[BACK]Return to README CVS log [TXT] [DIR] Up to [local] / rpl

Diff for /rpl/README between versions 1.4 and 1.26

version 1.4, 2010/04/17 18:57:33 version 1.26, 2013/03/23 17:57:55
Line 10 Line 10
   
     I SHALL NOT ACCEPT ANY BUG REPORT FROM USERS THAT HAVE BUILD RPL/2 WITH      I SHALL NOT ACCEPT ANY BUG REPORT FROM USERS THAT HAVE BUILD RPL/2 WITH
     LESSTIF LIBRAIRIES SINCE OPENMOTIF IS AVAILABLE.      LESSTIF LIBRAIRIES SINCE OPENMOTIF IS AVAILABLE.
   
       DO NOT USE 'make install-strip' THAT BREAKS RPL/2.
 --------------------------------------------------------------------------------  --------------------------------------------------------------------------------
   
     RPL/2 signifies Reverse Polish Lisp/2. This language is obvious derivated      RPL/2 signifies Reverse Polish Lisp/2. This language is obvious derivated
Line 20  symbolic and scientific computations. Line 22  symbolic and scientific computations.
   
   * RPL/2 requires :    * RPL/2 requires :
     - nawk or gawk;      - nawk or gawk;
       - gmake;
     - libtool 1.5 or newer. To build RPL/2 on Mac OSX, you should have to      - libtool 1.5 or newer. To build RPL/2 on Mac OSX, you should have to
     add libtool m4 path in tools/file-*/configure.ac and      add libtool m4 path in tools/file-*/configure.ac and
     tools/file-*/Makefile.am;      tools/file-*/Makefile.am;
     - gcc-4.2 or newer;      - gcc-4.4 or newer;
     - g++-4.2 or newer;      - g++-4.4 or newer;
     - gfortran-4.2 or newer.      - gfortran-4.4 or newer.
   
     RPL/2 build process invoques automake and autoconf.      RPL/2 build process invoques automake and autoconf.
   
Line 36  error related to OpenSSL, you shall try Line 39  error related to OpenSSL, you shall try
 'make'. On some system, OpenSSL configure script is unable to set compiler  'make'. On some system, OpenSSL configure script is unable to set compiler
 flags.  flags.
   
     * RPL/2 cross compilation :
   
       To cross-compile RPL/2, you have to build in a first time a native
       RPL/2 on build host. Installation is not required. In a second time,
       you have to configure RPL/2 for target host in another directory like :
   
   ../rpl/configure --host=arm-unknown-linux-gnueabi --enable-full-static
   --with-sysroot=/home/bertrand/x-tools/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot
   --without-mysql --without-postgresql --without-x
   --with-rpltools=/home/bertrand/cvs/rpl/build --with-openssl-arch=linux-generic32
   
       Of course, you have to configure OpenSSL with --with-openssl-arch.
   
   * RPL/2 is known to run on :    * RPL/2 is known to run on :
   
     - Linux (kernel 2.6.26 and above) on i386, amd64, ppc32, sparc32,      - Linux (kernel 2.6.26 and beyond). Test distribution is Debian.
         sparc64, alpha. Test distribution is Debian. Warning, you have to      - Solaris 8 and beyond.
         use NPTL, not LinuxThreads due to a bug in sem_post() that is not  
         async safe.  
     - Solaris 9 and above on i386, amd64, sparc32 (only Solaris 9) and sparc64.  
         It can be built out of the box on Solaris in a 32bits userland. For a          It can be built out of the box on Solaris in a 32bits userland. For a
         64bits executable, you have to modify some generated makefiles or          64bits executable, you have to modify some generated makefiles or
         specify some options. See 64bits on Solaris.          specify some options. See 64bits on Solaris.
     - FreeBSD 7.x on i386. I have installed a FreeBSD 7.0, upgraded to 7.2      - FreeBSD 7.x. I have installed a FreeBSD 7.0, upgraded to 7.2
         and RPL/2 ran without any trouble. RPL/2 does not run on FreeBSD 8.0          and RPL/2 ran without any trouble. RPL/2 does not run on early
         because sig_into_t struct is not filled. Someone has reported that          FreeBSD 8.0 because sig_info_t struct is not filled. This bug is now
         FreeBSD 7.2 did not filled this struct too...          fixed. Someone has reported that FreeBSD 7.2 did not filled this
     - NetBSD 4.0 and above with a restriction. NetBSD's sigpending          struct too...
         is broken and it is impossible to use DETACH intrinsic. Bug report      - NetBSD 5.0 and beyond.
         has been done and this bug should be fixed in next NetBSD release.      - OpenBSD 4.8 and beyond.
         Sigpending has been fixed in NetBSD 5.0 and RPL/2 runs fine.      - Windows with Cygwin (>= 1.7.5).
       - OS/2 and eComStation with EMX (>= 0.9d). You probably have to
           recreate configure script and makefiles with aclocal, autoconf and
           automake.
           ========================================================================
           WARNING : eCS DEFINES TMP VARIABLE THAT OVERWRITES PATHS
           IN FOPEN() SYSTEM CALL. /TMP/xxx IS REPLACED BY /%TMP%/xxx.
           THIS BUG ONLY OCCURS WHEN RPL/2 IS CALLED FROM OS/2 OR 4OS2 SHELL.
           WORKAROUND : DEFINE RPL_TMP_PATH WITH A DRIVE LETTER LIKE
   
   * RPL/2 should run on :              SET RPL_TMP_PATH=C:/tmp
   
     - HP-UX (10.20 and above), but not tested for a long time.          OR CALL RPL/2 FROM A BOURNE SHELL.
     - Linux (2.6.26 and above) on ppc64 and other hardware (arm, hppa...) or          ========================================================================
         with other distributions than Debian.  
     - FreeBSD 7.0 and above on other architecture than i386. Please not  
         that I cannot reproduce sig_info_t bug and I do not have more  
         information.  
     - NetBSD 4.0 and above on other architecture than sparc32 with restriction  
         due to sigpending bug.  
     - Mac OS X.      - Mac OS X.
   
     * RPL/2 should run on :
   
       - AIX
       - HP-UX (10.20 and beyond), but not tested for a long time.
       - NetBSD 4.0 and beyond with restriction due to sigpending bug.
   
     Any information about RPL/2 on these last operating systems are welcome.      Any information about RPL/2 on these last operating systems are welcome.
   
   * RPL/2 is not supported on :    * RPL/2 is not supported on :
   
     - OpenBSD due to a major bug in sigaltstack syscall when a program is  
         linked with -lthread. As this bug comes from OpenBSD libraries,  
         OpenBSD port has to wait for a fixed sigaltstack. RPL/2 uses pselect()  
         that is unavailable too.  
     - OpenVMS (work in progress) on Alpha and Integrity due to some bugs in GNV.      - OpenVMS (work in progress) on Alpha and Integrity due to some bugs in GNV.
         RPL/2 never works on OpenVMS VAX because GNV is too old on this          RPL/2 never works on OpenVMS VAX because GNV is too old on this
         architecture.          architecture.
     - Hurd.      - Hurd because sig_info_t is not filled.
   
   * RPL/2 shall never be supported on :    * RPL/2 shall never be supported on :
   
     - Cygwin due to some troubles between Cygwin Posix subsystem and Windows.      - Windows (all versions) without Cygwin.
         You can try, but I shall never support Cygwin. If someone proposes  
         patches to build RPL/2 on Cygwin, I won't modify official RPL/2 source  
         tree, but only propose these patches against official tarball.  
     - Windows (all versions).  
     - OS/2 and eComStation.  
     - Mac OS preX.      - Mac OS preX.
   
     Tools directory contains some libraries that are normally provided by      Tools directory contains some libraries that are normally provided by
Line 128  rpl: ELF 64-bit MSB executable SPARCV9 V Line 140  rpl: ELF 64-bit MSB executable SPARCV9 V
   
     Very easy^Wnice, isn't it ?      Very easy^Wnice, isn't it ?
   
     * OS/2 and eComstation
   
       GSL configure script is broken. You have to replace
       $(SHELL) $(top_buildir)/libtool by sh $(top_buildir)/libtool in each
       Makefile. By default, makefile's try to use ash.exe that is broken.
   
     J. Bertrand <joel.bertrand@systella.fr>      J. Bertrand <joel.bertrand@systella.fr>
Removed from v.1.4  
changed lines
  Added in v.1.26

CVSweb interface <joel.bertrand@systella.fr>