1: * Thu Dec 09 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.20 (RPL/2)
2: - regression introduced bt 4.0.19 is fixed in signal management.
3: Interruption1() can be called from itself and raises bus error (on sparc) or
4: segmentation fault;
5: - sqlite is upgraded to 3.7.4;
6: - OpenSSL is upgraded to 1.0.0c;
7: - syntax error is correctly checked ( (2+,0) does not crash RPL/2 anymore);
8: - characters are tested in recherche_type() to avoid names like '12+';
9: - sqlite is upgraded to 3.7.3;
10: - gnuplot is upgraded to 4.4.2 due to major bugs.
11: * Thu Sep 23 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.19 (RPL/2)
12: - due to a very strange bug I've only seen on Solaris, ptmalloc3 is removed.
13: Solaris libresolv randomly uses ptmalloc3 and system allocator and makes heap
14: corruption. As internal memory management have been improved, a best fit
15: allocator like ptmalloc3 is not required anymore;
16: - gnuplot is upgraded to 4.4.1;
17: - deadlock is fixed in signal handlers: same mutex was used in standard
18: subroutines (without protected sections by sigprocmask() or pthread_sigmask())
19: and signal handlers. A new signal handler specific mutex is added;
20: - minor bug is fixed in evaluation() subroutine. In { X 0 PI }, PI is a function
21: that has to be evaluated by ->NUM;
22: - rplfile build process is modify to be sure that rplfile is not modified
23: after rpl build stage (to be sure that rplfile checksum is not modified after
24: rpl compilation);
25: - AWK is replaced by rplawk. rplawk is original awk written by Brian Kernighan,
26: modified to remove yacc code and renamed;
27: - some workarounds have been written to not use buggy klibc SystemV IPCS.
28: ABORT now works on eComStation;
29: - sqlite is upgraded to 3.7.2;
30: - bug is fixed in software interrupts. When both process have different PID,
31: parent process was not interrupted if it is not group master process. To fix
32: this bug, SIGINJECT signal is not sent by child process but by control thread
33: in parent process;
34: - minor bug is fixed in data injection (POKE) that does not work as expected
35: when child process is protected by NRPROC.
36: * Thu Aug 26 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.18 (RPL/2)
37: - --enable-sysv-sems is added to configure script to use SystemV semaphores
38: functions instead of POSIX functions. This function is disabled or forced on
39: systems that does not provide correct POSIX or SysV semaphores subsystem;
40: - a dirty but not quick patch is written to workaround broken siginfo
41: structures. This patch has been successfully tested. It uses a segment of
42: shared memory (Posix or SysV) and some semaphores (Posix or SysV) by process
43: (Unix PID);
44: - some OpenBSD's hacks are added;
45: - broken siginfo->si_pid field is now checked by configure script;
46: - SWI now sends SIGCONT to interrupted process to start interrupt without delay;
47: - random generator is cloned by SPAWN;
48: - in transliteration subroutine : '\r' is added after all '\n' in OS/2 port;
49: - getaddrinfo is hardcoded when host system does not provide getaddrinfo
50: or freeaddrinfo;
51: - RPL/2 can now use SystemV semaphores when POSIX semaphores are unavailable;
52: - major bug is fixed in CHR intrinsic when obtained character is not printable;
53: - Lapack is upgraded to 3.2.2;
54: - OS/2 (eComStation 2.0 with EMX 0.9d) support is added;
55: - TOKENIZE is now able to convert escape sequences;
56: - ATPOKE and CLRATPOKE new intrinsics are added;
57: - --enable-full-static configure flag is added. With this flag, mysql and
58: postgresql libraries are statically linked in rpl executable;
59: - units Makefile is modified to avoid readline and ncurses usages;
60: - sqlite is upgraded to 3.7.0.1;
61: - units is upgraded to 1.88;
62: - another major bug is fixed in the same variable creation subroutine.
63: Level 0 and 1 variables adresses were swapped when a global variable masked
64: a name of RPL/2 routine;
65: - major bug is fixed in global variable creation subroutine. When a global
66: variable was created and when a local variable existed with the same name,
67: computed address of global variable was wrong;
68: - src/Makefile.am is modified to avoid a bug on several systems. libptmalloc3
69: is forced in front of all libraries.
70: * Tue Jul 13 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.17 (RPL/2)
71: - BACKTRACE intrinsic is added;
72: - major bug is fixed in SELECT/DEFAULT/END conditional structure. Only occurs
73: when this structure is included in IFERR/THEN/END structure and when an error is
74: caught;
75: - major bug is fixed in analyse() subroutine. When evaluation() returned error
76: in a compiled program, analyse() caught this error twice and randomly aborted
77: with a segmentation error;
78: - TRIM and TOKENIZE replace both '\n' and '\t' by regular spaces;
79: - ATEXIT subroutine begins with an implicit CSTOP to avoid multiple stop
80: signals;
81: - memory leak is fixed in ROW+. It only occurs when a row is added to an empty
82: matrix.
83: * Thu Jun 24 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.16 (RPL/2)
84: - minor bug is fixed in evaluation() subroutine. With this patch, same program
85: returns same result with or without -p flag;
86: - ncurses 5.7 is upgraded to 20100619;
87: - openssl is upgraded to 1.0.0a;
88: - interrupt stacks are now FIFO instead of LIFO;
89: - debug memory allocation subroutines are improved to run in multithreaded
90: programs;
91: - some memory leaks are fixed in process management (SPAWN and DETACH);
92: - version verification is added to shared objects;
93: - -D_GNU_SOURCE is added to ptmalloc3 makefile to avoid a major bug on 64 bits
94: linux (false mremap() prototype);
95: - major bug is fixed in rpliconv. getc() returns an int, not a unsigned char.
96: * Sun May 23 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.15 (RPL/2)
97: - all '-' are replaced by '_' in random generator list;
98: - minor memory leak is fixed in OPEN intrinsic (socket);
99: - major bug is fixed in IFERR structure. Only occurs in compiled program;
100: - major bug is fixed in copie_objet() and liberation(). Only concerns
101: format in FCH (file descriptor) and SCK (socket descriptor);
102: - debug routines are improved;
103: - PROCID is added;
104: - MEMLOCK and MEMUNLOCK are added. MEMLOCK forces a process to remain in memory
105: and to not use swap;
106: - major bug is fixed in sql support. SQL connections were closed in all chield
107: process;
108: - standard allocator (malloc()/free()) is replaced by ptmalloc3 due to some bugs
109: discovered in Solaris thread safe allocators (libmalloc and libumem) that
110: are first fit class allocators. Solaris libmtmalloc works better and is
111: a best fit class allocator but its performance is poor than ptmalloc3
112: performance;
113: - major bug is fixed in ROW+ intrinsic (new row was not added where it
114: should);
115: - minor bugs are fixed in interruptions.c (semaphores values when error is
116: caught);
117: - major bug is fixed in STOP intrinsic. STOP was unable to stop any process
118: created by SPAWN;
119: - SIGFABORT is added. When process receives SIGFSTOP, it tries to execute
120: ATEXIT. If it receives SIGFABORT, it does not;
121: - ONEXIT is renamed in ATEXIT;
122: - ONEXIT new intrinsic is added.
123: * Wed Apr 21 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.14 (RPL/2)
124: - major bug is fixed in static and shared variables initialization subroutine.
125: This bug only occurs when RPL/2 tries to create a shared or static variable
126: from an expression;
127: - major bug is fixed in copie_etat_processus(). A field that contains
128: information about shared variable was not copied to new processus structure;
129: - some little memory leaks are fixed in evaluation(), recherche_type() and
130: sequenceur(). They only occured when syntax error were caught;
131: - IMPLICIT causes execution error instead system error;
132: - Hurd support is improved but currently broken because Hurd does not support
133: SIG_INFO. Work in progress;
134: - OpenBSD specific support is removed from sources;
135: - support for Mac OS X and Windows/Cygwin is added.
136: * Wed Apr 07 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.13 (RPL/2)
137: - implicit names can now be disabled by new IMPLICIT intrinsic:
138: cauchy:[~/cvs/test] > cat implicit.rpl
139: #!/usr/local/bin/rpl -sp
140: TEST
141: <<
142: "none" implicit
143:
144: 1 -> Z
145: <<
146: Z disp
147: 'Z' disp
148: >>
149:
150: 'Z' disp
151: Z disp // Undefined
152: >>
153:
154: cauchy:[~/cvs/test] > LANG=C ./implicit.rpl
155: +++RPL/2 (R) version 4.0.13 (Wednesday 04/07/10, 13:57:44 CEST)
156: +++Copyright (C) 1989 to 2009, 2010 BERTRAND Joel
157: 1
158: 'Z'
159: 'Z'
160: +++System : Invalid implicit name [6631]
161: cauchy:[~/cvs/test] >
162:
163: RPL/2 aborts because the last Z is undefined and not protected by ''.
164: By default, implicit is set to "ALL";
165: - sqlite is upgraded to 3.6.23.1;
166: - openssl is upgraded to 1.0.0;
167: - major bug is fixed in RETURN intrinsic. It only occurs in evaluation
168: subroutine;
169: - table variable can now be sorted by SORT;
170: - some regressions between libtool 1.x and 2.x are fixed by workarouds in
171: Makefiles;
172: - -a command line option analyzes program (structure and syntax) and
173: sends preprocessor output to standard output. This option is used by
174: rplc (RPL/2 compiler).
175: * Tue Mar 09 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.12 (RPL/2)
176: - in formatted file, string format returned a variable length string even if
177: format was 'CHARACTER*(n)' (n characters string). Now, 'CHARACTER*(*)' returns
178: a variable length string and 'CHARACTER*(n)' a fixed length string;
179: - keyed access files support is added. Currently, only formatted files are
180: supported;
181: - direct access files support is added. Currenlty, these files can only be used
182: in formatted mode;
183: - virtual variables are now writte in UTF-8 and all special characters
184: in string are escaped;
185: - all formatted files are now converted into UTF-8;
186: - all file and unix socket names created by RPL/2 are now UTF-8 compliant;
187: - RPL/2 tools (rpliconv, rplfile, rplpp and rplconvert) are now checked before
188: each execution (md5 and sha1 sums) to enhance security. If one of these tools
189: have been modified between RPL/2 compilation and current execution, RPL/2 aborts
190: on a non recoverable system error;
191: - openssl and sqlite3 libraries are added;
192: - RPL_HOME env variable is added. When RPL/2 is called from librpl, this
193: variable indicates RPL/2 root directory. If it is not set, root path
194: is given by configure script (d_exec_path);
195: * Thu Mar 03 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.11 (RPL/2)
196: - configure.in and makefile.am's are modified to add Cygwin support. Interix
197: support is broken;
198: - memory leak is fixed in recherche_type();
199: - TeX files are now written in UTF-8 even default locale differs;
200: - minor bug is fixed in ->STR (escaped characters);
201: - minor bug is fixed in ->Q intrinsic. Resultat is returned as integer
202: fraction intead real one;
203: - SIGN now returns (0,0) instead (nan,nan) when complex argument is null;
204: - Makefile.am are modified to authorize parallel builds;
205: - minor bug is fixed in CR intrinsic. CR sends a carriage return to printer
206: and writes warning to standard output;
207: * Wed Feb 10 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.10 (RPL/2)
208: - escape codes are now converted in formateur(), not in recherche_type() to
209: avoid a minor bug in EDIT and VISIT intrinsics;
210: - minor bug is fixed in formateur_reel();
211: - file-5.03 is patched to avoid bus error on systems that require memory
212: alignment;
213: - minor bug is fixed in evaluation(). Error returned by RPL/C external functions
214: were able to be avoided by evaluation routine.
215: * Tue Jan 26 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.9 (RPL/2)
216: - New benchmark on same hardware than old one :
217: cauchy:[~/rpl/bench] > ./bench.rpl
218: +++RPL/2 (R) version 4.0.9 (samedi 23/01/2010, 18:06:08 CET)
219: +++Copyright (C) 1989 à 2009, 2010 BERTRAND Joël
220: Number of scalar operations per second and per core : 2383016
221:
222: - PULPRFL does not abort on BUG() but on execution error;
223: - TRIM, REPL and TOKENIZE are added;
224: - sockets options are now set before bind();
225: - shutdown() is added to all connected sockets;
226: - minor bug is fixed in SUB intrinsic (segfault when SUB is called with
227: list argument and inexistant elements).
228: * Fri Jan 08 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.8 (RPL/2)
229: - minor bug is fixed in DAEMON intrinsic. When a program was daemonized, all
230: signals sent to main process were not caught because DAEMON did not replace
231: old pid by new one;
232: - major bug is fixed in IFERR/THEN/ELSE/END. Only occurs in expression
233: evaluation when an error is reported from a subroutine in another subroutine.
234: For example, error was not caught in following program when it is executed with
235: -p option :
236: TEST << iferr TEST2 then end >>
237: TEST2 << 0 inv >>
238: - major bug is fixed in variable management. Some local variables were
239: seen as global ones;
240: - major bug is fixed in rplcore. Rplcore entered in dead lock when
241: script file contains a multibyte character;
242: - IN intrinsic is added;
243: - major bug is fixed in SAME intrinsic : << 1 >> DUP SAME and 'E' DUP SAME
244: returned false ;
245: - major bug is fixed in RETURN intrinsic. It only occurs in compiled
246: programs;
247: - major bug is fixed in NEG intrinsic. NEG did not make a copy of its arguments;
248: - regression is fixed in compilation(). "\\" was analysed as '"' '\' '\"' and
249: strings were never closed;
250: - some bugs have been fixed in file management;
251: - RPL/2 can now be run on EBCDIC systems (OS/390);
252: - major bug is fixed in -A command line option (NULL character is missing);
253: - minor bug is fixed in rpliconv and RECODE intrinsic. All transliterations are
254: made by blocks (1024 bytes). When an incomplete multibyte sequence is
255: encountered at end of block, subroutine aborts with an execution error;
256: - major bug is fixed in OPEN (TCP/IPv4 sockets).
257: * Mon Nov 30 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.7 (RPL/2)
258: - DISP now locks stdout;
259: - rpliconv is added to replace standard iconv provided by operating system.
260: Indeed, conversion between different encodages requires transliteration
261: that is not offered by some iconv utility;
262: - CURRENC and RECODE intrinsics have been written to allow strings conversions;
263: - bug is fixed in SYSEVAL. When execvp() returns (for example when arg[0] can
264: not be found), SYSEVAL enters in a dead lock;
265: - fprintf is replaced by some functions that allow transliterations between
266: locales;
267: - '"' can now be used in strings ("\"");
268: - iconv is called with -c in preprocessor stage. It is done to write
269: CGI scripts with RPL/2 because locale charset is set to ANSI_X3.4-1968;
270: - double free is fixed in liberation() (type SQL, only occurs when locale is
271: set);
272: - LOCALIZATION, UCASE and LCASE are added;
273: - major bug is fixed in EXIT intrinsic that was able to return a false
274: execution error in compiled scripts (only in DO/UNTIL and REPEAT/WHILE loops);
275: - major bug is fixed in wrapper_instruction_intrinseque(). When intrinsic() was
276: used in onLoading from shared library, USE was pushed on stack as algebraic
277: expression;
278: - libiconv is upgraded to 1.13.1;
279: - gnuplot is upgraded to 4.2.6;
280: - gsl is upgraded to 1.13.
281: * Mon Sep 28 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.6 (RPL/2)
282: - pipe() is overwritten by a macro to avoid a system error. Communication
283: between process are done with pipes and these pipes are managed by a
284: specific asynchrone thread. If a script try to create more threads than
285: management thread can destroy, you can quickly achieve maximum number of
286: opened files and pipe() shall return a system error. This macro tries to create
287: pipes. If pipe() function returns an error, macro waits and retries. If
288: number of retries is greater than a hardcoded value, macro returns an error;
289: - major bug (deadlock) is fixed in process and thread management. I hope
290: this bug shall be the last one;
291: - major bug is fixed in DET intrinsic (determinant was computed without LU
292: diagonalization);
293: - SWAPCNTXT is added;
294: - minor bug is fixed in Makefile.am (licences rule).
295: * Wed Sep 09 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.5 (RPL/2)
296: - some bugfixes are added in process management;
297: - all process management is rewritten to avoid usage of defunct process
298: or thread number;
299: - new major bug is fixed in interruptions.c. Sometimes, when retrait_thread()
300: was called before a pending interruption5 (SIGFSTOP), signal handler uses
301: a freed semaphore and corrupts heap;
302: - CLRERR is added to erase previous errors;
303: - ERRN and ERRM return exception message and number;
304: - major bug is fixed in interruptions.c. All signal are now bufferised
305: when semaphore_liste_threads is null to avoid deadlock. This bug only
306: occured when STOP was sent to a dying thread or process (when this thread or
307: process was running retrait_thread());
308: - matrix rank is computed before matrix inversion;
309: - file locks are added to stdin and stdout. stderr is not locked because
310: all messages written by signal handlers are sent to stderr;
311: - configure.in script is modified to test gcc version and avoid a bug in
312: gcc older than 4.4;
313: - some benchmarks have been done :
314:
315: cauchy:[~/rpl/bench] > ./bench.rpl
316: +++RPL/2 (R) version 4.0.5 (mardi 04/08/2009, 18:23:07 CEST)
317: +++Copyright (C) 1989 à 2008, 2009 BERTRAND Joël
318: Number of scalar operations per second and per core : 2109867
319:
320: Workstation :
321: cauchy:[~/rpl/build] > uname -a
322: Linux cauchy 2.6.30.1 #1 SMP PREEMPT Thu Jul 16 09:49:46 2009 x86_64 GNU/Linux
323: cauchy:[~/rpl/build] > cat /proc/cpuinfo | grep "model name"
324: model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
325: model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
326: cauchy:[~/rpl/build] > gfortran -v 2>&1 | grep "gcc version"
327: gcc version 4.3.3 (Debian 4.3.3-14)
328: cauchy:[~/rpl/build] >
329:
330: - SVL and SVD are added;
331: - COND and RANK are added;
332: - DIAG-> and ->DIAG are added;
333: - major bug is fixed in DET intrinsic. DET is rewritten to avoid usage of
334: eigenvalues. In a first time, matrix rank is estimated to force determinant
335: to zero if matrix is rank deficient. If not, a PLU decomposition is done to
336: compute determinant;
337: - QR matrix decomposition is added;
338: - LQ matrix decomposition is added;
339: - Fortran90 files are rewritten to use Fortran2003 bind(C) statement and
340: Fortran preprocessor;
341: - default compilation options are now -Wall -Wextra -Wno-pointer-sign
342: -Wno-unused-parameter;
343: - all mathematical exceptions are now signaled by exceptions instead of
344: execution error;
345: - minor bug is fixed in both CSTOP and RSTOP intrinsics. Without this fix, you
346: can call twice CSTOP without RSTOP;
347: - named semaphore support is added (CRSMPHR, CLRSMPHR, SMHRDECR, SMPHRINCR,
348: SMPHRTRYDECR, SMPHGETV).
349: * Fri Jul 24 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.4 (RPL/2)
350: - semaphore is added in interruptions.c to avoid segmentation fault when STOP
351: signal is sent to a dying thread. Some mutexes are replaced by semaphores too
352: to be used in signal handlers;
353: - major bug (memory corruption) is fixed in COL- intrinsic;
354: - minor bug is fixed in ALARM and WAIT. These temporisations stopped when a
355: software interrupt was caught;
356: - rplpp man page is added.
357: * Fri Jul 17 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.3 (RPL/2)
358: - minor bug is fixed in WRITE (SIGPIPE is ignored to catch error without
359: process termination);
360: - major bug is fixed in FUSE intrinsic (FUSE kills itself and do not kill
361: its parent);
362: - a mutex to protect fork() syscall is added;
363: - all mutexes are unlocked after fork() in DETACH;
364: - minor bug (double free corruption) is fixed in CLOSE intrinsic;
365: - major bug is fixed in lecture_pipe when a nullified list is sent into a pipe;
366: - WORKDIR intrinsic is added;
367: - Level 0 variables are shared between all threads without copy. Indeed,
368: there variables are not modifiable and only contains static user definitions;
369: - branches prediction is added in THEN, ELSE, ELSEIF and REPEAT intrinsics;
370: - FORTRAN 77 file management subroutines are rewritten in pure C due to
371: FORTRAN string management. C/FORTRAN 77 string interfaces are broken
372: in some cases (gcc/gfortran/libc/OS and arch conjonction);
373: - a memory leak is fixed in REMOVE intrinsic;
374: - major bug is fixed in MySQL driver (segfault due to a bug in mysql_init()
375: and due to a libmysqlclient that is not thread safe).
376: * Wen Jun 10 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.2 (RPL/2)
377: - new enhanced allocator is written for regular variables, static variables and
378: shared variables;
379: - major bug is fixed in src/interruptions.c. This file did not compile
380: when SQL support was not enabled;
381: - new allocator is written for system stack and last stack;
382: - --enable-profile flag is added to configure script. When this flag is
383: enabled, rpl is built with -pg option;
384: - SIGFSTP (from Solaris'TERMIO) is caught. On Solaris 10, all process receive
385: SIGFSTP (with a nullified siginfo structure) instead of SIGHUP when control
386: process is killed;
387: - abs() macro is modified to avoid multiple evaluation. Your C compiler has to
388: know typeof() intrinsic function. This function is not standard but exists
389: under Sun Studio, gcc, and maybe some others compilers. If this function does
390: not exist on your compiler, you can change its definition by old one in
391: src/rpl.h;
392: - fflush() can now be interrupted by signal (SunOS);
393: - fflush(NULL) is called before all fork() occurrences;
394: - generators returned by RDGN help are sorted;
395: - Lapack is now 3.2.1.
396: * Mon May 18 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.1 (RPL/2)
397: - bug is fixed in src/generateurs_aleatoires.awk. It only occurs when RPL/2 is
398: built under Solaris.
399: * Wed May 5 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0 (RPL/2)
400: - major bug is fixed in matrix inversion (due to an inversion between pointer
401: and object copies);
402: - RDGN is added to use some different random number generators. See HELP RDGN;
403: - code analysis is rewritten from scratch to be more efficient and mode
404: expandable;
405: - minor bug (segfault in interruption1) is fixed. It only occurs on Solaris
406: that can returns a nullified siginfo pointer when SIGINT is sent by kernel
407: keyboard driver;
408: - gnuplot is now 4.2.5;
409: - readline is upgraded to 6.0;
410: - file is upgraded to 5.0;
411: - Signal handlers are rewritten to send signal to main thread when a signal
412: is send from an external process;
413: - configure.in is modified to avoid a libc bug on Solaris (free() can enter in
414: deadlock when a huge amount of threads is launched);
415: - minor bug is fixed in boath START and FOR intrinsic. Only occurs when
416: arguments types are unsupported;
417: - PLOT instrinsic is added (usage: LINE and MARK do not draw anything. All
418: data are buffered. PLOT is used to draw these objects.);
419: - MARK instrinsic is added;
420: - new allocator mechanism is written;
421: - some regression bugs have been fixed, some memory leaks too.
422: * Wed Jan 28 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.9 (RPL/2)
423: - an estimation of future stack elements is added to avoid some costly memory
424: allocations. This function has a positive impact on execution speed;
425: - PSHPRFL and PULPRFL have been added;
426: - RPL/2 can be built on Solaris 64 bits with some minor scripts alterations.
427: See README for more explanations;
428: - MTXSTATUS intrinsic is added;
429: - YIELD intrinsic is added;
430: - ERRM is fixed. In some cases, ERRM uses some uninitialized pointers;
431: - SHARED and PRIVATE intrinsics have been added. A shared variable is a
432: static variable that is shared by multiple threads;
433: - '->' intrinsic is improved. All object copies have been avoided;
434: - -n flag is added to catch HUP signal. stderr and stdout are redirected
435: to a file, stdin is redirected to /dev/null when control process is killed;
436: - a mutex is added to each object (before this modification,
437: RPL/2 used a global mutex and performances in multithreaded programs were very
438: poor.);
439: - ALARM is now interruptible;
440: - both PUT and PUTI intrinsics are improved and do not copy list and table
441: when nombre_occurrences == 1;
442: - COPY intrinsic is added. Argument (that can be pointed from some objects)
443: is replaced by a new copy of itself;
444: - memory leak is fixed in sequenceur(). It only occurs when an execution error
445: is caught from interactive mode;
446: - mutexes have been added (CRMTX, CLRMTX, MTXLOCK, MTXUNLOCK);
447: - new mutex type is added;
448: - profile statistics have been added. See -P option;
449: - major bug is fixed in analyse_syntaxique();
450: - new SQL type is added;
451: - due to a trouble in libpq in multithreaded context, SQL intrinsic is split
452: in three new intrinsics : SQLCONNECT, SQLQUERY and SQLDISCONNECT. Please note
453: that all programs that worked with old SQL intrinsic can now work with
454: SQLQUERY. With all new programs, you can open a real connection to databases;
455: - NRPROC is added. This new intrinsic is used to catch error from child
456: process. Without NRPROC, any errors returned by child process cause
457: main process to abort;
458: - SPAWN is added. This new intrinsic is used to launch a new thread (DETACH
459: starts a new process). There are no mutexes in RPL/2 because all spawned process
460: use specific context. Nevertheless, shared variables and associated mutexes
461: should be added;
462: - -D flag and DAEMONIZE intrinsic have been added;
463: - REPEAT, THEN, ELSE and ELSEIF intrinsics are rewritten to be more efficient;
464: - autoconf script is modified to handle mysql and postgresql on non standard
465: directories;
466: - -t flag is fixed ('\0' is missing...);
467: - SWI and SEND pipes have been modified to be more robust on systems where
468: getpid() can return (pid_t) -1 or (pid_t) -2 value;
469: - major bug is fixed in REPEAT intrinsic. Only occurs in compiled mode;
470: - all but jump variables are removed from source. All signal handlers now
471: use encapsulated variables and signals are caught by thread;
472: - major bug is discovered in ->LCD. Both LCD-> and ->LCD have been fixed;
473: - NEWPLANE is added;
474: - LINE is added;
475: - DGTIZ is added;
476: - major bug is fixed in ROW-> intrinsic (comes from new garbage collector);
477: - lot of multiprocessing related bugs have been fixed; That was a huge work but
478: it's done. Data integrity is now respected during transmission (POKE, SEND and
479: SWI);
480: - ITRACE is added. This intrinsic is only used to debug internal structures and
481: should not be used in regular programs;
482: - SWISTATUS is written;
483: - WFACK is written;
484: - rplcore files are now able to handle compilation errors;
485: - rplcore files are now able to handle evaluation and interruption errors;
486: - SORT can now be used on table;
487: - tables can now be sent by POKE and SEND instrinsics;
488: - software interrupts do not inherit IFERR controls;
489: - LOGGER intrinsic is added;
490: - All WF* intrinsics but WFSOCK are made interruptible;
491: - ISWI intrinsic is added. Current interrupt is marked as 'interruptible';
492: - tables can be used with SAME intrinsic;
493: - minor bug is fixed in recherche_variable(). Only occurs when an error
494: is caught;
495: - external functions can now be used in expressions;
496: - major bug (deadlock) is fixed in WFPOKE intrinsic;
497: - some mistakes have been fixed under Solaris;
498: - major bug is fixed in RETURN intrinsic (only occurs when evaluation and
499: program modes are mixed);
500: - major bug (dead lock) is fixed in gestion_processus.c;
501: - major bug is fixed in WFPROC;
502: - rplc, rpllink and mkrplso manpages are added;
503: - rpltags tool and manpage are added;
504: - WFLOCK is fixed;
505: - RPL/2 kills now all process on error;
506: - major bug (segfault) is fixed in REMOVE intrinsic.
507: * Mon Jul 28 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.8 (RPL/2)
508: - configure script is modified to check mysql and postgresql libraries
509: on all standard locations. Tested and works on FreeBSD, Solaris and Linux
510: Debian;
511: - Tables are allowed in eval ( <[ 1 ]> 't' sto 't(1)' eval );
512: - ->TABLE and TABLE-> intrinsics are added;
513: - major bug is fixed in recherche_type(). Only occurs when rpl executes
514: precompiled scripts;
515: - new type is added: table with <[ ]> delimiters:
516: RPL/2> { 2 3 2 } crtab
517:
518: 1: <[ <[ <[ { }
519: { } ]>
520: <[ { }
521: { } ]>
522: <[ { }
523: { } ]> ]>
524: <[ <[ { }
525: { } ]>
526: <[ { }
527: { } ]>
528: <[ { }
529: { } ]> ]> ]>
530:
531: CRTAB new intrinsic creates a regular table. By default, all elements are
532: nullified lists;
533: - rplexternals.h is modified and improved;
534: - GNU File (renamed as rplfile) cannot be built due to a bug in libtoolize and
535: configure script.
536: * Mon Jun 23 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.7 (RPL/2)
537: - libiconv is added (iconv library exists on some systems but implemantations
538: differ and RPL/2 can crash);
539: - --enable-encoding is added to configure script to force system encoding.
540: Enconding detection does not work on OpenBSD;
541: - internal file utility is shipped and used to avoid xBSD file mistakes;
542: - GSL 1.11 and gnuplot 4.2.3 are now used;
543: - src/Makefile.am is modified to built RPL/2 ons Solaris 10/sparc;
544: - all but user's messages are written on stderr;
545: - DUPCNTXT and DROPCNTXT are added to handle more efficiently contexts;
546: - SCHED is added. Whit SCHED, you can limit CPU ressource by RPL/2 process;
547: - FUSE, RFUSE and CLRFUSE have been added;
548: - new bug discovered on NetBSD. sigpending() does not return any signal, thus
549: DETACH intrinsic enters in a definitive dead lock. I have no idea to write a
550: workaround for this major bug. Nevertheless, all others capabilities seems to
551: work fine;
552: - '->' is modified to return error when program tries to initialiaze two
553: variables with the same name like
554: 1 0 -> I I << ... >>;
555: - CSTOP and RSTOP have been added (catch and release stop signal);
556: - CONTINUE is added to continue a pending process halted by SUSPEND;
557: - SUSPEND is modified to be stopped by SIGFSTOP;
558: - src/Makefile.am is modified to avoid //TRANSLIT flag on systems that don't
559: support GNU iconv;
560: - configure.in script is modified to avoid bugs when --with-postgresql and
561: --with-mysql are specified;
562: - TRNC is written;
563: - minor bug is fixed in both IFT and IFTE. Returned expression has to be
564: evaluated.
565: * Fri Apr 11 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.6 (RPL/2)
566: - SIGPIPE signal handler is modified to avoid abort process when POKE tries
567: to write data into a pipe without reader;
568: - major bug is fixed in RETURN intrinsic. When RETURN was called from a detached
569: process without -p modifier, it can send an ABORT signal instead a KILL one;
570: - PEEK, POKE and WFPOKE new intrinsics are written;
571: - major bug due to new garbage collector is fixed in rplexternals.h (double free
572: corruption);
573: - CLRCNTXT is added (clear contexts);
574: - VERIFY intrinsic is written;
575: - PSHCNTXT and PULCNTXT are added (PSHCNTXT pushes context on an
576: internal contexts stack, PULCNTXT pulls contexts from this internal stack).
577: Main usages of these intrinsics are in conjonction with IFERR or with
578: software interrupts;
579: - HEAD, TAIL and REVLIST intrinsics are added;
580: - function pointers have been added to function description;
581: - new analyse() routine is written. All instrinsics are now in a N-tree;
582: - software interrupts have been fixed;
583: - multitasking capabilities have been modified to be usable on NetBSD. All real
584: time signals have been removed;
585: - major bugs are fixed in multitasking (mutex trouble _and_ segmentation fault);
586: - minor bug is fixed in STR->. STR-> could return a system error instead an
587: execution one;
588: - first bug due to new garbage collector is fixed in '+' ({ } { } +) and in
589: '-' intrinsics;
590: - PostgreSQL support is written.
591: * Mon Mar 17 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.5 (RPL/2)
592: - locale can now be specified in SQL intrinsic :
593: { "mysql:iso-8859-1" "server" "database" ... };
594: - major bug is fixed un analyse_algebrique(). When DISP printed an algebraic
595: object, 'DISP()' was pushed in stack;
596: - same major bug is fixed in <, >, <=, >= and <>;
597: - major bug fixed in formateur() (segfault when a symbol is used without "'");
598: - major bug is fixed in DUPN intrinsic;
599: - when software interrupt (SWI) is evaluated, SWI pushs process id on stack
600: before starting interrupt evaluation;
601: - -f parameter is added when iconv is called;
602: - as old file program was bugged, a new option is added to configure script.
603: When configure is called with --disable-encoding-autodetection, make does not
604: try to detect source encoding. Please, do not use if RPL/2 can be built
605: without this option !
606: - new garbage collector (and more efficient) is written;
607: - configure script is modified to be usable on NetBSD 4.0, but as NetBSD does
608: not support real time signals, RPL/2 cannot use multitasking functions;
609: - error returned by preprocessor are now catched by RPL/2;
610: - -p option is added. With this option, all scripts are compiled before
611: RPL/2 starts evaluation. HALT cannot be used with -p, but all programs run
612: 40% faster;
613: - read and write operations in pipe() are rewritten to be sure that such
614: operations are atomic;
615: - minor bug is fixed in LOGSCALE. With {} LOGSCALE, all scales have to be
616: linear;
617: - major bug is fixed in gestion_processus.c (some pipes were not closed).
618: * Sat Jan 5 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.4 (RPL/2)
619: - major bugs have been fixed in software interrupt management.
620: * Fri Jan 4 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.3 (RPL/2)
621: - JDATE and RDATE are written;
622: - minor bug (segfault) is fixed in EXSUB. It only occurs when EXSUB is executed
623: with wrong arguments;
624: - KILL now kills current process, ABORT kills program;
625: - software interrupts support is added (SWI, WFSWI, SWILOCK, SWIUNLOCK,
626: SWIQUEUE, STOSWI, RCLSWI, CLRSWI);
627: - major bug is fixed in SQL intrinsic (argument types);
628: - system stack is now written in core file;
629: - ALARM is added;
630: - nanosleep() now replaces sleep() and usleep() system calls;
631: - _GNU_SOURCE is added to rpl.h.
632: * Fri Nov 30 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.2 (RPL/2)
633: - License is changed. Now RPL/2 license is CeCILL (GPL compliant);
634: - EXGET adn EXSUB are added;
635: - minor bug is fixed in recherche_type(). { << } has to return an error.
636: '<<' and '>>' are both functions _and_ delimiters. Thus { IF } is
637: acceptable, but { >> } isn't;
638: - GSL is now 1.10, gnuplot 4.2.2 and units 1.87;
639: - OBGET and OBSUB intrinsics are added;
640: - src/Makefile.am minor bug is fixed (make clean deleted src/rpl.xpm);
641: - WAIT intrinsic is modified to use sleep() and usleep() if delay is
642: greater than one second. On some systems, usleep argument must be lower
643: than 1E6;
644: - numeric and character formats are now tested;
645: - -A flag is added. -A is used to give command line parameters to main
646: routine. Example:
647: rayleigh:[~/rpl-4.0.0.prerelease.2/examples] > ./test3.rpl -A "<< X sin >>"
648: +++RPL/2 version 4.0.0.prerelease.2 (vendredi 05.10.2007, 19:03:01 CEST)
649: +++Copyright (C) 1989 à 2006, 2007 BERTRAND Joël
650: << 'X' SIN >>
651: rayleigh:[~/rpl-4.0.0.prerelease.2/examples] > cat test3.rpl
652: #!/usr/local/bin/rpl -s
653:
654: TEST
655: <<
656: disp
657: >>
658: - minor bug (segfault) is fixed in encart() routine (splash screen). Child
659: process ended with segfault due to a mistake in Motif widget cleaning
660: process;
661: - major bug is fixed in DETACH intrinsic. Child process were locked when
662: they were started with a locked mutex that comes from its father;
663: - ctrl+C can now kill all child process;
664: - WFPROC and WFDATA are rewritten;
665: - RETURN is fixed to be usable in detached process;
666: - HALT is not exported to child process;
667: - FLOW filetype is added;
668: - Makefiles are modified to support gcc-4.2 and gfortran-4.2;
669: - socket support (Unix, IPv4, IPv6, STREAM, DATAGRAM, ROBUST DATAGRAM,
670: SEQUENTIAL DATAGRAM, RAW) is added. Warning: IPv6 sockets have not been tested
671: because I don't have any IPv6 compliant server, but they should work.
672: * Mon Sep 10 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.1 (RPL/2)
673: - library management is rewritten from scratch. EXTERNAL is removed and
674: EXTERNALS is added. Now, all exported symbols are sent to RPL/2 when
675: library is loaded;
676: - OPEN arguments are changed;
677: - EXTERNAL now checks availability of external functions;
678: - number of arguments is verified in analyse_algebrique().
679: 'SIN(A+X,2)' is now refused because SIN requires only one argument;
680: - all but lapack symbols are exported from librpl with librpl, f77 or f90
681: prefix;
682: - minor bug is fixed in formateur() (AND and OR requires parenthesis);
683: - rplexternals.h header file is added; Now, it is very easy to write
684: external functions;
685: - memory leak is fixed in analyse_algebrique();
686: - minor bug (symbole flag) is fixed in sequenceur.c and types.c;
687: - temp file was not removed when an error occurs in EDIT or VISIT;
688: - 'name' should not returned a function ("FCT" object);
689: - -rdynamic is added to src/Makefile.am.
690: * Mon Jul 23 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.0 (RPL/2)
691: - Major bug is fixed in interface_tex.c. When there are errors in latex
692: file, latex command waits for input on its command line;
693: - major bug is fixed in tex.h (multiline strings);
694: - examples subdir is added;
695: - major bug is fixed in recherche_variable(). When an expression is evaluated
696: in a function, all variables set in this function must be visible in
697: expression. Thus, << I -> 3 << << I >> eval >> must return 3, not 'I';
698: - LAST stack is saved in rplcore;
699: - major bug is fixed in ->HMS. It only occurs when argument type is not
700: integer or real;
701: - major bug (segfault) is fixed when rpl is called with empty file;
702: - libtool support is removed. Two new scripts (rplc and rpllink) are provided
703: to use librpl.a;
704: - automake scripts are rewritten to avoid a misconfiguration of librpl.a
705: when -j make option is used;
706: - trace output now contains PID;
707: - rpl-core is renamed in rpl-code-$PID;
708: - rplc and rpllink scripts can now sompile and build C and Fortran
709: executables with librpl.a;
710: - New classification, only a working simplification() routine is
711: required to announce 4.0.0.final;
712: - librpl entry point is modified to return results as strings array;
713: - -S option is added;
714: - due to a major bug in libtool, libtool is removed from autoconf/automake
715: scripts;
716: - VERSION is modified to return a list.
717: * Tue Jul 17 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8x (RPL/2)
718: - major regression bug is fixed in PRINT due to mistake in latex pathes;
719: - gnuplot does not have to be built if --disable-embedded-gnuplot is set;
720: - new prompt ("RPL/2> ") is used for interactive mode;
721: - ARCCOS, ARCSIN, ARCTG, ARGCH, ARGSH, ARGTH, CH, SH, TH and TG intrinsics
722: are removed, because all of these intrinsics have two forms. ARCCOS is
723: the same than ACOS, TAN=TG, COSH=CH. Please adapt your scripts;
724: - gnuplot compilation does not have to be done when disable-gnuplot is set;
725: - major bug is fixed in RECV that avoid usage of multitasking.
726: * Tue Jul 10 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8w (RPL/2)
727: - False error (system error) was reported by recherche_type();
728: - recherche_type() returns syntax error if a list is included in
729: an algebraic expression;
730: - --enable-debug is modified. Now, return can be defined to print
731: on stdout its position in source code (line and function);
732: - minor bug is fixed in recherche_type(). Don't forget that space
733: are not significant in algebraic expression:
734: '12 3+ 12 X' is the same expression than '123+12X';
735: - src/Makefile.am is modified to avoid double compilation process;
736: - --enable-final-run-path is added to configure.in script;
737: - STATIC is modified to declare static variables in expression. Warning: static
738: variables used in expressions are deleted when evaluation of this expression
739: ends;
740: - MEM does not report static variable sizes;
741: - minor bug is fixed in HELP intrinsic. When the last instruction was not
742: known, HELP function was pushed in operational stack. HELP did not work
743: when there were space on input line.
744: * Mon May 28 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8v (RPL/2)
745: - DATE is modified: reduced julian days is replaced by fraction part
746: of julian days. Old field used by julian days is now integer part of julian
747: days;
748: - CONVERT intrinsic is rewritten to accept absolute path in popen;
749: - automake scripts are modified to delete src/lock file if build process aborts;
750: - rplargs.h directly includes rpl.h;
751: - absolute pathes are added to all external program files (rplplot, rplpp...);
752: - intrinsic functions are case sensitive. External functions are case
753: unsensitive. A minor bug is fixed in recherche_type() because all external
754: functions were case unsensitive when they were evaluated from RPN expressions;
755: - HELP function is rewritten to be more friendly (a la OpenVMS);
756: - external wrapper (rplplot) is written to force usage of gnuplot provided
757: by RPL/2 if it is built during build process. If this build does not exist,
758: it tries to launch regular gnuplot;
759: - gnuplot is added to source tree to avoid some trouble between preinstalled
760: gnuplot and release used by RPL/2. This addition to source tree is
761: required by some incompatibility between gnuplot releases;
762: - Lapack is upgraded to 3.1.1 release;
763: - GSL is upgraded to 1.9 revision;
764: - RPL_TMP_PATH env variable is added to specify the path of tempfiles. If
765: it is not set, /tmp is used. If /tmp is not writable, /var/tmp is used. If
766: not, ./ but RPL/2 can hang with a fatal error if this last location is
767: not writable;
768: - major regression is fixed in SYSEVAL intrinsic due to introduction of
769: error scrutation.
770: * Sat Mar 24 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8u (RPL/2)
771: - SYSEVAL is modified to return an error when execvp() syscall cannot
772: execute its arguments;
773: - -hard-float sparc option is remove from mkrplso;
774: - major bug is fixed in SQL intrinsic that hangs when query did not return
775: any values (for exemple INSERT);
776: - escape sequences can be used in SYSEVAL argument like "echo \"string\""
777: SYSEVAL;
778: - graphic and PostScript outputs are now cleared in child process;
779: - locales are now used by preprocessor;
780: - major bug is fixed in impression_tex(). PRINT did not work due to a bug
781: introduced by multitasking code;
782: - SORT can now use name as its argument.
783: * Sun Jan 21 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8t (RPL/2)
784: - Variable management has been rewritten and some tests have been done. Now,
785: it is possible to execute:
786:
787: #!/usr/local/bin/rpl -sc
788:
789: TEST
790: <<
791: 1 1000 start VAR_S VAR_S2 next
792: >>
793:
794: VAR_S
795: <<
796: static 3 -> C << C disp 'C' incr if C 10 > then 'C' volatile end >>
797: >>
798:
799: VAR_S2
800: <<
801: static 3 -> C << C disp 'C' decr >>
802: >>
803:
804: - configure.in script is added in lapack subtree;
805: - VARS is modified to display variables status (LOCKED/UNLOCKED and
806: STATIC/VOLATILE/PARAMETER/VARIABLE);
807: - STATIC and VOLATILE intrinsics are added to specify static variables. A
808: static variable can be transformed into volatile with VOLATILE.
809: With STATIC, next variables created by '->' are static;
810: - PROTECT and UNPROTECT are added to protect variables against write
811: or purge actions. New PARAMETER and VARIABLE intrinsics are modified
812: versions of PROTECT and UNPROTECT that only deal with global variables
813: (see RCL/SAVE);
814: - variable management routines have been rewritten. The new ones are
815: uncompatible with the old ones. Before these changes, a local variable
816: was exported to a child subroutine, but cannot be modified into this
817: child subroutine. Now, a local variable is accessible only in its subroutine;
818: - SAVE intrinsic is added to manipulate global variables;
819: - SUSPEND is written. RPL/2 waits for a SIGCONT signal;
820: - SORT, COL->, ->COL, ROW->, ROW-> intrinsics are written;
821: - Makefile.am are improved;
822: - minor bug is fixed in ->list and ->array. Without any argument, these
823: intrinsic only send a SIGSEGV;
824: - ncurses is updated to release 5.6;
825: - lapack is updated to 3.1.0.
826: * Sun Dec 31 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8s (RPL/2)
827: - default CFLAGS/FFLAGS/FCFLAGS are modified due to a bug in gcc-sparc64
828: that avoid a complete build;
829: - CTRL+Z and CTRL+C signals only perform actions on main process;
830: - major bugs are fixed in multitasking capabilities (some mistakes with
831: mutexes and several terminated child process cannot be closed by the
832: operating system);
833: - minor bug fixed in SCLS (mistake between main and auxiliary axes);
834: - variables are now written in rpl-core file;
835: - NEG is modified to return 0 instead -0 when its argument is real or complex
836: number;
837: - ROW+ intrinsic can now be used on empty matrix without dimension error:
838: [[]] 1 [[ 1 2 ]] row+;
839: - major bug is fixed in SUB intrinsic. It only occurs with lists when
840: it tries to returns invalid elements like { } 1 2 sub;
841: - major bug is fixed in ROW- intrinsic;
842: - major bug is fixed in ROW+ intrinsic.
843: * Sat Dec 02 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8r (RPL/2)
844: - creation_nom_fichier() is rewritten to force all process to create
845: different file names;
846: - RANLUX is removed to use GSL library and avoid a bug in gfortran-4.1;
847: - readline-5.2 and units-1.86 are now used;
848: - SEQUENCE statement is added in fonctions_speciales.f90 to fix a build
849: failure.
850: * Mon Oct 23 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8q (RPL/2)
851: - wfproc is rewritten to avoid a dead lock;
852: - major mistake is fixed in both sommation_vecteur_reel() and
853: sommation_vecteur_complexe();
854: - multitasking is rewritten from scratch to fix some mistakes with
855: multithreading. DETACH, SEND and RECV now use four real time signals to
856: perform a better task synchronization;
857: - some bugs introduced by locales specific compilations are fixed;
858: - major memory corruption is fixed in DEPND;
859: - HELP intrinsic is modified to print a classified output.
860: * Mon Aug 12 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8p (RPL/2)
861: - major memory leak is fixed in DETACH intrinsic. Files were closed by
862: both childs and parent;
863: - bug that avoids usage of Motif is fixed in configure.in;
864: - makefile's are modified to build RPL/2 with other locale than ISO-8859;
865: - db is removed from source tree due to some compilation troubles (db's
866: autoconf script is broken);
867: - sdb is removed from source tree due to some memory leaks and some troubles
868: with its configure script. New SQL routines are written, but only MYSQL
869: subsystem is available. Now, SQL can be used without memory leak;
870: - major bug is fixed in evaluation() subroutine. Value of error flag
871: was not returned in some cases;
872: - FACT intrinsic does not accept real arguments anymore due to the new intrinsic
873: GAMMA;
874: - GAMMA intrinsic is added (complex function) ;
875: - autoconf/automake scripts are modified to compile F90 sources;
876: - src/distributions.f is replaced by src/distributions.f90. All Numerical
877: Recipes references are avoided to use GSL;
878: - GSL is upgraded to 1.8 release;
879: - -lz is added in src/Makefile.am to fix a mistake in sparc32.
880: * Mon Apr 10 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8o (RPL/2)
881: - fft.f is removed. Now FFT intrinsic uses dft subroutine;
882: - Sparc64 optimizations are modified. Now gcc-4.0 can be used to build RPL/2 on
883: Sparc64. Same modifications are done on sparc32;
884: - major bug are fixed in both PLOTTER and HISTOGRAM intrinsics
885: (interface with GNUplot).
886: - major bugs are fixed in USE/REMOVE intrinsics (system stack corruption);
887: - corruption of last stack is fixed in mclrin (only occurs when an error is
888: caught);
889: - major bug (in a malloc condition) is fixed in derivation().
890: * Tue Jan 07 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8n (RPL/2)
891: - configure script and makefiles are modified to be usable with automake
892: 1.9.6 (GNU), libtool 1.5.20 (GNU) and autoconf 2.59 (GNU).
893: - gestion_fichiers() prototype is modified to be built by gfortran. Now,
894: gfortran is the default compiler for FORTRAN code included in RPL/2;
895: - libdb is added to perform indexed file access;
896: - SQL interfaces are added (SQL intrinsic). Only mysql is supported;
897: - minor bug is discovered and fixed in matrix multiplication (precision);
898: - rpl.spec.in and debian directory are deleted due to some mistakes in the
899: scripts required to build packages.
900: * Tue Nov 15 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8m (RPL/2)
901: - major bug is fixed in IFERR/THEN/(ELSE)/END structure. It occured when an
902: error is caught before a regular IF/THEN/(ELSE)/END structure in
903: IFERR/THEN/(ELSE)/END structure;
904: - chmod 755 debian/rules is done by makefile;
905: - major bug is fixed in recherche_instruction_suivante():
906: +++"123 " str->
907: +++Erreur : Argument invalide pour la commande << "123 " str-> >>
908: Before this fix, it was impossible to use a command line that ends with spaces.
909: * Sat Oct 29 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8l (RPL/2)
910: - SELECT/CASE/DEFAULT/END is modified. Now, it is impossible to write:
911: SELECT
912: <case>
913: CASE <test> THEN <expr> END
914: ...
915: DEFAULT
916: DEFAULT <- two DEFAULT's
917: END
918:
919: or
920:
921: SELECT
922: <case>
923: CASE <test> THEN <expr> END
924: ...
925: DEFAULT
926: ...
927: CASE <test> THEN <expr> END <- CASE statement after DEFAULT
928: END
929: - major bug is fixed (in (unsigned char) getc()). It only occurs when RPL/2 is
930: built with gcc-4.0.
931: - configure.in is modified to be usable with gcc-4.0.
932: * Mon Oct 3 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8k (RPL/2)
933: - segmentation fault occurs in both PROMPT and INPUT when readline returns
934: NULL (ctrl^D). This trouble is now fixed;
935: - major bug is fixed in DATE intrinsic (julian days and reduced julian days);
936: - stderr of rplpp is now caught;
937: - SYSEVAL is modified to use stdin, stdout and stderr:
938: ESSAI
939: <<
940: // Only stdout and stderr
941: "ls" dup disp syseval
942: clmf
943: // Now with stdin ("zer\naze\n")
944: { "cat" "zer" "aze" } dup disp syseval
945: clmf
946: >>
947: - GSL is upgraded to 1.7.
948: * Thu Sep 29 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8j (RPL/2)
949: - SYSEVAL is modified. It now returns stdout and stderr in a list;
950: - minor memory leak is fixed in recherche_instruction_suivante() subroutine.
951: * Thu Aug 4 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8i (RPL/2)
952: - internal file descriptors are modified to be usable with DUMP intrinsic;
953: - VARS intrinsic is modified and now prints value of variables.
954: * Thu Jul 21 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8h (RPL/2)
955: - units is upgraded to 1.85 release;
956: - -d flag is added in command line. Don't use this flag if you don't know
957: what you do! It is only used to debug internal memory allocations;
958: - internal pointers (ADR objects) are printed as 64 bits pointers to be usable
959: on 64 bits wide architectures.
960: * Sat apr 16 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8g (RPL/2)
961: - DUMP is rewritten to be portable. It works, but without shared libraries,
962: printer file, graphic files and last error. Support for this kind of objects
963: shall be available as soon as possible. Warning: DUMP cannot be used in
964: multiprocessing;
965: - configure.in script is modified to return an error when g77 is not found;
966: - a new internal type is used to handle shared libraries;
967: - a major bug is discovered and fixed in recherche_type(). It only occurs
968: in interactive mode ([[ 1 ]] returns a syntax error);
969: - a major bug is found in simplification_arbre(). Subroutine is disabled.
970: * Thu mar 17 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8f (RPL/2)
971: - option -r is added to restart a process from a dump file;
972: - DUMP intrinsic is added. It performs synchronous checkpointing;
973: - GSL is upgraded to release 1.6.
974: * Wed dec 22 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8e (RPL/2)
975: - Result types of PERM and COMB instrinsic are fixed;
976: - RPL/2 now uses a new preprocessor due to a new 'feature' in gcc/cpp;
977: - RPL/2 can now use all processors on multiprocessor workstations with
978: DETACH, SEND, RECV and WFPROC new intrinsics. The first test program was:
979:
980: #!/usr/local/bin/rpl -cs
981:
982: MULTIPROCESSUS
983: <<
984: 'FONCTION' detach
985: do "B" disp until false end
986: >>
987:
988: FONCTION
989: <<
990: do "A" disp until false end
991: >>
992:
993: * Sun dec 12 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8d (RPL/2)
994: - major bug is discovered and fixed in analyse_notation_algebrique :
995: +++'A-B-C' returned
996: 1: 'A-(B-C)' instead of 1: 'A-B-C'. It is now fixed;
997: - recherche_type() routine is improved to cast in name 1E5E-6 or 1.23.4.5.
998: * Fri dec 7 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8c (RPL/2)
999: - major bug is fixed in formateur_fichier(). Now, it is possible to use
1000: lists in a file record. Note that only sequential and formatted files
1001: are supported;
1002: - major bug is fixed in BACKSPACE intrinsic. It only occurs on large
1003: records.
1004: * Fri nov 26 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8b (RPL/2)
1005: - minor bug is fixed in IP intrinsic: when argument was real without
1006: fraction part, IP returned a real, not an integer;
1007: - minor bug is fixed in recherche_type(): it is now possible
1008: to enter +++<NB3 + return. RPL/2 returns a syntax error, not a acces
1009: violation;
1010: - MCLRIN (MacLaurin series) intrinsic is added;
1011: - TAYLR (Taylor series) instrinsic is added;
1012: - very minor bug is fixed in evaluation(). Sometimes, when evaluation()
1013: is stopped by ^C, EXIT intrinsic did not work due to a mistake in
1014: the internal system stack;
1015: - minor bug is fixed in encart.c. System error messages returned by
1016: this subroutine were only available in french;
1017: - internal RPL/2 system stack corruption is fixed. This bug only affects
1018: interactive and debug modes when evaluation routine returns an error;
1019: - symbolic derivation subroutine is now able to derivate functions;
1020: - minor bug is fixed in instruction_multiplication: now 'X' 1. * returns
1021: 'X' and not 'X*1'.
1022: * Thu nov 18 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8a (RPL/2)
1023: - ctags in src/Makefile.am is fixed;
1024: - first derivation subroutines are written;
1025: - major bug is fixed in analyse_algebrique() :
1026: before this patch, '3-5+4' was understand as '3-(5+4)' !
1027: - instruction_division() is improved and returns 0 when it evaluates
1028: '0/X';
1029: - instruction_moins() is improved and returns 'NEG(X)' when it evaluates
1030: '0-X'.
1031: * Fri nov 5 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8 (RPL/2)
1032: - interface_gnuplot is modified and do not use any deprecated gnuplot
1033: commands. Warning, you must use gnuplot 4.0;
1034: - graphic output is improved. Now, it is possible to use two separated
1035: scales on the same 2D graph (with "main" and "auxiliary" option of SCALE
1036: intrinsic). For example:
1037:
1038: #!/usr/local/bin/rpl -c
1039:
1040: TEST
1041: <<
1042: 'X' indep
1043: { X Y } autoscale
1044: 'SIN(X)' steq draw
1045: { "auxiliary" } axes
1046: { X Y } autoscale
1047: 'COS(X)+2' steq draw
1048: { { "ticsonly" "automatic" } { "ticsonly" "automatic" } } axes
1049: drax persist
1050: >>
1051:
1052: - a major bug is fixed in encart.c;
1053: - ncurses is patched.
1054: * Mon nov 1 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7o (RPL/2)
1055: - configure script is updated;
1056: - splash screen is added;
1057: - minor bug is fixed in SYSEVAL (only occurs with SIGINT signal).
1058: * Sun oct 24 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7n (RPL/2)
1059: - stack overflows are caught.
1060: * Fri oct 8 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7m (RPL/2)
1061: - minor bug is fixed in both << and >> intrinsics. It only occurs when
1062: "<<" HELP or ">>" help is called;
1063: - DFT and IDFT are added;
1064: - minor bug is fixed in FFT (explicit length has to be positive);
1065: - MOD can be used with vectors and matrices arguments;
1066: - major bugs are fixed in FFT and IFFT (trouble in the computation of the
1067: default length of FFT). Only occur with matrices.
1068: * Sat aug 14 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7l (RPL/2)
1069: - readline is upgraded to 5.0;
1070: - gsl is upgraded to 1.5;
1071: - corrections in HELP functions.
1072: * Fri aug 7 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7k (RPL/2)
1073: - HELP is added;
1074: - statistic matrix SIGMA is renamed as SDAT;
1075: - rpl.h is modified to workaround a bug in Cygwin environment
1076: (SA_NOMASK is not defined in include files);
1077: - overflows are tested in HMS+ and HMS-;
1078: - CEIL, FLOOR and IP are modified to return a correct result with huge
1079: arguments that cannot be stored as integers;
1080: - fix a minor bug in ->LIST. The LAST stack now contains all arguments
1081: of this intrinsic;
1082: - flag 32 is used with DISP;
1083: - major bug is fixed in ->Q intrinsic (type of argument and memory leak).
1084: * Fri may 21 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7j (RPL/2)
1085: - major bug is fixed in analyse(). CHR intrinsic cannot be called because
1086: I have erased a 'break' in a case statement;
1087: - major bug is fixed in AXES intrinsic. It only occurs when AXES is used
1088: with "main" or "auxiliary" option;
1089: - major bug is fixed in recherche_types(). With this patch, 'sin(X)' is
1090: now well analysed as 'SIN(X)'.
1091: * Thu apr 22 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7i (RPL/2)
1092: - major bug is discovered and fixed in formateur(). It only occurs when
1093: an algebraic expression is displayed with '='. In some cases, parenthesis
1094: are missing. Same fix in formateur_fichier();
1095: - a minor bug is fixed in evaluation.c that does not return any error when
1096: it tries to execute 'a=z' e = ;
1097: - new code is written in each intrinsic functions to return their required
1098: arguments.
1099: * Sun apr 14 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7h (RPL/2)
1100: - a minor bug is fixed in recherche_type: 1.E90 is now a real;
1101: - minor bug is fixed in formateur_reel(). It only occurs in STD mode:
1102: 1E90 was printed as 1.00000000000000E90;
1103: - HELP is added;
1104: - formateur() is fixed to properly print matrices and lists;
1105: - a lot of warnings due to deprecated syntax are fixed;
1106: - DFT is modified but not usable;
1107: - cosmetic bug is fixed in formateur_tex.c;
1108: - minor bug is fixed in FFT intrinsic (segfault when FFT is called without
1109: any argument).
1110: * Sun Jan 25 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7g (RPL/2)
1111: - included ncurses is updated to 5.4;
1112: - included units is updated to 1.83c;
1113: - major bug is fixed in recherche_type() function. With this bug, RPL/2
1114: prints 'A/INV(Z+E)+R' when you enter A Z E + inv R + /;
1115: - DFT intrinsic is added. It returns the discrete Fourier transform of an
1116: array. When the length of each line is 2**n, the result is the same as
1117: the result of FFT;
1118: - minor bug is discovered and fixed in PUT and PUTI intrinsics when these
1119: instructions verify arguments types. It does not affect the result when
1120: all arguments are correct.
1121: * Sun Oct 19 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7f (RPL/2)
1122: - major bug is fixed in evaluation of both EXIT and CYCLE intrinsics. Now,
1123: EXIT can be used (as ABORT and KILL) to quit interactive mode of RPL/2;
1124: - units is updated to 1.83a release;
1125: - formateur_fichier.c is modified to handle unformatted files. This task
1126: is not completed.
1127: * Mon Aug 25 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7e (RPL/2)
1128: - CLUSR is written. It purges all global variables;
1129: - BESSEL intrinsic is fixed to allow the use of expressions as arguments;
1130: - a major bug was introduced with rpl-4.00pre7d in formateur.c. It appears
1131: when an algebraic expression is displayed or printed but does not affect
1132: computations. It is now fixed;
1133: - gsl is upgraded to 1.4.
1134: * Mon Aug 18 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7d (RPL/2)
1135: - algebraic expressions are now more readable when they are displayed
1136: (less parenthesis);
1137: - rplpp is modified to workaround a mistake in 'which' function (seems to appear
1138: on Debian distribution, but since cpp is in the default path, RPL/2 works
1139: fine...);
1140: - NOT is not correctly formatted in formateur.c:
1141: Z NOT -> 'NOT Z' but 'A+Z' NOT -> 'NOT A+Z' and 'NOT Z+A' -> 'NOTZ+A'
1142: with a NOTZ function !
1143: * Sun Aug 10 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7c (RPL/2)
1144: - CYCLE is fixed. Now, it is possible to use CYCLE in an expression even
1145: if the main loop is in a program;
1146: - RPL/2 is tested with efence and valgrind;
1147: - configure.in script is modified;
1148: - units.c is modified to be built by gcc-3.3. I only have removed a #if 0/#endif
1149: structure. I don't know why this code was compiled by gcc-3.3... Maybe
1150: another gcc bug...
1151: * Fri Jul 25 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7b (RPL/2)
1152: - EXIT is fixed. Now, it is possible to use EXIT in an expression when the
1153: main loop is in a program;
1154: - RPL/2 can take its arguments (and command) on the standard input. Try
1155: echo "1 2 3 + *" | rpl -i | grep "^1:" | cut -d ':' -f2
1156: - a minor bug in vim syntax file is fixed (CYCLE and EXIT intrinsics);
1157: - a minor bug is discovered in analyse_algebrique(). Now, expression
1158: such as 'A+Z AND 2' or '(A+Z) AND 2' are correctly parsed.
1159: * Mon Jun 16 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7a (RPL/2)
1160: - Major bug is fixed in evaluation subroutine. This one only occurs
1161: when an error in a user definition called by an expression is caught
1162: by an IFERR structure;
1163: - EXIT intrinsic can now be used in DO/UNTIL/END or WHILE/REPEAT/END loops;
1164: - sequenceur() is now uninterruptible with STOP signal in recherche_type()
1165: subroutine;
1166: - major bug is fixed in types.c (# xxxxxb) and recherche_instruction_suivante();
1167: - GSL exception (underflow) is now caught;
1168: - tools/Makefile.am is fixed;
1169: - Debian buildpackage script is fixed.
1170: * Tue Jun 10 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7 (RPL/2)
1171: All memory leaks issued from the pre6 beta releases seem to be fixed.
1172: Build process is improved and vim syntax file and manual pages are updated.
1173: * Mon Jun 9 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6l (RPL/2)
1174: - RCI and RCIJ intrinsic are added;
1175: - BESSEL intrinsic is added. Syntax:
1176: 3: type ("J", "K", "I", "Y", "j", "k", "i", "y")
1177: 2: order (integer or real)
1178: 1: x;
1179: - ->Q intrinsic is added;
1180: - major bug is fixed in C->R intrinsic;
1181: - ROW+ and ROW- are added and tested;
1182: - COL+ and COL- are added and tested. Syntax:
1183: 3: matrix
1184: 2: integer (number of column to be inserted)
1185: 1: column matrix to be inserted;
1186: - major bug was discovered in interface_gnuplot(). It only occurs when
1187: the subroutine reduces the graphical depth. It is now fixed;
1188: - Some mistakes are been fixed in vim syntax file;
1189: - SX2, SY2 and SXY are added;
1190: - SX and SY statistical intrinsics are added;
1191: - DEBIAN control file is fixed;
1192: - PAPER intrinsic is added. Supported paper formats are now : a4, a5, b5,
1193: letter, legal, executive;
1194: - PPAR is modified to include current graphic type.
1195: * Sun Jun 1 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6k (RPL/2)
1196: - SLICESCALE intrinsic is added. Its syntax is
1197: { "automatic" nb_of_levels }
1198: { "discrete" l1 l2 l3 ... }
1199: { "incremental" start incr }
1200: { "incremental" start incr end }
1201: { "automatic" } (default);
1202: - a minor bug (in last stack) is fixed in AXES intrinsic
1203: - flag 52 is used to automatically update graphics;
1204: - man pages are updated;
1205: - evaluation() is modified to perform evaluation of expressions that contain
1206: '=';
1207: - a minor bug is fixed in AXES intrinsic;
1208: - a minor bug is fixed in DRAW intrinsic (2D and 3D graphics were able to
1209: appear on the same figure). The same mistake is fixed in DRWS intrinsic;
1210: - LAST is disabled in evaluation subroutine (EVAL and ->NUM intrinsics).
1211: * Sun May 18 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6j (RPL/2)
1212: - SLICE intrinsic is added. It is used to draw 3D graphics as contour lines;
1213: - PLOTTER is added to draw statistical clouds with lines;
1214: - C and H source files now include vim parameters;
1215: - vim syntax file is modified to include new intrinsics;
1216: - static archive is modified to include all required libraries needed by
1217: RPL/2.
1218: * Sun May 4 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6i (RPL/2)
1219: - '=' is added and tested;
1220: - XCOL and YCOL are added;
1221: - a minor bug in analyse_syntaxique() is fixed;
1222: - THEN is modified to return an error when ELSE appears in a CASE/THEN/END
1223: structure. ELSE is modified to return an error when ELSE appears in
1224: an ELSE/END structure;
1225: - a major bug is fixed in CYCLE;
1226: - EXIT is written. When EXIT appears in a defined loop (FOR or START), the
1227: sequencer continues after the end of this loop;
1228: - SCLS is added;
1229: - DRWS now uses COLS to draw 2D graphics;
1230: - PPAR and SPAR are written. SPAR returns a list that contains the
1231: size of the statistical matrix (or "UNAVALAIBLE" if there is any
1232: statistical variable, or "DISABLED" if its type is not one of the type of
1233: a statistical matrix.) and XCOL and YCOL parameters. Warning: [[]] SIZE
1234: returns { 1 0 } and it is not a bug, because a null matrix contains _one_
1235: null line ! Thus, [[]] STOS SPAR returns { { 1 0 } 1 2 };
1236: - EXTERNAL intrinsic is added. Warning: by default, extern functions are
1237: disabled. Arguments of EXTERNAL are case sensitive because the external
1238: interface is written in C. { ext_sinus } EXTERNAL does not replace the list
1239: of known external functions but add the new list to the last. { "all" }
1240: EXTERNAL allows all external functions and { "none" } EXTERNAL removes all
1241: external names of the known functions;
1242: - mkrplso.in is modified.
1243: * Sun Apr 20 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6h (RPL/2)
1244: - vim syntax file is upgraded;
1245: - a minor mistake is fixed in recherche_instruction_suivante();
1246: - some minor memory leaks are fixed in recherche_type() function. They only
1247: occurs when a syntax error is detected;
1248: - #error and #warning preprocessor macros are added;
1249: - INCR and DECR are written (with integer or variable argument);
1250: - CSWP and RSWP are added and tested;
1251: - a minor bug is fixed in analyse.c;
1252: - DEBIAN/control is added to build debian package;
1253: - SCALE is fixed and improved ("automatic" keyword);
1254: - PUTC and PUTR new intrinsics are added.
1255: * Sun Apr 13 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6g (RPL/2)
1256: - a very minor bug is fixed in VISIT intrinsic. It only occurs when
1257: VISIT does not find a name in level 1;
1258: - configure.in script is modified to add a new test (--enable-debug
1259: flag). Configured with this fleg, RPL/2 will be built with electric-fences;
1260: - GETR (get row[s]) and GETC (get column[s]) are added. These new instructions
1261: extract a part of a matrix. Syntax: [[ 1 2 3 ][ 2 3 4 ]] { 1 } GETR or
1262: 'MATRIX' { 2 2 3 } GETR;
1263: - LOGSCALE intrinsic is improved and now, it can be used as
1264: { "main" "auxiliary" X Y } LOGSCALE;
1265: - SCALE intrinsic is used to fix the limits of a graphic. Its syntax is the
1266: same than AXES:
1267: { { 60 "ticsonly" 2 } { "automatic" "ticsonly" 10 } } axes
1268: { "auxiliary" { 60 "ticsonly" "default" } { "automatic" } } axes
1269: { { -10 10 } "automatic" } SCALE.
1270: Warning, it is not possible to ask a logarithmic scale with this intrinsic
1271: because it changes only the dimension of the screen. To have a logarithmic
1272: scale, you must use LOGSCALE intrinsic:
1273: { X } LOGSCALE gives a semi-log screen, { "auxiliary" X Y } gives a log-log
1274: screen on second scale;
1275: - { X X } autoscale and { Y Y } logscale are now invalid;
1276: - *D is added (depth multiplication, for 3D graphics);
1277: - a new intrinsic (*S) is added. It changes the scale of a graphic (X, Y
1278: and Z axes). The result of *S is the same than DUP DUP *H *W *D;
1279: - a major bug is fixed in GETI instrinsic when it is used with a name
1280: that contains a matrix or a vector (bad upper bounds conditions in
1281: incrementation);
1282: - DISP intrinsic now uses the 33-th flag. When it is not set
1283: (default), a final carriage return is sent to the terminal;
1284: - AXES intrinsic only takes a list that can contains the keywork
1285: "main" or "auxiliary". Before this modification, this keyword was in
1286: the first stack level;
1287: - vim syntax file is upgraded;
1288: - in appel_gnuplot(), stdin is closed when gnuplot is called with -raise
1289: option;
1290: - LAST is now disabled in the main loop of INT intrinsic;
1291: - expm1 and lnp1 are rewritten to use expm1 and log1p from math.h.
1292: * Sun Apr 6 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6f (RPL/2)
1293: - a major bug is fixed in evaluation() subroutine. It occurs with DRAW
1294: intrinsic when the equation cannot be evaluated (for example 'SIN(X)/X'
1295: in 0);
1296: - LAST is disabled in the main loop of DRAW intrinsic;
1297: - a major bug is fixed in DRAW intrinsic. When an error occurs in the
1298: evaluation of an equation, the system stack is returned corrupted to the
1299: sequencer;
1300: - the same minor bug is fixed in FOR and START. It only occurs when the limits
1301: of a loop are not integer or real.
1302: * Sun Mar 31 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6e (RPL/2)
1303: - the compilation stage aborts with an error message when two definitions
1304: have the same name. To improve the compilation() subroutine, I have to
1305: add some tests in gestion_variables.c;
1306: - recherche_type() subroutine ad some other connex subroutines are improved.
1307: Now, some syntax errors about object are caught and do not perform sequencer
1308: hangup;
1309: - readline is upgraded (minor compilation bug with recent gcc);
1310: - Makefile.am's and configure.in scripts are improved.
1311: * Fri Mar 14 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6d (RPL/2)
1312: - DRWS intrinsic is written. Two datastyles are associated: SCATTER (2D
1313: and 3D) and HISTOGRAM (only 2D, but 3 columns are accepted, the third shown
1314: the boxwidth, 1 by default);
1315: - recherche_type() is rewritten to be faster;
1316: - gsl is upgraded (release 1.3);
1317: - ncurses is upgraded and patched (release 5.3);
1318: - recherche_instruction_suivante() is fixed (string research with included
1319: '"') and rewritten to be faster;
1320: - appel_gnuplot() is fixed. When no graphic was available, it returned a
1321: segfault.
1322: * Sun Mar 9 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6c (RPL/2)
1323: - RPL/2 is compiled by gcc-3.2.2 and seems to work;
1324: - the same minor bug is fixed in REDRAW and DRAX functions;
1325: - a minor fix is written in DRAW function (2D and 3D);
1326: - AXES intrinsic is improved. Now { { pi "ticsonly" 4 } "automatic" } DRAX
1327: is accepted;
1328: - a minor bug is fixed in VISIT intrinsic.
1329: * Sun Jan 26 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6b (RPL/2)
1330: - a minor bug is fixed in evaluation subroutine;
1331: - vim syntax file is improved;
1332: - DRAW (wireframe section) is fixed. When an error occurs in the evaluation
1333: of a 3D-graphic (for example 'SIN(R)/R' with 'R=SQRT(X**2+Y**2)' in X=0 and
1334: Y=0), no graph was procuced (it results from a bug in gnuplot, and this fix
1335: is a quick and dirty workaround...);
1336: - RETURN intrinsic is modified to fix a trouble in interactive mode;
1337: - rplconvert is improved.
1338: * Sun Dec 22 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6a (RPL/2)
1339: - a memory leak is fixed in formateur.c that only occurs when RPL/2 try
1340: to print a list that contains a name;
1341: - a major bug is fixed in -> intrinsic that only occurs in evaluation case with
1342: a algebraic expression (<< 1 -> X 'X+1' >> eval);
1343: - vim syntax file is improved;
1344: - RPL/2 can now be built by gcc 3.2.1;
1345: - "**" can be used in algebraic expression;
1346: - DRAW can now plot wireframe (3D) graphics.
1347: * Sun Dec 8 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6 (RPL/2)
1348: - ncurses is patched to be compiled by gcc 3.2;
1349: - purification_chaine is rewritten to fix a major bug (when 'chaine' is empty);
1350: - a major bug is fixed in recherche_instruction_suivante();
1351: - minor bug is fixed in rpl-core file. The error message is now correctly
1352: written;
1353: - minor bug is fixed in analyse_notation_algebrique.c and types.c.
1354: Now, an expression such as 'A+' returns an error when it is analyzed;
1355: - VISIT intrinsic is added;
1356: - a major memory leak is fixed in evaluation.c. This bug rarely occurs in
1357: normal mode.
1358: * Sun Aug 25 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5e (RPL/2)
1359: - an EDIT intrinsic is added;
1360: - PRMD intrinsic returns french or english messages;
1361: - rpl-core now call LAST intrinsic if the last stack is avalaible. It
1362: contains the error message too;
1363: - new syntax, ftplugin and indent files are written for vim text editor;
1364: - major bug is found and fixed in RCL intrinsic;
1365: - major bug is found and fixed in OR intrinsic.
1366: * Mon Jul 29 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5d (RPL/2)
1367: - ncurses is updated;
1368: - minor bug is fixed on PURGE instruction (an error no caught was
1369: returned in interactive mode).
1370: * Mon Jul 21 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5c (RPL/2)
1371: - ASL (arithm. shift left) is added.
1372: * Thu Jul 11 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5b (RPL/2)
1373: - ncurses is patched;
1374: - gsl is added to perform arithmetic operations;
1375: - units is patched;
1376: - some very minor bugs have been fixed.
1377: * Wed May 15 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5a (RPL/2)
1378: - ncurses is patched;
1379: - RPL/2 can now be built by gcc 3.1;
1380: - RDZ is fixed (minor bug).
1381: * Sun Apr 21 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5 (RPL/2)
1382: - RPL/2 can now be called from other languages (librpl libraries).
1383: * Sun Mar 24 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4h (RPL/2)
1384: - ERRN and ERRM can now be used with errors returned by external functions;
1385: - readline and ncurses have been updated;
1386: - no more bugs have been reported since the rpl-4.00pre4g release.
1387: * Wed Feb 20 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4g (RPL/2)
1388: - ERRN and ERRM intrinsic functions are written. They return the last
1389: error number or message even if errors are caught by an IFERR structure;
1390: - a minor bug is fixed in EPSILON intrinsic. Now, 'EPSILON(0)' returns
1391: a non null value;
1392: - Ncurses is updated.
1393: * Mon Feb 18 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4f (RPL/2)
1394: Arithmetic intrinsic instructions (- +, -, *, / and **) are improved :
1395: 'X' 0 + and 0 'X' + return 'X';
1396: 'X' 0 - returns 'X';
1397: 'X' 1 * and 1 'X' * return 'X';
1398: 'X' 0 * and 0 'X' * returns 0;
1399: 'X' 1 / returns 'X';
1400: 'X' 1 ** returns 'X';
1401: 'NEG(X)' NEG returns 'X';
1402: - autoconf/automake scripts are improved: now, the size of the different types
1403: found by configure are used in rpltypes.h (rplconfig.h is written by configure);
1404: - rdynamic flag is added in src/Makefile.am. This flag is used in the first
1405: makefile, but forgotten in the new process;
1406: - Flag 31 is tested before saving any arguments in bibliotheques_externes.c;
1407: - POS can now be used on lists;
1408: - ELSILON is written. This function returns the smallest real e(x) such as
1409: e+abs(x) != abs(x).
1410: * Mon Feb 11 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4e (RPL/2)
1411: - now, INT intrinsic function can be interrupted;
1412: - precision of sommation_vecteur_xxx() subroutines is improved;
1413: - new vim syntax file written for vim 6.0.
1414: * Mon Feb 04 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4d (RPL/2)
1415: - explicit error messages are now printed when the RPL/2 is used in
1416: interactive mode;
1417: - major bug is fixed in OPEN intrinsic: with 'REPLACE' status, file lock was
1418: tested after the file is opened, thus, when the file was locked, it was
1419: deleted too!;
1420: - configure script is improved (and it seems to be good ;-) );
1421: - An --disable-experimental flag is added to the configure script. Thus, even
1422: if you compile a beta release, you can compile a stable RPL/2;
1423: - new syntax and ftplugin written for vim 6.0.
1424: * Wed Jan 30 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4c (RPL/2)
1425: - configure script is improved.
1426: * Sun Jan 27 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4b (RPL/2)
1427: - ncurses now replaces termcap;
1428: - Côme DESPLATS has written a configure script.
1429: * Fri Jan 18 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4a (RPL/2)
1430: - KIND is added and returns the type of the numerical argument ;
1431: - history file is added.
1432: * Tue Jan 15 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4 (RPL/2)
1433: - Stable release. Unformatted files are disabled in this release.
1434: * Mon Jan 14 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3h (RPL/2)
1435: - SIGTSTP (CTRL+Z) is added. In a script, a SIGTSTP signal signifies
1436: that the RPL/2 seqencer must stop and must give a prompt. This
1437: signal is an asynchonous "HALT" command;
1438: - SIGINT (CTRL+C) variables stack corruption is fixed;
1439: - IFERR seems to be fixed (in equation evaluation routine);
1440: - Memory leak is fixed (ADR object type);
1441: - DATE returns both date and hours;
1442: - TIME now returns user and system CPU times;
1443: - MEM is added.
1444: * Thu Jan 10 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3g (RPL/2)
1445: - Makefile is improved to support sparc v7 (sun4c), sparc v8 (sun4m) and
1446: sparc v9 (sun4u). Now, RPL/2 can be built on i386 (i486 is known as i386),
1447: i586, i686, K6, K7, alpha ev4, alpha ev5, alpha ev56, alpha ev6, sparc v7,
1448: sparc v8 and sparc v9. Compilation of RPL/2 on my Sun Sparc 2 (sun4c,
1449: CPU 4/75, 64 MB, 40 MHz with FPU) is a very great mission :
1450:
1451: Newton:[~/rpl/rpl] > time make install
1452: ...
1453: real 338m39.623s
1454: user 324m32.290s
1455: sys 10m47.380s
1456: Newton:[~/rpl/rpl] >
1457:
1458: I don't know if you will compile this language on old worstations, but
1459: it is usable ;-) ;
1460: - SYSEVAL is improved. An external program can be called without any shell.
1461: Thus, even if the sticky bit is set, RPL/2 can not give a shell root when
1462: a SYSEVAL command crashes;
1463: - minor bug is fixed in recherche_type() (# xxxxb parsing);
1464: - presence of bootstrap entry point is verified before launching the
1465: sequencer;
1466: - minor bug is fixed in formateur_tex() (underscore in mathematical
1467: expression);
1468: - Lapack is updated.
1469: * Thu Jan 3 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3f (RPL/2)
1470: - IFERR is now known in an expression, but not usable.
1471: * Mon Dec 31 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3e (RPL/2)
1472: - several bugs are fixed.
1473: * Mon Dec 17 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3d (RPL/2)
1474: - major bugfix in file locking.
1475: * Fri Dec 14 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3c (RPL/2)
1476: - minor fixes is system() call.
1477: * Fri Nov 30 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3b (RPL/2)
1478: - automatic limitation of the graphical depth due to a limitation (bug ?)
1479: of gnuplot.
1480: * Mon Nov 19 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3a (RPL/2)
1481: - new file temp management.
1482: * Sun Nov 18 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3 (RPL/2)
1483: - memory leak is fixed in STO instruction;
1484: - minor bug in file management is fixed;
1485: - BACKSPACE is added;
1486: - VARS is added;
1487: - file locks are improved.
1488: * Wed Nov 14 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2l (RPL/2)
1489: - major bug is fixed (on sparc architecture) and RPL/2 can now run
1490: on sparc stations;
1491: - INDEP and DEPND are improved;
1492: - AXES is added;
1493: - WRITE, APPEND and REWIND are added.
1494: * Sun Nov 11 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2k (RPL/2)
1495: - write is improved ;
1496: - major bug is found and fixed in copie_objet() with struct_fichier;
1497: - minor bug is fixed in OPEN function;
1498: - minor bug is fixed in analyse_syntaxique() subroutine. All commands
1499: are analysed before starting their executions.
1500: * Thu Nov 8 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2j (RPL/2)
1501: - minor bug is fixed in appel_gnuplot();
1502: - RPL/2 can work without LANG variable.
1503: * Wed Oct 31 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2i (RPL/2)
1504: - WAIT function is improved (removing the polling function);
1505: - LAST stack is not active (default) when rpl is called without the option -i.
1506: In all other cases, LAST stack is active;
1507: - Labels can be added on a gnuplot output (function LABEL);
1508: - LCD-> and ->LCD are added.
1509: * Sun Oct 21 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2h (RPL/2)
1510: - minor bug is fixed in TeX output (pi);
1511: - new english manual is added.
1512: * Wed Oct 16 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2g (RPL/2)
1513: - LOCK, WFLOCK and UNLOCK are added. A file is locked when it is opened;
1514: - VERSION function is added. It returns the version number of the interpreter;
1515: - minor bug is fixed in evaluation subroutine;
1516: - english error messages are been fixed.
1517: * Tue Oct 09 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2f (RPL/2)
1518: - interrupt subroutine is added;
1519: - formatted files support is continued.
1520: * Sun Sep 30 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2e (RPL/2)
1521: - formateur_fichier.c is added to perform formatted files write.
1522: * Thu Sep 27 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2d (RPL/2)
1523: - minors bugfixes in FIX format in formateur_reel() subroutine;
1524: - new manual page in english;
1525: - FORMAT intrinsic is added and can read any format for "formatted" file.
1526: * Sun Sep 23 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2c (RPL/2)
1527: - OPEN, CLOSE, SYNC, INQUIRE, CREATE and DELETE are tested;
1528: - a man page in the first manual section is written.
1529: * Thu Sep 20 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2b (RPL/2)
1530: - major bugfixes in recherche_type() subroutine: sometimes in interactive mode,
1531: this routine was be able to forget the last element of a list, a vector or
1532: a matrix.
1533: * Mon Sep 17 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2a (RPL/2)
1534: - OPEN, CLOSE and DELETE are known by the language but not very usable;
1535: - minor bugfixes in evaluation routine.
1536: * Sun Sep 16 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2 (RPL/2)
1537: - major bugfixes in evaluation routine.
1538: * Sat Sep 15 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1d (RPL/2)
1539: - conditional structures can be used in equations.
1540: * Fri Sep 14 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1c (RPL/2)
1541: - Minor bugfixes in makefile.
1542: * Sat Sep 8 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1b (RPL/2)
1543: - CONVERT is written;
1544: - CYCLE, FOR/NEXT, FOR/STEP, START/NEXT, START/STEP, DO/UNTIL/END and
1545: WHILE/REPEAT/END can now be used in an equation;
1546: - I fix some troubles with evaluation subroutine;
1547: - db3 library is added.
1548: * Thu Sep 6 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1a (RPL/2)
1549: - add rplconvert and rplunits sources;
1550: - add CONVERT definition (but it does not work).
1551: * Mon Sep 3 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1 (RPL/2)
1552: - initial public release (GPL).
1553: * Thu Apr 2 1998 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre0 (RPL/2)
1554: - RPL is rewritten from scratch and named RPL/2.
1555: #* 1992 BERTRAND Joël rpl-3.02 (RPL-387)
1556: #- minor bugfixes.
1557: #* 1991 BERTRAND Joël rpl-3.01 (RPL-387)
1558: #- arithmetic processor support is added to improve global performances.
1559: #* 1991 BERTRAND Joël rpl-3.00 (RPL-386)
1560: #- idem... but on an i386DX...
1561: #* 1990 BERTRAND Joël rpl-2 (RPL-6809)
1562: #- a new release on a more powerfull processor and with new functions and an
1563: #built-in editor. It has been written on a SMT-Goupil G3-6809 running
1564: #Flex9 (320 KB of RAM and a graphic card used to draw 512*256 graphics in
1565: #8 colors)
1566: #* 1989 BERTRAND Joël rpl-1 (RPL-6502)
1567: #- initial release (only an historic interest) written on an ORIC Atmos 48K.
1568: #No graphic was provided.
CVSweb interface <joel.bertrand@systella.fr>