NR+NR+2))
! 1330: DO 3870 p = 1, NR
! 1331: CALL DCOPY( NR, V(1,p), 1, U(1,p), 1 )
! 1332: CALL DSCAL( NR, SVA(p), U(1,p), 1 )
! 1333: 3870 CONTINUE
! 1334: CALL DTRSM('L','U','N','N',NR,NR,ONE,WORK(2*N+1),N,U,LDU)
! 1335: * .. apply the permutation from the second QR factorization
! 1336: DO 873 q = 1, NR
! 1337: DO 872 p = 1, NR
! 1338: WORK(2*N+N*NR+NR+IWORK(N+p)) = U(p,q)
! 1339: 872 CONTINUE
! 1340: DO 874 p = 1, NR
! 1341: U(p,q) = WORK(2*N+N*NR+NR+p)
! 1342: 874 CONTINUE
! 1343: 873 CONTINUE
! 1344: IF ( NR .LT. N ) THEN
! 1345: CALL DLASET( 'A',N-NR,NR,ZERO,ZERO,V(NR+1,1),LDV )
! 1346: CALL DLASET( 'A',NR,N-NR,ZERO,ZERO,V(1,NR+1),LDV )
! 1347: CALL DLASET( 'A',N-NR,N-NR,ZERO,ONE,V(NR+1,NR+1),LDV )
! 1348: END IF
! 1349: CALL DORMQR( 'L','N',N,N,NR,WORK(2*N+1),N,WORK(N+1),
! 1350: & V,LDV,WORK(2*N+N*NR+NR+1),LWORK-2*N-N*NR-NR,IERR )
! 1351: ELSE
! 1352: * Last line of defense.
! 1353: * #:( This is a rather pathological case: no scaled condition
! 1354: * improvement after two pivoted QR factorizations. Other
! 1355: * possibility is that the rank revealing QR factorization
! 1356: * or the condition estimator has failed, or the COND_OK
! 1357: * is set very close to ONE (which is unnecessary). Normally,
! 1358: * this branch should never be executed, but in rare cases of
! 1359: * failure of the RRQR or condition estimator, the last line of
! 1360: * defense ensures that DGEJSV completes the task.
! 1361: * Compute the full SVD of L3 using DGESVJ with explicit
! 1362: * accumulation of Jacobi rotations.
! 1363: CALL DGESVJ( 'L', 'U', 'V', NR, NR, V, LDV, SVA, NR, U,
! 1364: & LDU, WORK(2*N+N*NR+NR+1), LWORK-2*N-N*NR-NR, INFO )
! 1365: SCALEM = WORK(2*N+N*NR+NR+1)
! 1366: NUMRANK = IDNINT(WORK(2*N+N*NR+NR+2))
! 1367: IF ( NR .LT. N ) THEN
! 1368: CALL DLASET( 'A',N-NR,NR,ZERO,ZERO,V(NR+1,1),LDV )
! 1369: CALL DLASET( 'A',NR,N-NR,ZERO,ZERO,V(1,NR+1),LDV )
! 1370: CALL DLASET( 'A',N-NR,N-NR,ZERO,ONE,V(NR+1,NR+1),LDV )
! 1371: END IF
! 1372: CALL DORMQR( 'L','N',N,N,NR,WORK(2*N+1),N,WORK(N+1),
! 1373: & V,LDV,WORK(2*N+N*NR+NR+1),LWORK-2*N-N*NR-NR,IERR )
! 1374: *
! 1375: CALL DORMLQ( 'L', 'T', NR, NR, NR, WORK(2*N+1), N,
! 1376: & WORK(2*N+N*NR+1), U, LDU, WORK(2*N+N*NR+NR+1),
! 1377: & LWORK-2*N-N*NR-NR, IERR )
! 1378: DO 773 q = 1, NR
! 1379: DO 772 p = 1, NR
! 1380: WORK(2*N+N*NR+NR+IWORK(N+p)) = U(p,q)
! 1381: 772 CONTINUE
! 1382: DO 774 p = 1, NR
! 1383: U(p,q) = WORK(2*N+N*NR+NR+p)
! 1384: 774 CONTINUE
! 1385: 773 CONTINUE
! 1386: *
! 1387: END IF
! 1388: *
! 1389: * Permute the rows of V using the (column) permutation from the
! 1390: * first QRF. Also, scale the columns to make them unit in
! 1391: * Euclidean norm. This applies to all cases.
! 1392: *
! 1393: TEMP1 = DSQRT(DBLE(N)) * EPSLN
! 1394: DO 1972 q = 1, N
! 1395: DO 972 p = 1, N
! 1396: WORK(2*N+N*NR+NR+IWORK(p)) = V(p,q)
! 1397: 972 CONTINUE
! 1398: DO 973 p = 1, N
! 1399: V(p,q) = WORK(2*N+N*NR+NR+p)
! 1400: 973 CONTINUE
! 1401: XSC = ONE / DNRM2( N, V(1,q), 1 )
! 1402: IF ( (XSC .LT. (ONE-TEMP1)) .OR. (XSC .GT. (ONE+TEMP1)) )
! 1403: & CALL DSCAL( N, XSC, V(1,q), 1 )
! 1404: 1972 CONTINUE
! 1405: * At this moment, V contains the right singular vectors of A.
! 1406: * Next, assemble the left singular vector matrix U (M x N).
! 1407: IF ( NR .LT. M ) THEN
! 1408: CALL DLASET( 'A', M-NR, NR, ZERO, ZERO, U(NR+1,1), LDU )
! 1409: IF ( NR .LT. N1 ) THEN
! 1410: CALL DLASET('A',NR,N1-NR,ZERO,ZERO,U(1,NR+1),LDU)
! 1411: CALL DLASET('A',M-NR,N1-NR,ZERO,ONE,U(NR+1,NR+1),LDU)
! 1412: END IF
! 1413: END IF
! 1414: *
! 1415: * The Q matrix from the first QRF is built into the left singular
! 1416: * matrix U. This applies to all cases.
! 1417: *
! 1418: CALL DORMQR( 'Left', 'No_Tr', M, N1, N, A, LDA, WORK, U,
! 1419: & LDU, WORK(N+1), LWORK-N, IERR )
! 1420:
! 1421: * The columns of U are normalized. The cost is O(M*N) flops.
! 1422: TEMP1 = DSQRT(DBLE(M)) * EPSLN
! 1423: DO 1973 p = 1, NR
! 1424: XSC = ONE / DNRM2( M, U(1,p), 1 )
! 1425: IF ( (XSC .LT. (ONE-TEMP1)) .OR. (XSC .GT. (ONE+TEMP1)) )
! 1426: & CALL DSCAL( M, XSC, U(1,p), 1 )
! 1427: 1973 CONTINUE
! 1428: *
! 1429: * If the initial QRF is computed with row pivoting, the left
! 1430: * singular vectors must be adjusted.
! 1431: *
! 1432: IF ( ROWPIV )
! 1433: & CALL DLASWP( N1, U, LDU, 1, M-1, IWORK(2*N+1), -1 )
! 1434: *
! 1435: ELSE
! 1436: *
! 1437: * .. the initial matrix A has almost orthogonal columns and
! 1438: * the second QRF is not needed
! 1439: *
! 1440: CALL DLACPY( 'Upper', N, N, A, LDA, WORK(N+1), N )
! 1441: IF ( L2PERT ) THEN
! 1442: XSC = DSQRT(SMALL)
! 1443: DO 5970 p = 2, N
! 1444: TEMP1 = XSC * WORK( N + (p-1)*N + p )
! 1445: DO 5971 q = 1, p - 1
! 1446: WORK(N+(q-1)*N+p)=-DSIGN(TEMP1,WORK(N+(p-1)*N+q))
! 1447: 5971 CONTINUE
! 1448: 5970 CONTINUE
! 1449: ELSE
! 1450: CALL DLASET( 'Lower',N-1,N-1,ZERO,ZERO,WORK(N+2),N )
! 1451: END IF
! 1452: *
! 1453: CALL DGESVJ( 'Upper', 'U', 'N', N, N, WORK(N+1), N, SVA,
! 1454: & N, U, LDU, WORK(N+N*N+1), LWORK-N-N*N, INFO )
! 1455: *
! 1456: SCALEM = WORK(N+N*N+1)
! 1457: NUMRANK = IDNINT(WORK(N+N*N+2))
! 1458: DO 6970 p = 1, N
! 1459: CALL DCOPY( N, WORK(N+(p-1)*N+1), 1, U(1,p), 1 )
! 1460: CALL DSCAL( N, SVA(p), WORK(N+(p-1)*N+1), 1 )
! 1461: 6970 CONTINUE
! 1462: *
! 1463: CALL DTRSM( 'Left', 'Upper', 'NoTrans', 'No UD', N, N,
! 1464: & ONE, A, LDA, WORK(N+1), N )
! 1465: DO 6972 p = 1, N
! 1466: CALL DCOPY( N, WORK(N+p), N, V(IWORK(p),1), LDV )
! 1467: 6972 CONTINUE
! 1468: TEMP1 = DSQRT(DBLE(N))*EPSLN
! 1469: DO 6971 p = 1, N
! 1470: XSC = ONE / DNRM2( N, V(1,p), 1 )
! 1471: IF ( (XSC .LT. (ONE-TEMP1)) .OR. (XSC .GT. (ONE+TEMP1)) )
! 1472: & CALL DSCAL( N, XSC, V(1,p), 1 )
! 1473: 6971 CONTINUE
! 1474: *
! 1475: * Assemble the left singular vector matrix U (M x N).
! 1476: *
! 1477: IF ( N .LT. M ) THEN
! 1478: CALL DLASET( 'A', M-N, N, ZERO, ZERO, U(NR+1,1), LDU )
! 1479: IF ( N .LT. N1 ) THEN
! 1480: CALL DLASET( 'A',N, N1-N, ZERO, ZERO, U(1,N+1),LDU )
! 1481: CALL DLASET( 'A',M-N,N1-N, ZERO, ONE,U(NR+1,N+1),LDU )
! 1482: END IF
! 1483: END IF
! 1484: CALL DORMQR( 'Left', 'No Tr', M, N1, N, A, LDA, WORK, U,
! 1485: & LDU, WORK(N+1), LWORK-N, IERR )
! 1486: TEMP1 = DSQRT(DBLE(M))*EPSLN
! 1487: DO 6973 p = 1, N1
! 1488: XSC = ONE / DNRM2( M, U(1,p), 1 )
! 1489: IF ( (XSC .LT. (ONE-TEMP1)) .OR. (XSC .GT. (ONE+TEMP1)) )
! 1490: & CALL DSCAL( M, XSC, U(1,p), 1 )
! 1491: 6973 CONTINUE
! 1492: *
! 1493: IF ( ROWPIV )
! 1494: & CALL DLASWP( N1, U, LDU, 1, M-1, IWORK(2*N+1), -1 )
! 1495: *
! 1496: END IF
! 1497: *
! 1498: * end of the >> almost orthogonal case << in the full SVD
! 1499: *
! 1500: ELSE
! 1501: *
! 1502: * This branch deploys a preconditioned Jacobi SVD with explicitly
! 1503: * accumulated rotations. It is included as optional, mainly for
! 1504: * experimental purposes. It does perfom well, and can also be used.
! 1505: * In this implementation, this branch will be automatically activated
! 1506: * if the condition number sigma_max(A) / sigma_min(A) is predicted
! 1507: * to be greater than the overflow threshold. This is because the
! 1508: * a posteriori computation of the singular vectors assumes robust
! 1509: * implementation of BLAS and some LAPACK procedures, capable of working
! 1510: * in presence of extreme values. Since that is not always the case, ...
! 1511: *
! 1512: DO 7968 p = 1, NR
! 1513: CALL DCOPY( N-p+1, A(p,p), LDA, V(p,p), 1 )
! 1514: 7968 CONTINUE
! 1515: *
! 1516: IF ( L2PERT ) THEN
! 1517: XSC = DSQRT(SMALL/EPSLN)
! 1518: DO 5969 q = 1, NR
! 1519: TEMP1 = XSC*DABS( V(q,q) )
! 1520: DO 5968 p = 1, N
! 1521: IF ( ( p .GT. q ) .AND. ( DABS(V(p,q)) .LE. TEMP1 )
! 1522: & .OR. ( p .LT. q ) )
! 1523: & V(p,q) = DSIGN( TEMP1, V(p,q) )
! 1524: IF ( p. LT. q ) V(p,q) = - V(p,q)
! 1525: 5968 CONTINUE
! 1526: 5969 CONTINUE
! 1527: ELSE
! 1528: CALL DLASET( 'U', NR-1, NR-1, ZERO, ZERO, V(1,2), LDV )
! 1529: END IF
! 1530:
! 1531: CALL DGEQRF( N, NR, V, LDV, WORK(N+1), WORK(2*N+1),
! 1532: & LWORK-2*N, IERR )
! 1533: CALL DLACPY( 'L', N, NR, V, LDV, WORK(2*N+1), N )
! 1534: *
! 1535: DO 7969 p = 1, NR
! 1536: CALL DCOPY( NR-p+1, V(p,p), LDV, U(p,p), 1 )
! 1537: 7969 CONTINUE
! 1538:
! 1539: IF ( L2PERT ) THEN
! 1540: XSC = DSQRT(SMALL/EPSLN)
! 1541: DO 9970 q = 2, NR
! 1542: DO 9971 p = 1, q - 1
! 1543: TEMP1 = XSC * DMIN1(DABS(U(p,p)),DABS(U(q,q)))
! 1544: U(p,q) = - DSIGN( TEMP1, U(q,p) )
! 1545: 9971 CONTINUE
! 1546: 9970 CONTINUE
! 1547: ELSE
! 1548: CALL DLASET('U', NR-1, NR-1, ZERO, ZERO, U(1,2), LDU )
! 1549: END IF
! 1550:
! 1551: CALL DGESVJ( 'G', 'U', 'V', NR, NR, U, LDU, SVA,
! 1552: & N, V, LDV, WORK(2*N+N*NR+1), LWORK-2*N-N*NR, INFO )
! 1553: SCALEM = WORK(2*N+N*NR+1)
! 1554: NUMRANK = IDNINT(WORK(2*N+N*NR+2))
! 1555:
! 1556: IF ( NR .LT. N ) THEN
! 1557: CALL DLASET( 'A',N-NR,NR,ZERO,ZERO,V(NR+1,1),LDV )
! 1558: CALL DLASET( 'A',NR,N-NR,ZERO,ZERO,V(1,NR+1),LDV )
! 1559: CALL DLASET( 'A',N-NR,N-NR,ZERO,ONE,V(NR+1,NR+1),LDV )
! 1560: END IF
! 1561:
! 1562: CALL DORMQR( 'L','N',N,N,NR,WORK(2*N+1),N,WORK(N+1),
! 1563: & V,LDV,WORK(2*N+N*NR+NR+1),LWORK-2*N-N*NR-NR,IERR )
! 1564: *
! 1565: * Permute the rows of V using the (column) permutation from the
! 1566: * first QRF. Also, scale the columns to make them unit in
! 1567: * Euclidean norm. This applies to all cases.
! 1568: *
! 1569: TEMP1 = DSQRT(DBLE(N)) * EPSLN
! 1570: DO 7972 q = 1, N
! 1571: DO 8972 p = 1, N
! 1572: WORK(2*N+N*NR+NR+IWORK(p)) = V(p,q)
! 1573: 8972 CONTINUE
! 1574: DO 8973 p = 1, N
! 1575: V(p,q) = WORK(2*N+N*NR+NR+p)
! 1576: 8973 CONTINUE
! 1577: XSC = ONE / DNRM2( N, V(1,q), 1 )
! 1578: IF ( (XSC .LT. (ONE-TEMP1)) .OR. (XSC .GT. (ONE+TEMP1)) )
! 1579: & CALL DSCAL( N, XSC, V(1,q), 1 )
! 1580: 7972 CONTINUE
! 1581: *
! 1582: * At this moment, V contains the right singular vectors of A.
! 1583: * Next, assemble the left singular vector matrix U (M x N).
! 1584: *
! 1585: IF ( N .LT. M ) THEN
! 1586: CALL DLASET( 'A', M-N, N, ZERO, ZERO, U(NR+1,1), LDU )
! 1587: IF ( N .LT. N1 ) THEN
! 1588: CALL DLASET( 'A',N, N1-N, ZERO, ZERO, U(1,N+1),LDU )
! 1589: CALL DLASET( 'A',M-N,N1-N, ZERO, ONE,U(NR+1,N+1),LDU )
! 1590: END IF
! 1591: END IF
! 1592: *
! 1593: CALL DORMQR( 'Left', 'No Tr', M, N1, N, A, LDA, WORK, U,
! 1594: & LDU, WORK(N+1), LWORK-N, IERR )
! 1595: *
! 1596: IF ( ROWPIV )
! 1597: & CALL DLASWP( N1, U, LDU, 1, M-1, IWORK(2*N+1), -1 )
! 1598: *
! 1599: *
! 1600: END IF
! 1601: IF ( TRANSP ) THEN
! 1602: * .. swap U and V because the procedure worked on A^t
! 1603: DO 6974 p = 1, N
! 1604: CALL DSWAP( N, U(1,p), 1, V(1,p), 1 )
! 1605: 6974 CONTINUE
! 1606: END IF
! 1607: *
! 1608: END IF
! 1609: * end of the full SVD
! 1610: *
! 1611: * Undo scaling, if necessary (and possible)
! 1612: *
! 1613: IF ( USCAL2 .LE. (BIG/SVA(1))*USCAL1 ) THEN
! 1614: CALL DLASCL( 'G', 0, 0, USCAL1, USCAL2, NR, 1, SVA, N, IERR )
! 1615: USCAL1 = ONE
! 1616: USCAL2 = ONE
! 1617: END IF
! 1618: *
! 1619: IF ( NR .LT. N ) THEN
! 1620: DO 3004 p = NR+1, N
! 1621: SVA(p) = ZERO
! 1622: 3004 CONTINUE
! 1623: END IF
! 1624: *
! 1625: WORK(1) = USCAL2 * SCALEM
! 1626: WORK(2) = USCAL1
! 1627: IF ( ERREST ) WORK(3) = SCONDA
! 1628: IF ( LSVEC .AND. RSVEC ) THEN
! 1629: WORK(4) = CONDR1
! 1630: WORK(5) = CONDR2
! 1631: END IF
! 1632: IF ( L2TRAN ) THEN
! 1633: WORK(6) = ENTRA
! 1634: WORK(7) = ENTRAT
! 1635: END IF
! 1636: *
! 1637: IWORK(1) = NR
! 1638: IWORK(2) = NUMRANK
! 1639: IWORK(3) = WARNING
! 1640: *
! 1641: RETURN
! 1642: * ..
! 1643: * .. END OF DGEJSV
! 1644: * ..
! 1645: END
! 1646: *
CVSweb interface <joel.bertrand@systella.fr>