Annotation of rpl/ChangeLog, revision 1.299

1.298     bertrand    1: * Sun Feb 17 2019 BERTRAND Joël <rpl@systella.fr> rpl-4.1.31 (RPL/2)
                      2: - multithreading support is improved (and some bugs have been fixed);
1.299   ! bertrand    3: - SYSEVAL now sends data to stdin in a slave thread.
1.296     bertrand    4: * Sat Feb 2 2019 BERTRAND Joël <rpl@systella.fr> rpl-4.1.30 (RPL/2)
                      5: - major bug is fixed in software interrupts subsystem that tried to
                      6: lock a cleared mutex;
1.295     bertrand    7: - deadlock is fixed in SYSEVAL. This intrinsic function entered in
                      8: deadlock if stdout/stderr of spawned subprocess was longer than pipe buffer
                      9: size;
1.294     bertrand   10: - segmentation fault is fixed in NEG (on integer matrices);
1.292     bertrand   11: - CoCoALib is upgraded to avoid a compilaton failure on 32 bits systems;
1.293     bertrand   12: - SST does not enter anymore in called subroutine.
1.289     bertrand   13: * Mon Dec 24 2018 BERTRAND Joël <rpl@systella.fr> rpl-4.1.29 (RPL/2)
1.287     bertrand   14: - sqlite, openssl, ncurses, gsl and gnuplot are upgraded;
1.286     bertrand   15: - new record type is added. Record is a table extension. Data have been to be
1.287     bertrand   16: called by name and not by position:
1.288     bertrand   17: 
1.287     bertrand   18: RPL/2> <[ "key" "value" ]> record
                     19: 
1.288     bertrand   20: 1: |[ <[ "key"
                     21:          "value" ]>
                     22:       <[ { }
                     23:          { } ]> ]|
                     24: 
1.289     bertrand   25: - records can be used with GET and PUT.
1.286     bertrand   26: * Thu May 29 2018 BERTRAND Joël <rpl@systella.fr> rpl-4.1.29 (RPL/2)
1.285     bertrand   27: - backslash can now be used in REGEX intrinsic;
                     28: - LINE*(*) is added to format. Now, it is possible to read and write regular
                     29: sequential files;
1.284     bertrand   30: - first table support is added to RPL/C;
1.283     bertrand   31: - unEscString() and escString() are added in RPL/C.
1.281     bertrand   32: * Thu May 29 2018 BERTRAND Joël <rpl@systella.fr> rpl-4.1.28 (RPL/2)
                     33: - mise à jour de Lapack en 3.8.0;
                     34: - mise à jour générale de RPL/CAS et des utilitaires dans le répertoire tools;
1.280     bertrand   35: - memory corruption is fixed in SPLASH intrinsic;
1.279     bertrand   36: - remove multiple module rpl_complex from Fortran sources;
1.278     bertrand   37: - ncurses is upgraded;
1.277     bertrand   38: - NBRCPUS is added ;
1.276     bertrand   39: - splash screen is not centered on screen that contains pointer.
1.272     bertrand   40: * Thu Aug 03 2017 BERTRAND Joël <rpl@systella.fr> rpl-4.1.27 (RPL/2)
1.271     bertrand   41: - DETACH is fixed and now runs as expected;
1.270     bertrand   42: - motif$ is reborned;
                     43: - '->' can now by used in external names;
                     44: - sets$ library is done;
                     45: - new types can be created in external libraries;
1.275     bertrand   46: - major bug is fixed in allocation(). When allocation size was null, there
1.269     bertrand   47: was a buffer overflow (8 bytes);
1.268     bertrand   48: - new types can be created and managed in modules (see modules/sets for
                     49: example).
1.270     bertrand   50: * Wed Jun 28 2016 BERTRAND Joël <rpl@systella.fr> rpl-4.1.26 (RPL/2)
1.264     bertrand   51: - major bug is fixed in READ (FLOW sockets);
1.262     bertrand   52: - Lapack is upgraded to 3.7.0;
1.261     bertrand   53: - OpenSSL is upgraded;
1.263     bertrand   54: - GSL is upgraded to 2.4;
1.259     bertrand   55: - file is upgraded to 5.29;
1.258     bertrand   56: - some modifications are done to buld RPL/2 (and modules built with RPL/C) under
                     57: Cygwin (Windows 10, 64 bits);
1.257     bertrand   58: - some symbols are removed from executable;
                     59: - readline is upgraded to 7.0;
1.259     bertrand   60: - OpenSSL symbols are not exported anymore;
1.273     bertrand   61: - gnuplot is upgraded to 5.0.6.
1.254     bertrand   62: * Tue Sep 27 2016 BERTRAND Joël <rpl@systella.fr> rpl-4.1.25 (RPL/2)
1.252     bertrand   63: - ncurses, file, openssl and sqlite are upgraded;
1.251     bertrand   64: - major bug is fixed in DETACH (race condition and dead lock);
1.249     bertrand   65: - lot of minor bugs have been fixed in processus management;
1.248     bertrand   66: - (p)select() is replaced by poll() due to a strange bug in glibc. pselect()
                     67: returns a erroneous number of readable devices when max file descriptor is
                     68: greater than 1024;
1.253     bertrand   69: - tools/file-5.25.diff.gz is fixed (against file-5.25 and not 5.11);
                     70: - OpenSSL is upgraded and new API is used.
1.245     bertrand   71: * Tue Mar 01 2016 BERTRAND Joël <rpl@systella.fr> rpl-4.1.24 (RPL/2)
                     72: - tools are upgraded (xpm, openssl, ncurses, sqlite, file);
1.244     bertrand   73: - BSD sockets options are fixed;
1.243     bertrand   74: - RPL/2 splash screen is upgraded;
1.242     bertrand   75: - gmp is upgraded to 6.1.0;
1.241     bertrand   76: - sys_realloc() is added in library to allow reallocation à la C in RPL/C
                     77: programs;
                     78: - reallocate function is added to rplexternals.h;
                     79: - GET, GETI, LIST-> and TABLE-> now evaluate symbolic constants instead of
                     80: return associated fonctions in stack;
                     81: - { e } 1 get now returns e and not E. Same fix with infinity and i symbolic
                     82: constants ;
                     83: - GET is fixed and now evaluates names when names are not protected:
                     84: 4 'X' sto { X } 1 get returns 4 and not X. Same fix for tables;
                     85: - --enable-native flag is added to configure script;
1.240     bertrand   86: - lapack is upgraded to 3.6.0.
1.239     bertrand   87: * Thu Nov 26 2015 BERTRAND Joël <rpl@systella.fr> rpl-4.1.23 (RPL/2)
1.237     bertrand   88: - Giac is upgraded to 1.2.2 and mpfi is added;
1.238     bertrand   89: - GSL is upgraded to 2.1;
1.235     bertrand   90: - major bug is fixed in interruption (mutexes failure);
1.234     bertrand   91: - minor bug is fixed in evaluation():
                     92: << 1 'X' sto { X } 'Y' sto 'Y(1)' eval >> returns 1 and
                     93: << 1 'X' sto { 'X' } 'Y' sto 'Y(1)' eval >> only returns 'X'.
                     94: Same bugfix for tables;
1.233     bertrand   95: - 4 'X' sto <[ X ]> returns <[ X ]> in both interpreted and compiled mode.
                     96: Before this bugfix, it returned <[ 4 ]> in interpreted mode and <[ X ]>
                     97: in compiled mode.
1.231     bertrand   98: * Wed Sep 16 2015 BERTRAND Joël <rpl@systella.fr> rpl-4.1.22 (RPL/2)
1.230     bertrand   99: - socket options are now forced on socket created by WFSOCK to fix 'KEEP ALIVE'
                    100: bug;
1.229     bertrand  101: - sqlite is upgraded;
1.227     bertrand  102: - major regressions are fixed in compiler;
1.226     bertrand  103: - gnuplot is upgraded from 5.0.0 to 5.0.1;
                    104: - ncurses is upgraded from 5.9 to 6.0 ;
1.225     bertrand  105: - major bug is fixed in rpl_malloc(). rpl_malloc(0) crashed with segfault.
                    106: * Mon Jun 08 2015 BERTRAND Joël <rpl@systella.fr> rpl-4.1.21 (RPL/2)
1.224     bertrand  107: - nested function options() is removed from instruction_open() as
                    108: LLVM/CLANG does not support this kind of function;
1.223     bertrand  109: - sqlite and ncurses are upgraded;
1.222     bertrand  110: - all compilation errors are now printed;
1.221     bertrand  111: - escaped characters are allowed in LOGGER intrinsic;
1.220     bertrand  112: - 1 -> Y 'Z' now returns undefined implicit name error.
1.218     bertrand  113: * Mon Feb 19 2015 BERTRAND Joël <rpl@systella.fr> rpl-4.1.20 (RPL/2)
1.217     bertrand  114: - minor bug is fixed in evaluation(). When analyse() is called from
                    115: evaluation(), RPL/2 always evaluates compiled expression;
1.216     bertrand  116: - 1 -> X 'X' can be evaluated ('X' is a name and before last patch, only
                    117: algebraic expressions were able to be directly evaluated);
1.219     bertrand  118: - major regression introduced in 4.1.19 is fixed in parser.
                    119: << 1 -> X << exp >> >> returned syntax error;
1.214     bertrand  120: - compilation() now returns an error if a definition name contains invalid
                    121: characters instead of BUG();
1.213     bertrand  122: - zlib is upgraded;
1.212     bertrand  123: - sqlite and openssl are upgraded;
1.250     bertrand  124: - new buffercached allocator is added;
1.210     bertrand  125: - giac is upgraded to 1.1.4;
1.209     bertrand  126: - Gnuplot is upgraded to 5.0.0.
1.207     bertrand  127: * Mon Jan 5 2015 BERTRAND Joël <rpl@systella.fr> rpl-4.1.19 (RPL/2)
                    128: - EQV is added in algebraic input and output subroutines;
                    129: - ncurses and sqlite have been upgraded with last patches;
1.206     bertrand  130: - openssl is upgraded to 1.0.1j and Gnuplot is upgraded to 4.6.6;
                    131: - expression simplification subsystem is rewritten from scratch. Now, it does
                    132: not do anything. Only fonctions to convert algebraic expression to and from
                    133: q-tree have been written and successfuly tested;
1.205     bertrand  134: - EQV intrinsic is added;
1.208     bertrand  135: - major bug is fixed in XOR intrinsic (erroneous truth table with integer
                    136: or real arguments);
1.204     bertrand  137: - parser is upgraded. Now, it is possible to write <[[[3]]]> or {{5}} (without
                    138: space) and [[ 3 4 ]]4 catches error;
1.203     bertrand  139: - major regression is fixed in recherche_type() (complex type);
1.202     bertrand  140: - shebang paths are modified to be computed by configure script (NetBSD issue);
1.201     bertrand  141: - ncurses is upgraded.
1.199     bertrand  142: * Thu Jul 17 2014 BERTRAND Joël <rpl@systella.fr> rpl-4.1.18 (RPL/2)
1.198     bertrand  143: - major regression is fixed in SysV semaphore emulation subsystem (segfault);
1.197     bertrand  144: - gmp is upgraded;
1.196     bertrand  145: - ncurses is upgraded;
                    146: - empilement_pile_last() is modified to delete argument from current stack if
                    147: it cannot save all arguments (to few arguments error _before_ first call
                    148: to depilement() by parent routine).
1.194     bertrand  149: * Wed Apr 23 2014 BERTRAND Joël <rpl@systella.fr> rpl-4.1.17 (RPL/2)
                    150: - semaphores have been removed from s_signaux as POSIX doesn't assure that
                    151: semaphores are synchronized between address spaces without msync();
                    152: - sqlite is upgraded;
                    153: - OpenSSL is upgraded;
1.193     bertrand  154: - lapack is upgraded to 3.5.0;
1.192     bertrand  155: - use of uninitialized variables is avoided in FORALL;
                    156: - giac is upgraded;
                    157: - units is upgraded;
                    158: - OpenSSL, sqlite and gnuplot are upgraded;
1.191     bertrand  159: - major bug is fixed in both FOR and FORALL (segmentation fault if both
                    160: instructions are not followed by a name).
1.190     bertrand  161: * Fri Nov 28 2013 BERTRAND Joël <rpl@systella.fr> rpl-4.1.16 (RPL/2)
1.189     bertrand  162: - OpenMotif is patched to correctly detect fontconfig;
1.188     bertrand  163: - sqlite and ncurses are patched;
                    164: - rpl.inc is fixed;
                    165: - rpl() now sends arguments to RPL/2 subroutine;
1.187     bertrand  166: - rpl() prototype is fixed (rpl_home is an unsigned char * not an unsigned char
                    167: **);
1.186     bertrand  168: - GSL is upgraded;
                    169: - major bug is fixed in READ intrinsic (Unix device).
1.185     bertrand  170: * Fri Sep 6 2013 BERTRAND Joël <rpl@systella.fr> rpl-4.1.15 (RPL/2)
                    171: - RGDL and RGDR (ragged left and ragged right) are added;
1.184     bertrand  172: - major bug is fixed in initialization (segfault). It only occurs when RPL/2
1.183     bertrand  173: is built with a forced localization;
1.182     bertrand  174: - EXIT regression is fixed.
1.180     bertrand  175: * Fri Jun 21 2013 BERTRAND Joël <rpl@systella.fr> rpl-4.1.14 (RPL/2)
1.178     bertrand  176: - number of pipes between process is reduced;
1.177     bertrand  177: - gnuplot is upgraded;
1.176     bertrand  178: - libiconv is patched to be built with recent glibc (C11);
1.175     bertrand  179: - some race conditions have been fixed;
1.174     bertrand  180: - sqlite is upgraded;
1.173     bertrand  181: - Major regression is fixed in IFERR/END structure;
1.172     bertrand  182: - Major regression is fixed in evaluation(). Local variables were exported
                    183: to called definitions.
                    184: * Mon Apr 1 2013 BERTRAND Joël <rpl@systella.fr> rpl-4.1.13 (RPL/2)
1.169     bertrand  185: - integer overflows have been fixed (NEG, ABS, minus);
1.168     bertrand  186: - global variables can now be recalled from ATEXIT procedure;
1.167     bertrand  187: - ATEXIT registered procedure is now executed even if program is stopped by
                    188: SIGINT;
1.165     bertrand  189: - minor bug is fixed in TOKENIZE intrinsic instruction. TOKENIZE did not work on
                    190: a copy of input string;
1.164     bertrand  191: - major bug (segfault) is fixed in liste_variables(). It only occurs
                    192: when this function is called with shared variables;
1.163     bertrand  193: - all internal data are now stored in 64 bits wide integers (even is 32 bits
                    194: ABI is selected);
1.162     bertrand  195: - major bug is fixed in recherche_instruction_suivante(). In some
                    196: circumstances, this function can return a spurious error;
1.161     bertrand  197: - new NATIVE*(*) data format is added. By default, native*(*) is used
                    198: to write data without precision loss. It can also be used to write
                    199: complex objects like expressions, lists or tables;
1.160     bertrand  200: - major bug is fixed in formateur(). When INT64_MIN was pushed into stack,
                    201: internal value was good but RPL/2 was not able to correctly display
                    202: this value. This bug comes from ABS as ABS(INT64_MIN) cannot be represented
1.171     bertrand  203: in integer. All abs(), fabs() and labs() present in source code have been
                    204: checked to avoid this kind of bug;
1.159     bertrand  205: - unformatted sockets are now usable as unformatted files;
1.158     bertrand  206: - BACKSPACE now runs on unformatted file;
                    207: - major bug is fixed in BACKSPACE that didn't check if '"' characters were
                    208: escaped;
1.157     bertrand  209: - CHARACTER*(n) format now counts escaped characters;
1.155     bertrand  210: - transliteration is avoid in rpl-core file generation to authorize core
                    211: creation even if a transliteration error is caught;
                    212: - major bug is fixed in evaluation(). System stack was not correctly
                    213: destacked when execution error occurs;
1.154     bertrand  214: - major bug is fixed in READ (socket interface);
                    215: - minor bug is fixed in analyse_flux().
1.169     bertrand  216: * Wed Feb 27 2013 BERTRAND Joël <rpl@systella.fr> rpl-4.1.12 (RPL/2)
1.153     bertrand  217: - bug is fixed in recherche_type(). { "\"" } was not evaluated as expected
                    218: as inner quote was not escaped;
1.152     bertrand  219: - CIPHER new intrinsic is added to perform key generation, decryption and
                    220: encryption;
1.151     bertrand  221: - CBC-CMAC digest is added;
1.150     bertrand  222: - HMAC digest is added;
1.149     bertrand  223: - DIGEST intrinsic is added;
1.148     bertrand  224: - signal management is fixed to be usable on NetBSD;
1.147     bertrand  225: - RPL/CAS autoconfiguration is upgraded;
                    226: - sqlite, openssl, giac, gmp ave been upgraded;
1.146     bertrand  227: - SQLITE support is added in SQLQUERY, SQLCONNECT and SQLDISCONNECT.
1.145     bertrand  228: * Tue Dec 18 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.11 (RPL/2)
                    229: - shared variables are now stored in a tree;
                    230: - lapack is upgraded to 3.4.2;
1.142     bertrand  231: - only giac/src is built in rplcas (giac/Makefile.am is modified);
                    232: - gnuplot is upgraded to 4.6.1;
1.141     bertrand  233: - giac, units and ncurses are upgraded;
1.140     bertrand  234: - interprocess capabilities are removed when RPL/2 cannot run its initialization
                    235: routine to keep operating system as clean as possible;
1.139     bertrand  236: - sem_wait() has to catch EINTR in thread_surveillance_signaux();
1.138     bertrand  237: - signal management is rewritten to avoid a strange bug on NetBSD. On NetBSD,
                    238: a signal handler can be called within a special thread and not in the
                    239: calling thread;
1.144     bertrand  240: - static variables are now written in a variables tree;
1.136     bertrand  241: - major bug is fixed in STO intrinsic. STO returns an error when it has
                    242: to create a global variable if intrinsic none (default) is set.
1.134     bertrand  243: * Mon Oct 1 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.10 (RPL/2)
1.133     bertrand  244: - FORALL intrinsic is added;
1.132     bertrand  245: - major bug (deadlock) is fixed in CYCLE. Only occurs when CYCLE is called to
1.133     bertrand  246: interrupt a loop from a subroutine within a compiled programm;
1.131     bertrand  247: - workaround to avoid strange bug on slow network is written in READ
                    248: intrinsic;
                    249: - CRITICAL/END structure is added. When program enters in a critical
                    250: section, all other threads of the same process sleep until program leaves
                    251: critical section.
1.129     bertrand  252: * Wed Aug 22 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.9 (RPL/2)
                    253: - giac is upgraded to 0.9.8;
                    254: - ncurses is patched with last patches;
1.128     bertrand  255: - Sqlite is upgraded to 3.7.13;
                    256: - Units is upgraded to 1.89e;
                    257: - Lapack is upgraded to 3.4.1;
1.127     bertrand  258: - LENGTH*(...) format is fixed;
1.126     bertrand  259: - some patches have been added to build RPL/2 on NetBSD;
1.124     bertrand  260: - escaped characters are fixed in READ and WRITE operations;
1.123     bertrand  261: - major bug is fixed in READ intrinsic (on socket). End of file condition
                    262: was randomly caught on slow network;
1.122     bertrand  263: - stdin can now handle espaced characters strings in SYSEVAL;
1.121     bertrand  264: - --with-gcc-version is added to configure script to force gcc version as
                    265: gfortran 4.7 is broken and crashes with segmentation fault.
1.119     bertrand  266: * Mon May 21 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.8 (RPL/2)
                    267: - POLL now accepts more than one descriptor and returns informations
1.118     bertrand  268: about pollable descriptors;
                    269: - SMPHRTRYDECR now takes timeout value instead of returning when semaphore
                    270: cannot by decremented;
1.117     bertrand  271: - signal handlers are fixed to avoid spurious and very rare deadlocks;
1.116     bertrand  272: - pari is upgraded;
1.115     bertrand  273: - force CFLAGS for tools/file (-O2 -g) to avoid mmap() error;
1.114     bertrand  274: - giac, gmp and mpfr have been upgraded.
1.113     bertrand  275: * Fri Apr 13 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.7 (RPL/2)
1.112     bertrand  276: - double quote is escaped in INPUT and PROMPT intrinsic functions;
1.111     bertrand  277: - error is returned (instead of warning) when unavailable intrinsic function
                    278: is called;
1.110     bertrand  279: - lot of minor bugs have been fixed;
                    280: - ncurses and file are patched;
                    281: - RPL/2 can now be cross compiled (until .deb archive generation);
1.109     bertrand  282: - all table, vector and matrix dimensions are now treated as unsigned long;
1.108     bertrand  283: - recherche_type() function is modified to use cached memory;
                    284: - gnuplot is upgraded to 4.6.0.
1.107     bertrand  285: * Wed Feb 29 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.6 (RPL/2)
                    286: - serial line support is added to OPEN (STTY options);
1.106     bertrand  287: - multiline inputs are allowed:
                    288: schroedinger:[~/cvs/build/src] > rpl -is
                    289: +++RPL/2 (R) version 4.1.6 (Monday 01/30/12, 10:20:38 CET)
                    290: +++Copyright (C) 1989 à 2011, 2012 BERTRAND Joël
                    291: 
                    292: +++Ce logiciel est un logiciel libre sans aucune garantie de fonctionnement.
                    293: +++Pour plus de détails, utilisez la commande 'warranty'.
                    294: 
                    295: RPL/2> [[ 1 2 3 ]
                    296: + 001> [ 4 5 6 ]
                    297: + 002> [ 7 8 9 ]]
                    298: 
                    299: 1: [[ 1 2 3 ]
                    300:     [ 4 5 6 ]
                    301:     [ 7 8 9 ]]
                    302: RPL/2> [[ 1 23 ]
                    303: + 001> [ 4 5 6 ]]
                    304: +++Erreur : Erreur de syntaxe [19267]
                    305: 
                    306: 1: [[ 1 2 3 ]
                    307:     [ 4 5 6 ]
                    308:     [ 7 8 9 ]]
                    309: RPL/2> [ 1 2 3
                    310: + 001> annulation
                    311: RPL/2> abort
                    312: 
                    313: 'annulation' is done by pressing CTRL+g, and abort by CTRL+d on empty line.
1.104     bertrand  314: * Tue Jan 17 2012 BERTRAND Joël <rpl@systella.fr> rpl-4.1.5 (RPL/2)
                    315: - ncurses, sqlite and openssl have been upgraded;
1.103     bertrand  316: - major bug is fixed in ** (integer integer **) when first argument is equal to
                    317: -1;
1.102     bertrand  318: - major bug is fixed in signal management. With new signal management, thread or
                    319: process were not signalized anymore by POSIX signals. If a thread or a process
                    320: was sleeping, it was not interrupted;
1.101     bertrand  321: - minor bug is fixed in OPEN intrinsic. Now, when a socket is open, its default
                    322: adress is set to 0.0.0.0;
1.105     bertrand  323: - new rule is added to main makefile (make debian) to build deb package;
1.100     bertrand  324: - new benchmark (Xeon W3520 @ 2.67GHz) :
                    325: schroedinger:[~/cvs/bench] > ./bench.rpl 
                    326: +++RPL/2 (R) version 4.1.5 (Friday 12/02/11, 12:18:23 CET)
                    327: +++Copyright (C) 1989 à 2010, 2011 BERTRAND Joël
                    328: Number of scalar operations per second and per core : 3809121.83444626
                    329: schroedinger:[~/cvs/bench] > 
1.99      bertrand  330: - recherche_type() did not convert huge integer in real. Now,
                    331: 18446744072742037448 is converted into real as value cannot be stored in
                    332: RPL/2 integer type;
                    333: - WFSOCK is modified to handle unconnected sockets;
1.98      bertrand  334: - REGEX is added;
1.97      bertrand  335: - RESTART is added (execvp() on main RPL/2 process);
1.95      bertrand  336: - copie_objet() now returns same MTX (struct_mutex) even if caller wait for
                    337: a real copy. Now, struct_mutex contains locks owner. On Linux or Solaris (for
                    338: example), it is possible to lock mutex from a thread and unlock the same mutex
                    339: from another thread. On NetBSD, system crashes.
1.94      bertrand  340: * Mon Nov 21 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.4 (RPL/2)
                    341: - rplcas/@GIAC@/src/config.h is removed to avoid compilation bug. config.h
                    342: written by configure script was overloaded by src/config.h;
1.95      bertrand  343: - lot of compilation warnings have been fixed;
1.94      bertrand  344: - lapack and blas have been upgraded;
1.93      bertrand  345: - ncurses, sqlite and giac have been upgraded;
                    346: - LCASE, UCASE, POS and SUB now handle escape characters;
1.91      bertrand  347: - major bug is fixed in INT (numerical integration was unusable as type
                    348: checking condition was always false);
1.90      bertrand  349: - SIZE, CHR and NUM can handle strings with escape characters;
1.89      bertrand  350: - lot of patches for Android and OS/2;
                    351: - configure.ac is improved to remove operating systems special cases.
1.88      bertrand  352: - major bug is fixed in DRWS (SDAT was not used...);
                    353: - lists, and integer, real and complex numbers can now be written in
                    354: unformatted files;
                    355: - rplawk makefile is fixed to avoid build process bug. Warning, with these
                    356: modifications, sources tree has to be writable.
1.86      bertrand  357: * Wed Sep 21 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.3 (RPL/2)
1.85      bertrand  358: - Linux port, MacOS X port and xBSD ports are tested and fully fonctionnal;
1.84      bertrand  359: - libsigsegv is added;
                    360: - OpenMotif is added;
                    361: - all internal signal handlers are rewritten to avoid POSIX signal usage
                    362: and to be async signal safe;
1.83      bertrand  363: - SIGSEGV signal handler is rewritten;
1.80      bertrand  364: - SREV intrinsic is added.
1.79      bertrand  365: * Tue Aug 9 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.2 (RPL/2)
1.81      bertrand  366: - I have fixed a lot of bugs in gpp preprocessor (and sent gpp 3.0 to official
1.78      bertrand  367: gpp developer). Now, macros like
                    368: 
                    369:    #define foo foo bar
                    370: 
                    371: is evaluated without recursion. gpp 2.24 crashed on stack overflow.
1.77      bertrand  372: - LIMIT is added;
1.76      bertrand  373: - Now, undefined values like 'infinity/infinity' are computed. Result is
                    374: undef constant;
1.75      bertrand  375: - infinity constant is added.
1.73      bertrand  376: * Sun Jul 24 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.1 (RPL/2)
1.74      bertrand  377: - VERSION now returns OS type, architecture and ABI;
1.73      bertrand  378: - configure script is updated. New flags :
                    379:     --with-32bits-abi
1.88      bertrand  380:     --with-64bits-abi
                    381:     --with-rplcas
1.73      bertrand  382: Please not that RPL/CAS is not built by default;
1.72      bertrand  383: - Lapack is upgraded to 3.3.1.
1.71      bertrand  384: * Mon Jun 27 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.0 (RPL/2)
                    385: - New stable release.
1.70      bertrand  386: * Fri Jun 22 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.0.prerelease.4 (RPL/2)
1.71      bertrand  387: - some minor changes have been done in instruction_int() to accept new argument
                    388: types;
                    389: - interface_cas.cpp now catchs exceptions returned by giac.
1.70      bertrand  390: * Fri Jun 24 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.0.prerelease.3 (RPL/2)
                    391: - INT intrinsic now uses RPLCAS to compute symbolic integration;
1.69      bertrand  392: - minor bug is fixed in INTRINSIC function. Now, this function gives same
                    393: result with ou without -p switch.
1.68      bertrand  394: * Wed Jun 22 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.0.prerelease.2 (RPL/2)
1.67      bertrand  395: - memory caching is added to new variable tree.
1.66      bertrand  396: * Tue Jun 21 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.0.prerelease.1 (RPL/2)
                    397: - SPAWN is now usable with new variable management;
1.65      bertrand  398: - MEM is rewritten;
                    399: - PRUSR is rewritten;
                    400: - merge 4_0 branch into HEAD;
                    401: - CLUSR is rewritten;
                    402: - -p flag is now usable;
                    403: - New benchmark:
                    404: cauchy:[~/rpl/bench] > ./bench.rpl 
                    405: +++RPL/2 (R) version 4.1.0.prerelease.1 (lundi 20/06/2011, 23:00:45 CEST)
                    406: +++Copyright (C) 1989 à 2010, 2011 BERTRAND Joël
                    407: Number of scalar operations per second and per core : 2625369.22710792
1.64      bertrand  408: * Mon Jun 20 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.1.0.prerelease.0 (RPL/2)
                    409: - New variable management is written. Please note that -p flag does not work
                    410: and all multithread/multitask capabilities have been disabled until this
                    411: new subsystem shall be validated.
                    412: * Thu May 09 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.0.23 (RPL/2)
                    413: - major bug is fixed in STD format (1E7 sq prints 1);
                    414: - major bug is fixed in READ intrinsic (socket). This bug was introduced
                    415: by a new feature in glibc.
                    416: * Thu Apr 14 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.0.22 (RPL/2)
                    417: - by default, RPL/2 uses "NONE" IMPLICIT when it's started in batch mode and
                    418: "ALL" IMPLICIT when it runs in interactive mode;
                    419: - when "NONE" IMPLICIT is set, STO intrinsic raises an error when it is used
                    420: to create or modify a global variable. Now, with "NONE" IMPLICIT, you have
                    421: to use SAVE to manipulate global variables;
                    422: - replace erroneous TAB by TBL in evaluation() and formateur_fichier()
                    423: subroutines;
                    424: - fix major memory access violation in evaluation subroutine. Only occurs
                    425: when 'X(i,j)' is evaluated on a matrix and when (i,j) points out of bounds;
                    426: - fix major bug in evaluation subroutine. 'X(i)' returns execution error
                    427: when X was a vector or a table.
1.63      bertrand  428: * Sun Apr 04 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.0.21 (RPL/2)
                    429: - Gnuplot is upgraded;
1.62      bertrand  430: - flag 34 is now used to enable or disable control character evaluation;
                    431: - major bug is fixed in P->R intrinsic function when argument type is
                    432: complex and degree mode is set;
                    433: - L->T and T->L are added;
1.63      bertrand  434: - OLD filetype is fixed;
1.61      bertrand  435: - FLOW socket support is added;
                    436: - FLOW sequential files are added;
                    437: - new escape sequence is added to handle flow files (\x + hexadecimal code).
                    438: Known escape sequences are \", \b, \n, \t, \x?? and \\.
1.60      bertrand  439: * Sun Mar 06 2011 BERTRAND Joël <rpl@systella.fr> rpl-4.0.20 (RPL/2)
                    440: - Ncurses is upgraded to 5.8;
                    441: - ALARM is fixed by filling isdst field;
                    442: - catch ECONNRESET in write intrinsic to return an execution error instead of
                    443: system one;
                    444: - fix a typo in HELP intrinsic;
                    445: - Openssl is upgraded to 1.0.0d, sqlite to 3.7.5 and readline to 6.2;
1.57      bertrand  446: - Lapack is upgraded to 3.3.0;
1.58      bertrand  447: - libmtmalloc is now default Solaris allocator;
1.56      bertrand  448: - ncurses is upgraded;
1.60      bertrand  449: - regression introduced by 4.0.19 is fixed in signal management.
1.59      bertrand  450: Interruption1() could be called from itself and raises bus error (on sparc) or
1.55      bertrand  451: segmentation fault;
                    452: - sqlite is upgraded to 3.7.4;
1.54      bertrand  453: - OpenSSL is upgraded to 1.0.0c;
                    454: - syntax error is correctly checked ( (2+,0) does not crash RPL/2 anymore);
                    455: - characters are tested in recherche_type() to avoid names like '12+';
1.53      bertrand  456: - gnuplot is upgraded to 4.4.2 due to major bugs.
1.52      bertrand  457: * Thu Sep 23 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.19 (RPL/2)
                    458: - due to a very strange bug I've only seen on Solaris, ptmalloc3 is removed.
                    459: Solaris libresolv randomly uses ptmalloc3 and system allocator and makes heap
                    460: corruption. As internal memory management have been improved, a best fit
                    461: allocator like ptmalloc3 is not required anymore;
1.50      bertrand  462: - gnuplot is upgraded to 4.4.1;
                    463: - deadlock is fixed in signal handlers: same mutex was used in standard
                    464: subroutines (without protected sections by sigprocmask() or pthread_sigmask())
                    465: and signal handlers. A new signal handler specific mutex is added;
                    466: - minor bug is fixed in evaluation() subroutine. In { X 0 PI }, PI is a function
                    467: that has to be evaluated by ->NUM;
1.49      bertrand  468: - rplfile build process is modify to be sure that rplfile is not modified
                    469: after rpl build stage (to be sure that rplfile checksum is not modified after
                    470: rpl compilation);
1.51      bertrand  471: - AWK is replaced by rplawk. rplawk is original awk written by Brian Kernighan,
                    472: modified to remove yacc code and renamed;
1.47      bertrand  473: - some workarounds have been written to not use buggy klibc SystemV IPCS.
                    474: ABORT now works on eComStation;
                    475: - sqlite is upgraded to 3.7.2;
                    476: - bug is fixed in software interrupts. When both process have different PID,
                    477: parent process was not interrupted if it is not group master process. To fix
                    478: this bug, SIGINJECT signal is not sent by child process but by control thread
                    479: in parent process;
1.46      bertrand  480: - minor bug is fixed in data injection (POKE) that does not work as expected
                    481: when child process is protected by NRPROC.
1.44      bertrand  482: * Thu Aug 26 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.18 (RPL/2)
1.43      bertrand  483: - --enable-sysv-sems is added to configure script to use SystemV semaphores
                    484: functions instead of POSIX functions. This function is disabled or forced on
                    485: systems that does not provide correct POSIX or SysV semaphores subsystem;
                    486: - a dirty but not quick patch is written to workaround broken siginfo
                    487: structures. This patch has been successfully tested. It uses a segment of
1.50      bertrand  488: shared memory (Posix or SysV) and some semaphores (Posix or SysV) by process
1.43      bertrand  489: (Unix PID);
1.41      bertrand  490: - some OpenBSD's hacks are added;
                    491: - broken siginfo->si_pid field is now checked by configure script;
1.40      bertrand  492: - SWI now sends SIGCONT to interrupted process to start interrupt without delay;
                    493: - random generator is cloned by SPAWN;
                    494: - in transliteration subroutine : '\r' is added after all '\n' in OS/2 port;
1.39      bertrand  495: - getaddrinfo is hardcoded when host system does not provide getaddrinfo
1.40      bertrand  496: or freeaddrinfo;
1.39      bertrand  497: - RPL/2 can now use SystemV semaphores when POSIX semaphores are unavailable;
                    498: - major bug is fixed in CHR intrinsic when obtained character is not printable;
                    499: - Lapack is upgraded to 3.2.2;
1.37      bertrand  500: - OS/2 (eComStation 2.0 with EMX 0.9d) support is added;
1.36      bertrand  501: - TOKENIZE is now able to convert escape sequences;
                    502: - ATPOKE and CLRATPOKE new intrinsics are added;
                    503: - --enable-full-static configure flag is added. With this flag, mysql and
                    504: postgresql libraries are statically linked in rpl executable;
                    505: - units Makefile is modified to avoid readline and ncurses usages;
1.37      bertrand  506: - sqlite is upgraded to 3.7.0.1;
1.36      bertrand  507: - units is upgraded to 1.88;
                    508: - another major bug is fixed in the same variable creation subroutine.
                    509: Level 0 and 1 variables adresses were swapped when a global variable masked
                    510: a name of RPL/2 routine;
1.35      bertrand  511: - major bug is fixed in global variable creation subroutine. When a global
                    512: variable was created and when a local variable existed with the same name,
                    513: computed address of global variable was wrong;
                    514: - src/Makefile.am is modified to avoid a bug on several systems. libptmalloc3
                    515: is forced in front of all libraries.
1.34      bertrand  516: * Tue Jul 13 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.17 (RPL/2)
                    517: - BACKTRACE intrinsic is added;
                    518: - major bug is fixed in SELECT/DEFAULT/END conditional structure. Only occurs
                    519: when this structure is included in IFERR/THEN/END structure and when an error is
                    520: caught;
                    521: - major bug is fixed in analyse() subroutine. When evaluation() returned error
                    522: in a compiled program, analyse() caught this error twice and randomly aborted
                    523: with a segmentation error;
                    524: - TRIM and TOKENIZE replace both '\n' and '\t' by regular spaces;
                    525: - ATEXIT subroutine begins with an implicit CSTOP to avoid multiple stop
                    526: signals;
                    527: - memory leak is fixed in ROW+. It only occurs when a row is added to an empty
                    528: matrix.
1.33      bertrand  529: * Thu Jun 24 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.16 (RPL/2)
                    530: - minor bug is fixed in evaluation() subroutine. With this patch, same program
                    531: returns same result with or without -p flag;
                    532: - ncurses 5.7 is upgraded to 20100619;
                    533: - openssl is upgraded to 1.0.0a;
1.32      bertrand  534: - interrupt stacks are now FIFO instead of LIFO;
                    535: - debug memory allocation subroutines are improved to run in multithreaded
                    536: programs;
                    537: - some memory leaks are fixed in process management (SPAWN and DETACH);
                    538: - version verification is added to shared objects;
                    539: - -D_GNU_SOURCE is added to ptmalloc3 makefile to avoid a major bug on 64 bits
                    540: linux (false mremap() prototype);
                    541: - major bug is fixed in rpliconv. getc() returns an int, not a unsigned char.
1.30      bertrand  542: * Sun May 23 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.15 (RPL/2)
1.29      bertrand  543: - all '-' are replaced by '_' in random generator list;
1.28      bertrand  544: - minor memory leak is fixed in OPEN intrinsic (socket);
                    545: - major bug is fixed in IFERR structure. Only occurs in compiled program;
                    546: - major bug is fixed in copie_objet() and liberation(). Only concerns
                    547: format in FCH (file descriptor) and SCK (socket descriptor);
                    548: - debug routines are improved;
                    549: - PROCID is added;
                    550: - MEMLOCK and MEMUNLOCK are added. MEMLOCK forces a process to remain in memory
                    551: and to not use swap;
1.26      bertrand  552: - major bug is fixed in sql support. SQL connections were closed in all chield
                    553: process;
                    554: - standard allocator (malloc()/free()) is replaced by ptmalloc3 due to some bugs
                    555: discovered in Solaris thread safe allocators (libmalloc and libumem) that
                    556: are first fit class allocators. Solaris libmtmalloc works better and is
                    557: a best fit class allocator but its performance is poor than ptmalloc3
                    558: performance;
1.24      bertrand  559: - major bug is fixed in ROW+ intrinsic (new row was not added where it
                    560: should);
                    561: - minor bugs are fixed in interruptions.c (semaphores values when error is
                    562: caught);
                    563: - major bug is fixed in STOP intrinsic. STOP was unable to stop any process
                    564: created by SPAWN;
                    565: - SIGFABORT is added. When process receives SIGFSTOP, it tries to execute
                    566: ATEXIT. If it receives SIGFABORT, it does not;
1.23      bertrand  567: - ONEXIT is renamed in ATEXIT;
                    568: - ONEXIT new intrinsic is added.
1.20      bertrand  569: * Wed Apr 21 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.14 (RPL/2)
                    570: - major bug is fixed in static and shared variables initialization subroutine.
                    571: This bug only occurs when RPL/2 tries to create a shared or static variable
                    572: from an expression;
                    573: - major bug is fixed in copie_etat_processus(). A field that contains
                    574: information about shared variable was not copied to new processus structure;
1.19      bertrand  575: - some little memory leaks are fixed in evaluation(), recherche_type() and
                    576: sequenceur(). They only occured when syntax error were caught;
                    577: - IMPLICIT causes execution error instead system error;
                    578: - Hurd support is improved but currently broken because Hurd does not support
                    579: SIG_INFO. Work in progress;
                    580: - OpenBSD specific support is removed from sources;
                    581: - support for Mac OS X and Windows/Cygwin is added.
1.17      bertrand  582: * Wed Apr 07 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.13 (RPL/2)
                    583: - implicit names can now be disabled by new IMPLICIT intrinsic:
                    584: cauchy:[~/cvs/test] > cat implicit.rpl
                    585: #!/usr/local/bin/rpl -sp
                    586: TEST
                    587: <<
                    588:     "none" implicit
                    589: 
                    590:     1 -> Z
                    591:     <<
                    592:         Z disp
                    593:         'Z' disp
                    594:     >>
                    595: 
                    596:     'Z' disp
                    597:     Z disp // Undefined
                    598: >>
                    599: 
                    600: cauchy:[~/cvs/test] > LANG=C ./implicit.rpl
                    601: +++RPL/2 (R) version 4.0.13 (Wednesday 04/07/10, 13:57:44 CEST)
                    602: +++Copyright (C) 1989 to 2009, 2010 BERTRAND Joel
                    603: 1
                    604: 'Z'
                    605: 'Z'
                    606: +++System : Invalid implicit name [6631]
                    607: cauchy:[~/cvs/test] > 
                    608: 
                    609: RPL/2 aborts because the last Z is undefined and not protected by ''.
                    610: By default, implicit is set to "ALL";
1.16      bertrand  611: - sqlite is upgraded to 3.6.23.1;
                    612: - openssl is upgraded to 1.0.0;
                    613: - major bug is fixed in RETURN intrinsic. It only occurs in evaluation
                    614: subroutine;
                    615: - table variable can now be sorted by SORT;
                    616: - some regressions between libtool 1.x and 2.x are fixed by workarouds in
                    617: Makefiles;
1.15      bertrand  618: - -a command line option analyzes program (structure and syntax) and
                    619: sends preprocessor output to standard output. This option is used by
                    620: rplc (RPL/2 compiler).
1.13      bertrand  621: * Tue Mar 09 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.12 (RPL/2)
                    622: - in formatted file, string format returned a variable length string even if
                    623: format was 'CHARACTER*(n)' (n characters string). Now, 'CHARACTER*(*)' returns
1.15      bertrand  624: a variable length string and 'CHARACTER*(n)' a fixed length string;
1.13      bertrand  625: - keyed access files support is added. Currently, only formatted files are
                    626: supported;
                    627: - direct access files support is added. Currenlty, these files can only be used
                    628: in formatted mode;
                    629: - virtual variables are now writte in UTF-8 and all special characters
                    630: in string are escaped;
1.12      bertrand  631: - all formatted files are now converted into UTF-8;
1.17      bertrand  632: - all file and unix socket names created by RPL/2 are now UTF-8 compliant;
1.12      bertrand  633: - RPL/2 tools (rpliconv, rplfile, rplpp and rplconvert) are now checked before
                    634: each execution (md5 and sha1 sums) to enhance security. If one of these tools
                    635: have been modified between RPL/2 compilation and current execution, RPL/2 aborts
                    636: on a non recoverable system error;
                    637: - openssl and sqlite3 libraries are added;
                    638: - RPL_HOME env variable is added. When RPL/2 is called from librpl, this
                    639: variable indicates RPL/2 root directory. If it is not set, root path
                    640: is given by configure script (d_exec_path);
1.11      bertrand  641: * Thu Mar 03 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.11 (RPL/2)
                    642: - configure.in and makefile.am's are modified to add Cygwin support. Interix
                    643: support is broken;
1.10      bertrand  644: - memory leak is fixed in recherche_type();
                    645: - TeX files are now written in UTF-8 even default locale differs;
                    646: - minor bug is fixed in ->STR (escaped characters);
1.9       bertrand  647: - minor bug is fixed in ->Q intrinsic. Resultat is returned as integer
                    648: fraction intead real one;
                    649: - SIGN now returns (0,0) instead (nan,nan) when complex argument is null;
1.8       bertrand  650: - Makefile.am are modified to authorize parallel builds;
1.7       bertrand  651: - minor bug is fixed in CR intrinsic. CR sends a carriage return to printer
                    652: and writes warning to standard output;
1.6       bertrand  653: * Wed Feb 10 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.10 (RPL/2)
1.5       bertrand  654: - escape codes are now converted in formateur(), not in recherche_type() to
                    655: avoid a minor bug in EDIT and VISIT intrinsics;
1.4       bertrand  656: - minor bug is fixed in formateur_reel();
1.7       bertrand  657: - file-5.03 is patched to avoid bus error on systems that require memory
1.3       bertrand  658: alignment;
1.2       bertrand  659: - minor bug is fixed in evaluation(). Error returned by RPL/C external functions
                    660: were able to be avoided by evaluation routine.
1.1       bertrand  661: * Tue Jan 26 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.9 (RPL/2)
                    662: - New benchmark on same hardware than old one :
                    663: cauchy:[~/rpl/bench] > ./bench.rpl 
                    664: +++RPL/2 (R) version 4.0.9 (samedi 23/01/2010, 18:06:08 CET)
                    665: +++Copyright (C) 1989 à 2009, 2010 BERTRAND Joël
                    666: Number of scalar operations per second and per core : 2383016
                    667: 
                    668: - PULPRFL does not abort on BUG() but on execution error;
                    669: - TRIM, REPL and TOKENIZE are added;
                    670: - sockets options are now set before bind();
                    671: - shutdown() is added to all connected sockets;
                    672: - minor bug is fixed in SUB intrinsic (segfault when SUB is called with
                    673: list argument and inexistant elements).
                    674: * Fri Jan 08 2010 BERTRAND Joël <rpl@systella.fr> rpl-4.0.8 (RPL/2)
                    675: - minor bug is fixed in DAEMON intrinsic. When a program was daemonized, all
                    676: signals sent to main process were not caught because DAEMON did not replace
                    677: old pid by new one;
                    678: - major bug is fixed in IFERR/THEN/ELSE/END. Only occurs in expression
                    679: evaluation when an error is reported from a subroutine in another subroutine.
                    680: For example, error was not caught in following program when it is executed with
                    681: -p option :
                    682:    TEST << iferr TEST2 then end >>
                    683:    TEST2 << 0 inv >>
                    684: - major bug is fixed in variable management. Some local variables were
                    685: seen as global ones;
                    686: - major bug is fixed in rplcore. Rplcore entered in dead lock when
                    687: script file contains a multibyte character;
                    688: - IN intrinsic is added;
                    689: - major bug is fixed in SAME intrinsic : << 1 >> DUP SAME and 'E' DUP SAME
                    690: returned false ;
                    691: - major bug is fixed in RETURN intrinsic. It only occurs in compiled
                    692: programs;
                    693: - major bug is fixed in NEG intrinsic. NEG did not make a copy of its arguments;
                    694: - regression is fixed in compilation(). "\\" was analysed as '"' '\' '\"' and
                    695: strings were never closed;
                    696: - some bugs have been fixed in file management;
                    697: - RPL/2 can now be run on EBCDIC systems (OS/390);
                    698: - major bug is fixed in -A command line option (NULL character is missing);
                    699: - minor bug is fixed in rpliconv and RECODE intrinsic. All transliterations are
                    700: made by blocks (1024 bytes). When an incomplete multibyte sequence is
                    701: encountered at end of block, subroutine aborts with an execution error;
                    702: - major bug is fixed in OPEN (TCP/IPv4 sockets).
                    703: * Mon Nov 30 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.7 (RPL/2)
                    704: - DISP now locks stdout;
                    705: - rpliconv is added to replace standard iconv provided by operating system.
                    706: Indeed, conversion between different encodages requires transliteration
                    707: that is not offered by some iconv utility;
                    708: - CURRENC and RECODE intrinsics have been written to allow strings conversions;
                    709: - bug is fixed in SYSEVAL. When execvp() returns (for example when arg[0] can
                    710: not be found), SYSEVAL enters in a dead lock;
                    711: - fprintf is replaced by some functions that allow transliterations between
                    712: locales;
                    713: - '"' can now be used in strings ("\"");
                    714: - iconv is called with -c in preprocessor stage. It is done to write
                    715: CGI scripts with RPL/2 because locale charset is set to ANSI_X3.4-1968;
                    716: - double free is fixed in liberation() (type SQL, only occurs when locale is
                    717: set);
                    718: - LOCALIZATION, UCASE and LCASE are added;
                    719: - major bug is fixed in EXIT intrinsic that was able to return a false
                    720: execution error in compiled scripts (only in DO/UNTIL and REPEAT/WHILE loops);
                    721: - major bug is fixed in wrapper_instruction_intrinseque(). When intrinsic() was
                    722: used in onLoading from shared library, USE was pushed on stack as algebraic
                    723: expression;
                    724: - libiconv is upgraded to 1.13.1;
                    725: - gnuplot is upgraded to 4.2.6;
                    726: - gsl is upgraded to 1.13.
                    727: * Mon Sep 28 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.6 (RPL/2)
                    728: - pipe() is overwritten by a macro to avoid a system error. Communication
                    729: between process are done with pipes and these pipes are managed by a
                    730: specific asynchrone thread. If a script try to create more threads than
                    731: management thread can destroy, you can quickly achieve maximum number of
                    732: opened files and pipe() shall return a system error. This macro tries to create
                    733: pipes. If pipe() function returns an error, macro waits and retries. If
                    734: number of retries is greater than a hardcoded value, macro returns an error;
                    735: - major bug (deadlock) is fixed in process and thread management. I hope
                    736: this bug shall be the last one;
                    737: - major bug is fixed in DET intrinsic (determinant was computed without LU
                    738: diagonalization);
                    739: - SWAPCNTXT is added;
                    740: - minor bug is fixed in Makefile.am (licences rule).
                    741: * Wed Sep 09 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.5 (RPL/2)
                    742: - some bugfixes are added in process management;
                    743: - all process management is rewritten to avoid usage of defunct process
                    744: or thread number;
                    745: - new major bug is fixed in interruptions.c. Sometimes, when retrait_thread()
                    746: was called before a pending interruption5 (SIGFSTOP), signal handler uses
                    747: a freed semaphore and corrupts heap;
                    748: - CLRERR is added to erase previous errors;
                    749: - ERRN and ERRM return exception message and number;
                    750: - major bug is fixed in interruptions.c. All signal are now bufferised
                    751: when semaphore_liste_threads is null to avoid deadlock. This bug only
                    752: occured when STOP was sent to a dying thread or process (when this thread or
                    753: process was running retrait_thread());
                    754: - matrix rank is computed before matrix inversion;
                    755: - file locks are added to stdin and stdout. stderr is not locked because
                    756: all messages written by signal handlers are sent to stderr;
                    757: - configure.in script is modified to test gcc version and avoid a bug in
                    758: gcc older than 4.4;
                    759: - some benchmarks have been done :
                    760: 
                    761: cauchy:[~/rpl/bench] > ./bench.rpl 
                    762: +++RPL/2 (R) version 4.0.5 (mardi 04/08/2009, 18:23:07 CEST)
                    763: +++Copyright (C) 1989 à 2008, 2009 BERTRAND Joël
                    764: Number of scalar operations per second and per core : 2109867
                    765: 
                    766: Workstation :
                    767: cauchy:[~/rpl/build] > uname -a
                    768: Linux cauchy 2.6.30.1 #1 SMP PREEMPT Thu Jul 16 09:49:46 2009 x86_64 GNU/Linux
                    769: cauchy:[~/rpl/build] > cat /proc/cpuinfo | grep "model name"
                    770: model name      : Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
                    771: model name      : Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
                    772: cauchy:[~/rpl/build] > gfortran -v 2>&1 | grep "gcc version"
                    773: gcc version 4.3.3 (Debian 4.3.3-14) 
                    774: cauchy:[~/rpl/build] >
                    775: 
                    776: - SVL and SVD are added;
                    777: - COND and RANK are added;
                    778: - DIAG-> and ->DIAG are added;
                    779: - major bug is fixed in DET intrinsic. DET is rewritten to avoid usage of
                    780: eigenvalues. In a first time, matrix rank is estimated to force determinant
                    781: to zero if matrix is rank deficient. If not, a PLU decomposition is done to
                    782: compute determinant;
                    783: - QR matrix decomposition is added;
                    784: - LQ matrix decomposition is added;
                    785: - Fortran90 files are rewritten to use Fortran2003 bind(C) statement and
                    786: Fortran preprocessor;
                    787: - default compilation options are now -Wall -Wextra -Wno-pointer-sign
                    788: -Wno-unused-parameter;
                    789: - all mathematical exceptions are now signaled by exceptions instead of
                    790: execution error;
                    791: - minor bug is fixed in both CSTOP and RSTOP intrinsics. Without this fix, you
                    792: can call twice CSTOP without RSTOP;
                    793: - named semaphore support is added (CRSMPHR, CLRSMPHR, SMHRDECR, SMPHRINCR,
                    794: SMPHRTRYDECR, SMPHGETV).
                    795: * Fri Jul 24 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.4 (RPL/2)
                    796: - semaphore is added in interruptions.c to avoid segmentation fault when STOP
                    797: signal is sent to a dying thread. Some mutexes are replaced by semaphores too
                    798: to be used in signal handlers;
                    799: - major bug (memory corruption) is fixed in COL- intrinsic;
                    800: - minor bug is fixed in ALARM and WAIT. These temporisations stopped when a
                    801: software interrupt was caught;
                    802: - rplpp man page is added.
                    803: * Fri Jul 17 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.3 (RPL/2)
                    804: - minor bug is fixed in WRITE (SIGPIPE is ignored to catch error without
                    805: process termination);
                    806: - major bug is fixed in FUSE intrinsic (FUSE kills itself and do not kill
                    807: its parent);
                    808: - a mutex to protect fork() syscall is added;
                    809: - all mutexes are unlocked after fork() in DETACH;
                    810: - minor bug (double free corruption) is fixed in CLOSE intrinsic;
                    811: - major bug is fixed in lecture_pipe when a nullified list is sent into a pipe;
                    812: - WORKDIR intrinsic is added;
                    813: - Level 0 variables are shared between all threads without copy. Indeed,
                    814: there variables are not modifiable and only contains static user definitions;
                    815: - branches prediction is added in THEN, ELSE, ELSEIF and REPEAT intrinsics;
                    816: - FORTRAN 77 file management subroutines are rewritten in pure C due to
                    817: FORTRAN string management. C/FORTRAN 77 string interfaces are broken
                    818: in some cases (gcc/gfortran/libc/OS and arch conjonction);
                    819: - a memory leak is fixed in REMOVE intrinsic;
                    820: - major bug is fixed in MySQL driver (segfault due to a bug in mysql_init()
                    821: and due to a libmysqlclient that is not thread safe).
                    822: * Wen Jun 10 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.2 (RPL/2)
                    823: - new enhanced allocator is written for regular variables, static variables and
                    824: shared variables;
                    825: - major bug is fixed in src/interruptions.c. This file did not compile
                    826: when SQL support was not enabled;
                    827: - new allocator is written for system stack and last stack;
                    828: - --enable-profile flag is added to configure script. When this flag is
                    829: enabled, rpl is built with -pg option;
                    830: - SIGFSTP (from Solaris'TERMIO) is caught. On Solaris 10, all process receive
                    831: SIGFSTP (with a nullified siginfo structure) instead of SIGHUP when control
                    832: process is killed;
                    833: - abs() macro is modified to avoid multiple evaluation. Your C compiler has to
                    834: know typeof() intrinsic function. This function is not standard but exists
                    835: under Sun Studio, gcc, and maybe some others compilers. If this function does
                    836: not exist on your compiler, you can change its definition by old one in
                    837: src/rpl.h;
                    838: - fflush() can now be interrupted by signal (SunOS);
                    839: - fflush(NULL) is called before all fork() occurrences;
                    840: - generators returned by RDGN help are sorted;
                    841: - Lapack is now 3.2.1.
                    842: * Mon May 18 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.1 (RPL/2)
                    843: - bug is fixed in src/generateurs_aleatoires.awk. It only occurs when RPL/2 is
                    844: built under Solaris.
                    845: * Wed May 5 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0 (RPL/2)
                    846: - major bug is fixed in matrix inversion (due to an inversion between pointer
                    847: and object copies);
                    848: - RDGN is added to use some different random number generators. See HELP RDGN;
                    849: - code analysis is rewritten from scratch to be more efficient and mode
                    850: expandable;
                    851: - minor bug (segfault in interruption1) is fixed. It only occurs on Solaris
                    852: that can returns a nullified siginfo pointer when SIGINT is sent by kernel
                    853: keyboard driver;
                    854: - gnuplot is now 4.2.5;
                    855: - readline is upgraded to 6.0;
                    856: - file is upgraded to 5.0;
                    857: - Signal handlers are rewritten to send signal to main thread when a signal
                    858: is send from an external process;
                    859: - configure.in is modified to avoid a libc bug on Solaris (free() can enter in
                    860: deadlock when a huge amount of threads is launched);
                    861: - minor bug is fixed in boath START and FOR intrinsic. Only occurs when
                    862: arguments types are unsupported;
                    863: - PLOT instrinsic is added (usage: LINE and MARK do not draw anything. All
                    864: data are buffered. PLOT is used to draw these objects.);
                    865: - MARK instrinsic is added;
                    866: - new allocator mechanism is written;
                    867: - some regression bugs have been fixed, some memory leaks too.
                    868: * Wed Jan 28 2009 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.9 (RPL/2)
                    869: - an estimation of future stack elements is added to avoid some costly memory
                    870: allocations. This function has a positive impact on execution speed;
                    871: - PSHPRFL and PULPRFL have been added;
                    872: - RPL/2 can be built on Solaris 64 bits with some minor scripts alterations.
                    873: See README for more explanations;
                    874: - MTXSTATUS intrinsic is added;
                    875: - YIELD intrinsic is added;
                    876: - ERRM is fixed. In some cases, ERRM uses some uninitialized pointers;
                    877: - SHARED and PRIVATE intrinsics have been added. A shared variable is a
                    878: static variable that is shared by multiple threads;
                    879: - '->' intrinsic is improved. All object copies have been avoided;
                    880: - -n flag is added to catch HUP signal. stderr and stdout are redirected
                    881: to a file, stdin is redirected to /dev/null when control process is killed;
                    882: - a mutex is added to each object (before this modification,
                    883: RPL/2 used a global mutex and performances in multithreaded programs were very
                    884: poor.);
                    885: - ALARM is now interruptible;
                    886: - both PUT and PUTI intrinsics are improved and do not copy list and table
                    887: when nombre_occurrences == 1;
                    888: - COPY intrinsic is added. Argument (that can be pointed from some objects)
                    889: is replaced by a new copy of itself;
                    890: - memory leak is fixed in sequenceur(). It only occurs when an execution error
                    891: is caught from interactive mode;
                    892: - mutexes have been added (CRMTX, CLRMTX, MTXLOCK, MTXUNLOCK);
                    893: - new mutex type is added;
                    894: - profile statistics have been added. See -P option;
                    895: - major bug is fixed in analyse_syntaxique();
                    896: - new SQL type is added;
                    897: - due to a trouble in libpq in multithreaded context, SQL intrinsic is split
                    898: in three new intrinsics : SQLCONNECT, SQLQUERY and SQLDISCONNECT. Please note
                    899: that all programs that worked with old SQL intrinsic can now work with
                    900: SQLQUERY. With all new programs, you can open a real connection to databases;
                    901: - NRPROC is added. This new intrinsic is used to catch error from child
                    902: process. Without NRPROC, any errors returned by child process cause
                    903: main process to abort;
                    904: - SPAWN is added. This new intrinsic is used to launch a new thread (DETACH
                    905: starts a new process). There are no mutexes in RPL/2 because all spawned process
                    906: use specific context. Nevertheless, shared variables and associated mutexes
                    907: should be added;
                    908: - -D flag and DAEMONIZE intrinsic have been added;
                    909: - REPEAT, THEN, ELSE and ELSEIF intrinsics are rewritten to be more efficient;
                    910: - autoconf script is modified to handle mysql and postgresql on non standard
                    911: directories;
                    912: - -t flag is fixed ('\0' is missing...);
                    913: - SWI and SEND pipes have been modified to be more robust on systems where
                    914: getpid() can return (pid_t) -1 or (pid_t) -2 value;
                    915: - major bug is fixed in REPEAT intrinsic. Only occurs in compiled mode;
                    916: - all but jump variables are removed from source. All signal handlers now
                    917: use encapsulated variables and signals are caught by thread;
                    918: - major bug is discovered in ->LCD. Both LCD-> and ->LCD have been fixed;
                    919: - NEWPLANE is added;
                    920: - LINE is added;
                    921: - DGTIZ is added;
                    922: - major bug is fixed in ROW-> intrinsic (comes from new garbage collector);
                    923: - lot of multiprocessing related bugs have been fixed; That was a huge work but
                    924: it's done. Data integrity is now respected during transmission (POKE, SEND and
                    925: SWI);
                    926: - ITRACE is added. This intrinsic is only used to debug internal structures and
                    927: should not be used in regular programs;
                    928: - SWISTATUS is written;
                    929: - WFACK is written;
                    930: - rplcore files are now able to handle compilation errors;
                    931: - rplcore files are now able to handle evaluation and interruption errors;
                    932: - SORT can now be used on table;
                    933: - tables can now be sent by POKE and SEND instrinsics;
                    934: - software interrupts do not inherit IFERR controls;
                    935: - LOGGER intrinsic is added;
                    936: - All WF* intrinsics but WFSOCK are made interruptible;
                    937: - ISWI intrinsic is added. Current interrupt is marked as 'interruptible';
                    938: - tables can be used with SAME intrinsic;
                    939: - minor bug is fixed in recherche_variable(). Only occurs when an error
                    940: is caught;
                    941: - external functions can now be used in expressions;
                    942: - major bug (deadlock) is fixed in WFPOKE intrinsic;
                    943: - some mistakes have been fixed under Solaris;
                    944: - major bug is fixed in RETURN intrinsic (only occurs when evaluation and
                    945: program modes are mixed);
                    946: - major bug (dead lock) is fixed in gestion_processus.c;
                    947: - major bug is fixed in WFPROC;
                    948: - rplc, rpllink and mkrplso manpages are added;
                    949: - rpltags tool and manpage are added;
                    950: - WFLOCK is fixed;
                    951: - RPL/2 kills now all process on error;
                    952: - major bug (segfault) is fixed in REMOVE intrinsic.
                    953: * Mon Jul 28 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.8 (RPL/2)
                    954: - configure script is modified to check mysql and postgresql libraries
                    955: on all standard locations. Tested and works on FreeBSD, Solaris and Linux
                    956: Debian;
                    957: - Tables are allowed in eval ( <[ 1 ]> 't' sto 't(1)' eval );
                    958: - ->TABLE and TABLE-> intrinsics are added;
                    959: - major bug is fixed in recherche_type(). Only occurs when rpl executes
                    960: precompiled scripts;
                    961: - new type is added: table with <[ ]> delimiters:
                    962: RPL/2> { 2 3 2 } crtab
                    963: 
                    964: 1: <[ <[ <[ { }
                    965:             { } ]>
                    966:          <[ { }
                    967:             { } ]>
                    968:          <[ { }
                    969:             { } ]> ]>
                    970:       <[ <[ { }
                    971:             { } ]>
                    972:          <[ { }
                    973:             { } ]>
                    974:          <[ { }
                    975:             { } ]> ]> ]>
                    976: 
                    977: CRTAB new intrinsic creates a regular table. By default, all elements are
                    978: nullified lists;
                    979: - rplexternals.h is modified and improved;
                    980: - GNU File (renamed as rplfile) cannot be built due to a bug in libtoolize and
                    981: configure script.
                    982: * Mon Jun 23 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.7 (RPL/2)
                    983: - libiconv is added (iconv library exists on some systems but implemantations
                    984: differ and RPL/2 can crash);
                    985: - --enable-encoding is added to configure script to force system encoding.
                    986: Enconding detection does not work on OpenBSD;
                    987: - internal file utility is shipped and used to avoid xBSD file mistakes;
                    988: - GSL 1.11 and gnuplot 4.2.3 are now used;
                    989: - src/Makefile.am is modified to built RPL/2 ons Solaris 10/sparc;
                    990: - all but user's messages are written on stderr;
                    991: - DUPCNTXT and DROPCNTXT are added to handle more efficiently contexts;
                    992: - SCHED is added. Whit SCHED, you can limit CPU ressource by RPL/2 process;
                    993: - FUSE, RFUSE and CLRFUSE have been added;
                    994: - new bug discovered on NetBSD. sigpending() does not return any signal, thus
                    995: DETACH intrinsic enters in a definitive dead lock. I have no idea to write a
                    996: workaround for this major bug. Nevertheless, all others capabilities seems to
                    997: work fine;
                    998: - '->' is modified to return error when program tries to initialiaze two
                    999: variables with the same name like
                   1000: 1 0 -> I I << ... >>;
                   1001: - CSTOP and RSTOP have been added (catch and release stop signal);
                   1002: - CONTINUE is added to continue a pending process halted by SUSPEND;
                   1003: - SUSPEND is modified to be stopped by SIGFSTOP;
                   1004: - src/Makefile.am is modified to avoid //TRANSLIT flag on systems that don't
                   1005: support GNU iconv;
                   1006: - configure.in script is modified to avoid bugs when --with-postgresql and
                   1007: --with-mysql are specified;
                   1008: - TRNC is written;
                   1009: - minor bug is fixed in both IFT and IFTE. Returned expression has to be
                   1010: evaluated.
                   1011: * Fri Apr 11 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.6 (RPL/2)
                   1012: - SIGPIPE signal handler is modified to avoid abort process when POKE tries
                   1013: to write data into a pipe without reader;
                   1014: - major bug is fixed in RETURN intrinsic. When RETURN was called from a detached
                   1015: process without -p modifier, it can send an ABORT signal instead a KILL one;
                   1016: - PEEK, POKE and WFPOKE new intrinsics are written;
                   1017: - major bug due to new garbage collector is fixed in rplexternals.h (double free
                   1018: corruption);
                   1019: - CLRCNTXT is added (clear contexts);
                   1020: - VERIFY intrinsic is written;
                   1021: - PSHCNTXT and PULCNTXT are added (PSHCNTXT pushes context on an
                   1022: internal contexts stack, PULCNTXT pulls contexts from this internal stack).
                   1023: Main usages of these intrinsics are in conjonction with IFERR or with
                   1024: software interrupts;
                   1025: - HEAD, TAIL and REVLIST intrinsics are added;
                   1026: - function pointers have been added to function description;
                   1027: - new analyse() routine is written. All instrinsics are now in a N-tree;
                   1028: - software interrupts have been fixed;
                   1029: - multitasking capabilities have been modified to be usable on NetBSD. All real
                   1030: time signals have been removed;
                   1031: - major bugs are fixed in multitasking (mutex trouble _and_ segmentation fault);
                   1032: - minor bug is fixed in STR->. STR-> could return a system error instead an
                   1033: execution one;
                   1034: - first bug due to new garbage collector is fixed in '+' ({ } { } +) and in
                   1035: '-' intrinsics;
                   1036: - PostgreSQL support is written.
                   1037: * Mon Mar 17 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.5 (RPL/2)
                   1038: - locale can now be specified in SQL intrinsic :
                   1039: { "mysql:iso-8859-1" "server" "database" ... };
                   1040: - major bug is fixed un analyse_algebrique(). When DISP printed an algebraic
                   1041: object, 'DISP()' was pushed in stack;
                   1042: - same major bug is fixed in <, >, <=, >= and <>;
                   1043: - major bug fixed in formateur() (segfault when a symbol is used without "'");
                   1044: - major bug is fixed in DUPN intrinsic;
                   1045: - when software interrupt (SWI) is evaluated, SWI pushs process id on stack
                   1046: before starting interrupt evaluation;
                   1047: - -f parameter is added when iconv is called;
                   1048: - as old file program was bugged, a new option is added to configure script.
                   1049: When configure is called with --disable-encoding-autodetection, make does not
                   1050: try to detect source encoding. Please, do not use if RPL/2 can be built
                   1051: without this option !
                   1052: - new garbage collector (and more efficient) is written;
                   1053: - configure script is modified to be usable on NetBSD 4.0, but as NetBSD does
                   1054: not support real time signals, RPL/2 cannot use multitasking functions;
                   1055: - error returned by preprocessor are now catched by RPL/2;
                   1056: - -p option is added. With this option, all scripts are compiled before
                   1057: RPL/2 starts evaluation. HALT cannot be used with -p, but all programs run
                   1058: 40% faster;
                   1059: - read and write operations in pipe() are rewritten to be sure that such
                   1060: operations are atomic;
                   1061: - minor bug is fixed in LOGSCALE. With {} LOGSCALE, all scales have to be
                   1062: linear;
                   1063: - major bug is fixed in gestion_processus.c (some pipes were not closed).
                   1064: * Sat Jan 5 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.4 (RPL/2)
                   1065: - major bugs have been fixed in software interrupt management.
                   1066: * Fri Jan 4 2008 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.3 (RPL/2)
                   1067: - JDATE and RDATE are written;
                   1068: - minor bug (segfault) is fixed in EXSUB. It only occurs when EXSUB is executed
                   1069: with wrong arguments;
                   1070: - KILL now kills current process, ABORT kills program;
                   1071: - software interrupts support is added (SWI, WFSWI, SWILOCK, SWIUNLOCK,
                   1072: SWIQUEUE, STOSWI, RCLSWI, CLRSWI);
                   1073: - major bug is fixed in SQL intrinsic (argument types);
                   1074: - system stack is now written in core file;
                   1075: - ALARM is added;
                   1076: - nanosleep() now replaces sleep() and usleep() system calls;
                   1077: - _GNU_SOURCE is added to rpl.h.
                   1078: * Fri Nov 30 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.2 (RPL/2)
                   1079: - License is changed. Now RPL/2 license is CeCILL (GPL compliant);
                   1080: - EXGET adn EXSUB are added;
                   1081: - minor bug is fixed in recherche_type(). { << } has to return an error.
                   1082: '<<' and '>>' are both functions _and_ delimiters. Thus { IF } is
                   1083: acceptable, but { >> } isn't;
                   1084: - GSL is now 1.10, gnuplot 4.2.2 and units 1.87;
                   1085: - OBGET and OBSUB intrinsics are added;
                   1086: - src/Makefile.am minor bug is fixed (make clean deleted src/rpl.xpm);
                   1087: - WAIT intrinsic is modified to use sleep() and usleep() if delay is
                   1088: greater than one second. On some systems, usleep argument must be lower
                   1089: than 1E6;
                   1090: - numeric and character formats are now tested;
                   1091: - -A flag is added. -A is used to give command line parameters to main
                   1092: routine. Example:
                   1093: rayleigh:[~/rpl-4.0.0.prerelease.2/examples] > ./test3.rpl -A "<< X sin >>"
                   1094: +++RPL/2 version 4.0.0.prerelease.2 (vendredi 05.10.2007, 19:03:01 CEST)
                   1095: +++Copyright (C) 1989 à 2006, 2007 BERTRAND Joël
                   1096: << 'X' SIN >>
                   1097: rayleigh:[~/rpl-4.0.0.prerelease.2/examples] > cat test3.rpl 
                   1098: #!/usr/local/bin/rpl -s
                   1099: 
                   1100: TEST
                   1101: <<
                   1102:     disp
                   1103: >>
                   1104: - minor bug (segfault) is fixed in encart() routine (splash screen). Child
                   1105: process ended with segfault due to a mistake in Motif widget cleaning
                   1106: process;
                   1107: - major bug is fixed in DETACH intrinsic. Child process were locked when
                   1108: they were started with a locked mutex that comes from its father;
                   1109: - ctrl+C can now kill all child process;
                   1110: - WFPROC and WFDATA are rewritten;
                   1111: - RETURN is fixed to be usable in detached process;
                   1112: - HALT is not exported to child process;
                   1113: - FLOW filetype is added;
                   1114: - Makefiles are modified to support gcc-4.2 and gfortran-4.2;
                   1115: - socket support (Unix, IPv4, IPv6, STREAM, DATAGRAM, ROBUST DATAGRAM,
                   1116: SEQUENTIAL DATAGRAM, RAW) is added. Warning: IPv6 sockets have not been tested
                   1117: because I don't have any IPv6 compliant server, but they should work.
                   1118: * Mon Sep 10 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.1 (RPL/2)
                   1119: - library management is rewritten from scratch. EXTERNAL is removed and
                   1120: EXTERNALS is added. Now, all exported symbols are sent to RPL/2 when
                   1121: library is loaded;
                   1122: - OPEN arguments are changed;
                   1123: - EXTERNAL now checks availability of external functions;
                   1124: - number of arguments is verified in analyse_algebrique().
                   1125: 'SIN(A+X,2)' is now refused because SIN requires only one argument;
                   1126: - all but lapack symbols are exported from librpl with librpl, f77 or f90
                   1127: prefix;
                   1128: - minor bug is fixed in formateur() (AND and OR requires parenthesis);
                   1129: - rplexternals.h header file is added; Now, it is very easy to write
                   1130: external functions;
                   1131: - memory leak is fixed in analyse_algebrique();
                   1132: - minor bug (symbole flag) is fixed in sequenceur.c and types.c;
                   1133: - temp file was not removed when an error occurs in EDIT or VISIT;
                   1134: - 'name' should not returned a function ("FCT" object);
                   1135: - -rdynamic is added to src/Makefile.am.
                   1136: * Mon Jul 23 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.0.0.prerelease.0 (RPL/2)
                   1137: - Major bug is fixed in interface_tex.c. When there are errors in latex
                   1138: file, latex command waits for input on its command line;
                   1139: - major bug is fixed in tex.h (multiline strings);
                   1140: - examples subdir is added;
                   1141: - major bug is fixed in recherche_variable(). When an expression is evaluated
                   1142: in a function, all variables set in this function must be visible in
                   1143: expression. Thus, << I -> 3 << << I >> eval >> must return 3, not 'I';
                   1144: - LAST stack is saved in rplcore;
                   1145: - major bug is fixed in ->HMS. It only occurs when argument type is not
                   1146: integer or real;
                   1147: - major bug (segfault) is fixed when rpl is called with empty file;
                   1148: - libtool support is removed. Two new scripts (rplc and rpllink) are provided
                   1149: to use librpl.a;
                   1150: - automake scripts are rewritten to avoid a misconfiguration of librpl.a
                   1151: when -j make option is used;
                   1152: - trace output now contains PID;
                   1153: - rpl-core is renamed in rpl-code-$PID;
                   1154: - rplc and rpllink scripts can now sompile and build C and Fortran
                   1155: executables with librpl.a;
                   1156: - New classification, only a working simplification() routine is
                   1157: required to announce 4.0.0.final;
                   1158: - librpl entry point is modified to return results as strings array;
                   1159: - -S option is added;
                   1160: - due to a major bug in libtool, libtool is removed from autoconf/automake
                   1161: scripts;
                   1162: - VERSION is modified to return a list.
                   1163: * Tue Jul 17 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8x (RPL/2)
                   1164: - major regression bug is fixed in PRINT due to mistake in latex pathes;
                   1165: - gnuplot does not have to be built if --disable-embedded-gnuplot is set;
                   1166: - new prompt ("RPL/2> ") is used for interactive mode;
                   1167: - ARCCOS, ARCSIN, ARCTG, ARGCH, ARGSH, ARGTH, CH, SH, TH and TG intrinsics
                   1168: are removed, because all of these intrinsics have two forms. ARCCOS is
                   1169: the same than ACOS, TAN=TG, COSH=CH. Please adapt your scripts;
                   1170: - gnuplot compilation does not have to be done when disable-gnuplot is set;
                   1171: - major bug is fixed in RECV that avoid usage of multitasking.
                   1172: * Tue Jul 10 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8w (RPL/2)
                   1173: - False error (system error) was reported by recherche_type();
                   1174: - recherche_type() returns syntax error if a list is included in
                   1175: an algebraic expression;
                   1176: - --enable-debug is modified. Now, return can be defined to print
                   1177: on stdout its position in source code (line and function);
                   1178: - minor bug is fixed in recherche_type(). Don't forget that space
                   1179: are not significant in algebraic expression:
                   1180: '12 3+ 12    X' is the same expression than '123+12X';
                   1181: - src/Makefile.am is modified to avoid double compilation process;
                   1182: - --enable-final-run-path is added to configure.in script;
                   1183: - STATIC is modified to declare static variables in expression. Warning: static
                   1184: variables used in expressions are deleted when evaluation of this expression
                   1185: ends;
                   1186: - MEM does not report static variable sizes;
                   1187: - minor bug is fixed in HELP intrinsic. When the last instruction was not
                   1188: known, HELP function was pushed in operational stack. HELP did not work
                   1189: when there were space on input line.
                   1190: * Mon May 28 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8v (RPL/2)
                   1191: - DATE is modified: reduced julian days is replaced by fraction part
                   1192: of julian days. Old field used by julian days is now integer part of julian
                   1193: days;
                   1194: - CONVERT intrinsic is rewritten to accept absolute path in popen;
                   1195: - automake scripts are modified to delete src/lock file if build process aborts;
                   1196: - rplargs.h directly includes rpl.h;
                   1197: - absolute pathes are added to all external program files (rplplot, rplpp...);
                   1198: - intrinsic functions are case sensitive. External functions are case
                   1199: unsensitive. A minor bug is fixed in recherche_type() because all external
                   1200: functions were case unsensitive when they were evaluated from RPN expressions;
                   1201: - HELP function is rewritten to be more friendly (a la OpenVMS);
                   1202: - external wrapper (rplplot) is written to force usage of gnuplot provided
                   1203: by RPL/2 if it is built during build process. If this build does not exist,
                   1204: it tries to launch regular gnuplot;
                   1205: - gnuplot is added to source tree to avoid some trouble between preinstalled
                   1206: gnuplot and release used by RPL/2. This addition to source tree is
                   1207: required by some incompatibility between gnuplot releases;
                   1208: - Lapack is upgraded to 3.1.1 release;
                   1209: - GSL is upgraded to 1.9 revision;
                   1210: - RPL_TMP_PATH env variable is added to specify the path of tempfiles. If
                   1211: it is not set, /tmp is used. If /tmp is not writable, /var/tmp is used. If
                   1212: not, ./ but RPL/2 can hang with a fatal error if this last location is
                   1213: not writable;
                   1214: - major regression is fixed in SYSEVAL intrinsic due to introduction of
                   1215: error scrutation.
                   1216: * Sat Mar 24 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8u (RPL/2)
                   1217: - SYSEVAL is modified to return an error when execvp() syscall cannot
                   1218: execute its arguments;
                   1219: - -hard-float sparc option is remove from mkrplso;
                   1220: - major bug is fixed in SQL intrinsic that hangs when query did not return
                   1221: any values (for exemple INSERT);
                   1222: - escape sequences can be used in SYSEVAL argument like "echo \"string\""
                   1223: SYSEVAL;
                   1224: - graphic and PostScript outputs are now cleared in child process;
                   1225: - locales are now used by preprocessor;
                   1226: - major bug is fixed in impression_tex(). PRINT did not work due to a bug
                   1227: introduced by multitasking code;
                   1228: - SORT can now use name as its argument.
                   1229: * Sun Jan 21 2007 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8t (RPL/2)
                   1230: - Variable management has been rewritten and some tests have been done. Now,
                   1231: it is possible to execute:
                   1232: 
                   1233: #!/usr/local/bin/rpl -sc
                   1234: 
                   1235: TEST
                   1236: <<
                   1237:     1 1000 start VAR_S VAR_S2 next
                   1238: >>
                   1239: 
                   1240: VAR_S
                   1241: <<
                   1242:     static 3 -> C << C disp 'C' incr if C 10 > then 'C' volatile end >>
                   1243: >>
                   1244: 
                   1245: VAR_S2
                   1246: <<
                   1247:     static 3 -> C << C disp 'C' decr >>
                   1248: >>
                   1249: 
                   1250: - configure.in script is added in lapack subtree;
                   1251: - VARS is modified to display variables status (LOCKED/UNLOCKED and
                   1252: STATIC/VOLATILE/PARAMETER/VARIABLE);
                   1253: - STATIC and VOLATILE intrinsics are added to specify static variables. A
                   1254: static variable can be transformed into volatile with VOLATILE.
                   1255: With STATIC, next variables created by '->' are static;
                   1256: - PROTECT and UNPROTECT are added to protect variables against write
                   1257: or purge actions. New PARAMETER and VARIABLE intrinsics are modified
                   1258: versions of PROTECT and UNPROTECT that only deal with global variables
                   1259: (see RCL/SAVE);
                   1260: - variable management routines have been rewritten. The new ones are
                   1261: uncompatible with the old ones. Before these changes, a local variable
                   1262: was exported to a child subroutine, but cannot be modified into this
                   1263: child subroutine. Now, a local variable is accessible only in its subroutine;
                   1264: - SAVE intrinsic is added to manipulate global variables;
                   1265: - SUSPEND is written. RPL/2 waits for a SIGCONT signal;
                   1266: - SORT, COL->, ->COL, ROW->, ROW-> intrinsics are written;
                   1267: - Makefile.am are improved;
                   1268: - minor bug is fixed in ->list and ->array. Without any argument, these
                   1269: intrinsic only send a SIGSEGV;
                   1270: - ncurses is updated to release 5.6;
                   1271: - lapack is updated to 3.1.0.
                   1272: * Sun Dec 31 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8s (RPL/2)
                   1273: - default CFLAGS/FFLAGS/FCFLAGS are modified due to a bug in gcc-sparc64
                   1274: that avoid a complete build;
                   1275: - CTRL+Z and CTRL+C signals only perform actions on main process;
                   1276: - major bugs are fixed in multitasking capabilities (some mistakes with
                   1277: mutexes and several terminated child process cannot be closed by the
                   1278: operating system);
                   1279: - minor bug fixed in SCLS (mistake between main and auxiliary axes);
                   1280: - variables are now written in rpl-core file;
                   1281: - NEG is modified to return 0 instead -0 when its argument is real or complex
                   1282: number;
                   1283: - ROW+ intrinsic can now be used on empty matrix without dimension error:
                   1284: [[]] 1 [[ 1 2 ]] row+;
                   1285: - major bug is fixed in SUB intrinsic. It only occurs with lists when
                   1286: it tries to returns invalid elements like { } 1 2 sub;
                   1287: - major bug is fixed in ROW- intrinsic;
                   1288: - major bug is fixed in ROW+ intrinsic.
                   1289: * Sat Dec 02 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8r (RPL/2)
                   1290: - creation_nom_fichier() is rewritten to force all process to create
                   1291: different file names;
                   1292: - RANLUX is removed to use GSL library and avoid a bug in gfortran-4.1;
                   1293: - readline-5.2 and units-1.86 are now used;
                   1294: - SEQUENCE statement is added in fonctions_speciales.f90 to fix a build
                   1295: failure.
                   1296: * Mon Oct 23 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8q (RPL/2)
                   1297: - wfproc is rewritten to avoid a dead lock;
                   1298: - major mistake is fixed in both sommation_vecteur_reel() and
                   1299: sommation_vecteur_complexe();
                   1300: - multitasking is rewritten from scratch to fix some mistakes with
                   1301: multithreading. DETACH, SEND and RECV now use four real time signals to
                   1302: perform a better task synchronization;
                   1303: - some bugs introduced by locales specific compilations are fixed;
                   1304: - major memory corruption is fixed in DEPND;
                   1305: - HELP intrinsic is modified to print a classified output.
                   1306: * Mon Aug 12 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8p (RPL/2)
                   1307: - major memory leak is fixed in DETACH intrinsic. Files were closed by
                   1308: both childs and parent;
                   1309: - bug that avoids usage of Motif is fixed in configure.in;
                   1310: - makefile's are modified to build RPL/2 with other locale than ISO-8859;
                   1311: - db is removed from source tree due to some compilation troubles (db's
                   1312: autoconf script is broken);
                   1313: - sdb is removed from source tree due to some memory leaks and some troubles
                   1314: with its configure script. New SQL routines are written, but only MYSQL
                   1315: subsystem is available. Now, SQL can be used without memory leak;
                   1316: - major bug is fixed in evaluation() subroutine. Value of error flag
                   1317: was not returned in some cases;
                   1318: - FACT intrinsic does not accept real arguments anymore due to the new intrinsic
                   1319: GAMMA;
                   1320: - GAMMA intrinsic is added (complex function) ;
                   1321: - autoconf/automake scripts are modified to compile F90 sources;
                   1322: - src/distributions.f is replaced by src/distributions.f90. All Numerical
                   1323: Recipes references are avoided to use GSL;
                   1324: - GSL is upgraded to 1.8 release;
                   1325: - -lz is added in src/Makefile.am to fix a mistake in sparc32.
                   1326: * Mon Apr 10 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8o (RPL/2)
                   1327: - fft.f is removed. Now FFT intrinsic uses dft subroutine;
                   1328: - Sparc64 optimizations are modified. Now gcc-4.0 can be used to build RPL/2 on
                   1329: Sparc64. Same modifications are done on sparc32;
                   1330: - major bug are fixed in both PLOTTER and HISTOGRAM intrinsics
                   1331: (interface with GNUplot).
                   1332: - major bugs are fixed in USE/REMOVE intrinsics (system stack corruption);
                   1333: - corruption of last stack is fixed in mclrin (only occurs when an error is
                   1334: caught);
                   1335: - major bug (in a malloc condition) is fixed in derivation().
                   1336: * Tue Jan 07 2006 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8n (RPL/2)
                   1337: - configure script and makefiles are modified to be usable with automake
                   1338: 1.9.6 (GNU), libtool 1.5.20 (GNU) and autoconf 2.59 (GNU).
                   1339: - gestion_fichiers() prototype is modified to be built by gfortran. Now,
                   1340: gfortran is the default compiler for FORTRAN code included in RPL/2;
                   1341: - libdb is added to perform indexed file access;
                   1342: - SQL interfaces are added (SQL intrinsic). Only mysql is supported;
                   1343: - minor bug is discovered and fixed in matrix multiplication (precision);
                   1344: - rpl.spec.in and debian directory are deleted due to some mistakes in the
                   1345: scripts required to build packages.
                   1346: * Tue Nov 15 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8m (RPL/2)
                   1347: - major bug is fixed in IFERR/THEN/(ELSE)/END structure. It occured when an
                   1348: error is caught before a regular IF/THEN/(ELSE)/END structure in
                   1349: IFERR/THEN/(ELSE)/END structure;
                   1350: - chmod 755 debian/rules is done by makefile;
                   1351: - major bug is fixed in recherche_instruction_suivante():
                   1352: +++"123 " str->
                   1353: +++Erreur : Argument invalide pour la commande << "123 " str-> >>
                   1354: Before this fix, it was impossible to use a command line that ends with spaces.
                   1355: * Sat Oct 29 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8l (RPL/2)
                   1356: - SELECT/CASE/DEFAULT/END is modified. Now, it is impossible to write:
                   1357: SELECT
                   1358:    <case>
                   1359:    CASE <test> THEN <expr> END
                   1360:    ...
                   1361:    DEFAULT
                   1362:    DEFAULT <- two DEFAULT's
                   1363: END
                   1364: 
                   1365: or
                   1366: 
                   1367: SELECT
                   1368:    <case>
                   1369:    CASE <test> THEN <expr> END
                   1370:    ...
                   1371:    DEFAULT
                   1372:    ...
                   1373:    CASE <test> THEN <expr> END <- CASE statement after DEFAULT
                   1374: END
                   1375: - major bug is fixed (in (unsigned char) getc()). It only occurs when RPL/2 is
                   1376: built with gcc-4.0.
                   1377: - configure.in is modified to be usable with gcc-4.0.
                   1378: * Mon Oct 3 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8k (RPL/2)
                   1379: - segmentation fault occurs in both PROMPT and INPUT when readline returns
                   1380: NULL (ctrl^D). This trouble is now fixed;
                   1381: - major bug is fixed in DATE intrinsic (julian days and reduced julian days);
                   1382: - stderr of rplpp is now caught;
                   1383: - SYSEVAL is modified to use stdin, stdout and stderr:
                   1384: ESSAI
                   1385: <<
                   1386:    // Only stdout and stderr
                   1387:     "ls" dup disp syseval
                   1388:     clmf
                   1389:    // Now with stdin ("zer\naze\n")
                   1390:     { "cat" "zer" "aze" } dup disp syseval
                   1391:     clmf
                   1392: >>
                   1393: - GSL is upgraded to 1.7.
                   1394: * Thu Sep 29 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8j (RPL/2)
                   1395: - SYSEVAL is modified. It now returns stdout and stderr in a list;
                   1396: - minor memory leak is fixed in recherche_instruction_suivante() subroutine.
                   1397: * Thu Aug 4 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8i (RPL/2)
                   1398: - internal file descriptors are modified to be usable with DUMP intrinsic;
                   1399: - VARS intrinsic is modified and now prints value of variables.
                   1400: * Thu Jul 21 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8h (RPL/2)
                   1401: - units is upgraded to 1.85 release;
                   1402: - -d flag is added in command line. Don't use this flag if you don't know
                   1403: what you do! It is only used to debug internal memory allocations;
                   1404: - internal pointers (ADR objects) are printed as 64 bits pointers to be usable
                   1405: on 64 bits wide architectures.
                   1406: * Sat apr 16 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8g (RPL/2)
                   1407: - DUMP is rewritten to be portable. It works, but without shared libraries,
                   1408: printer file, graphic files and last error. Support for this kind of objects
                   1409: shall be available as soon as possible. Warning: DUMP cannot be used in
                   1410: multiprocessing;
                   1411: - configure.in script is modified to return an error when g77 is not found;
                   1412: - a new internal type is used to handle shared libraries;
                   1413: - a major bug is discovered and fixed in recherche_type(). It only occurs
                   1414: in interactive mode ([[ 1 ]] returns a syntax error);
                   1415: - a major bug is found in simplification_arbre(). Subroutine is disabled.
                   1416: * Thu mar 17 2005 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8f (RPL/2)
                   1417: - option -r is added to restart a process from a dump file;
                   1418: - DUMP intrinsic is added. It performs synchronous checkpointing;
                   1419: - GSL is upgraded to release 1.6.
                   1420: * Wed dec 22 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8e (RPL/2)
                   1421: - Result types of PERM and COMB instrinsic are fixed;
                   1422: - RPL/2 now uses a new preprocessor due to a new 'feature' in gcc/cpp;
                   1423: - RPL/2 can now use all processors on multiprocessor workstations with
                   1424: DETACH, SEND, RECV and WFPROC new intrinsics. The first test program was:
                   1425: 
                   1426: #!/usr/local/bin/rpl -cs
                   1427: 
                   1428: MULTIPROCESSUS
                   1429: <<
                   1430:     'FONCTION' detach
                   1431:     do "B" disp until false end
                   1432: >>
                   1433: 
                   1434: FONCTION
                   1435: <<
                   1436:     do "A" disp until false end
                   1437: >>
                   1438: 
                   1439: * Sun dec 12 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8d (RPL/2)
                   1440: - major bug is discovered and fixed in analyse_notation_algebrique :
                   1441: +++'A-B-C' returned
                   1442: 1: 'A-(B-C)' instead of 1: 'A-B-C'. It is now fixed;
                   1443: - recherche_type() routine is improved to cast in name 1E5E-6 or 1.23.4.5.
                   1444: * Fri dec 7 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8c (RPL/2)
                   1445: - major bug is fixed in formateur_fichier(). Now, it is possible to use
                   1446: lists in a file record. Note that only sequential and formatted files
                   1447: are supported;
                   1448: - major bug is fixed in BACKSPACE intrinsic. It only occurs on large
                   1449: records.
                   1450: * Fri nov 26 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8b (RPL/2)
                   1451: - minor bug is fixed in IP intrinsic: when argument was real without
                   1452: fraction part, IP returned a real, not an integer;
                   1453: - minor bug is fixed in recherche_type(): it is now possible
                   1454: to enter +++<NB3 + return. RPL/2 returns a syntax error, not a acces
                   1455: violation;
                   1456: - MCLRIN (MacLaurin series) intrinsic is added;
                   1457: - TAYLR (Taylor series) instrinsic is added;
                   1458: - very minor bug is fixed in evaluation(). Sometimes, when evaluation()
                   1459: is stopped by ^C, EXIT intrinsic did not work due to a mistake in
                   1460: the internal system stack;
                   1461: - minor bug is fixed in encart.c. System error messages returned by
                   1462: this subroutine were only available in french;
                   1463: - internal RPL/2 system stack corruption is fixed. This bug only affects
                   1464: interactive and debug modes when evaluation routine returns an error;
                   1465: - symbolic derivation subroutine is now able to derivate functions;
                   1466: - minor bug is fixed in instruction_multiplication: now 'X' 1. * returns
                   1467: 'X' and not 'X*1'.
                   1468: * Thu nov 18 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8a (RPL/2)
                   1469: - ctags in src/Makefile.am is fixed;
                   1470: - first derivation subroutines are written;
                   1471: - major bug is fixed in analyse_algebrique() :
                   1472: before this patch, '3-5+4' was understand as '3-(5+4)' !
                   1473: - instruction_division() is improved and returns 0 when it evaluates
                   1474: '0/X';
                   1475: - instruction_moins() is improved and returns 'NEG(X)' when it evaluates
                   1476: '0-X'.
                   1477: * Fri nov 5 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre8 (RPL/2)
                   1478: - interface_gnuplot is modified and do not use any deprecated gnuplot
                   1479: commands. Warning, you must use gnuplot 4.0;
                   1480: - graphic output is improved. Now, it is possible to use two separated
                   1481: scales on the same 2D graph (with "main" and "auxiliary" option of SCALE
                   1482: intrinsic). For example:
                   1483: 
                   1484: #!/usr/local/bin/rpl -c
                   1485: 
                   1486: TEST
                   1487: <<
                   1488:    'X' indep
                   1489:    { X Y } autoscale
                   1490:    'SIN(X)' steq draw
                   1491:    { "auxiliary" } axes
                   1492:    { X Y } autoscale
                   1493:    'COS(X)+2' steq draw
                   1494:    { { "ticsonly" "automatic" } { "ticsonly" "automatic" } } axes
                   1495:    drax persist
                   1496: >>
                   1497: 
                   1498: - a major bug is fixed in encart.c;
                   1499: - ncurses is patched.
                   1500: * Mon nov 1 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7o (RPL/2)
                   1501: - configure script is updated;
                   1502: - splash screen is added;
                   1503: - minor bug is fixed in SYSEVAL (only occurs with SIGINT signal).
                   1504: * Sun oct 24 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7n (RPL/2)
                   1505: - stack overflows are caught.
                   1506: * Fri oct 8 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7m (RPL/2)
                   1507: - minor bug is fixed in both << and >> intrinsics. It only occurs when
                   1508: "<<" HELP or ">>" help is called;
                   1509: - DFT and IDFT are added;
                   1510: - minor bug is fixed in FFT (explicit length has to be positive);
                   1511: - MOD can be used with vectors and matrices arguments;
                   1512: - major bugs are fixed in FFT and IFFT (trouble in the computation of the
                   1513: default length of FFT). Only occur with matrices.
                   1514: * Sat aug 14 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7l (RPL/2)
                   1515: - readline is upgraded to 5.0;
                   1516: - gsl is upgraded to 1.5;
                   1517: - corrections in HELP functions.
                   1518: * Fri aug 7 2004 BERTRAND Joël <rpl@systella.fr> rpl-4.00pre7k (RPL/2)
                   1519: - HELP is added;
                   1520: - statistic matrix SIGMA is renamed as SDAT;
                   1521: - rpl.h is modified to workaround a bug in Cygwin environment
                   1522: (SA_NOMASK is not defined in include files);
                   1523: - overflows are tested in HMS+ and HMS-;
                   1524: - CEIL, FLOOR and IP are modified to return a correct result with huge
                   1525: arguments that cannot be stored as integers;
                   1526: - fix a minor bug in ->LIST. The LAST stack now contains all arguments
                   1527: of this intrinsic;
                   1528: - flag 32 is used with DISP;
                   1529: - major bug is fixed in ->Q intrinsic (type of argument and memory leak).
                   1530: * Fri may 21 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7j (RPL/2)
                   1531: - major bug is fixed in analyse(). CHR intrinsic cannot be called because
                   1532: I have erased a 'break' in a case statement;
                   1533: - major bug is fixed in AXES intrinsic. It only occurs when AXES is used
                   1534: with "main" or "auxiliary" option;
                   1535: - major bug is fixed in recherche_types(). With this patch, 'sin(X)' is
                   1536: now well analysed as 'SIN(X)'.
                   1537: * Thu apr 22 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7i (RPL/2)
                   1538: - major bug is discovered and fixed in formateur(). It only occurs when
                   1539: an algebraic expression is displayed with '='. In some cases, parenthesis
                   1540: are missing. Same fix in formateur_fichier();
                   1541: - a minor bug is fixed in evaluation.c that does not return any error when
                   1542: it tries to execute 'a=z' e = ;
                   1543: - new code is written in each intrinsic functions to return their required
                   1544: arguments.
                   1545: * Sun apr 14 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7h (RPL/2)
                   1546: - a minor bug is fixed in recherche_type: 1.E90 is now a real;
                   1547: - minor bug is fixed in formateur_reel(). It only occurs in STD mode:
                   1548: 1E90 was printed as 1.00000000000000E90;
                   1549: - HELP is added;
                   1550: - formateur() is fixed to properly print matrices and lists;
                   1551: - a lot of warnings due to deprecated syntax are fixed;
                   1552: - DFT is modified but not usable;
                   1553: - cosmetic bug is fixed in formateur_tex.c;
                   1554: - minor bug is fixed in FFT intrinsic (segfault when FFT is called without
                   1555: any argument).
                   1556: * Sun Jan 25 2004 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7g (RPL/2)
                   1557: - included ncurses is updated to 5.4;
                   1558: - included units is updated to 1.83c;
                   1559: - major bug is fixed in recherche_type() function. With this bug, RPL/2
                   1560: prints 'A/INV(Z+E)+R' when you enter A Z E + inv R + /;
                   1561: - DFT intrinsic is added. It returns the discrete Fourier transform of an
                   1562: array. When the length of each line is 2**n, the result is the same as
                   1563: the result of FFT;
                   1564: - minor bug is discovered and fixed in PUT and PUTI intrinsics when these
                   1565: instructions verify arguments types. It does not affect the result when
                   1566: all arguments are correct.
                   1567: * Sun Oct 19 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7f (RPL/2)
                   1568: - major bug is fixed in evaluation of both EXIT and CYCLE intrinsics. Now,
                   1569: EXIT can be used (as ABORT and KILL) to quit interactive mode of RPL/2;
                   1570: - units is updated to 1.83a release;
                   1571: - formateur_fichier.c is modified to handle unformatted files. This task
                   1572: is not completed.
                   1573: * Mon Aug 25 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7e (RPL/2)
                   1574: - CLUSR is written. It purges all global variables;
                   1575: - BESSEL intrinsic is fixed to allow the use of expressions as arguments;
                   1576: - a major bug was introduced with rpl-4.00pre7d in formateur.c. It appears
                   1577: when an algebraic expression is displayed or printed but does not affect
                   1578: computations. It is now fixed;
                   1579: - gsl is upgraded to 1.4.
                   1580: * Mon Aug 18 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7d (RPL/2)
                   1581: - algebraic expressions are now more readable when they are displayed
                   1582: (less parenthesis);
                   1583: - rplpp is modified to workaround a mistake in 'which' function (seems to appear
                   1584: on Debian distribution, but since cpp is in the default path, RPL/2 works
                   1585: fine...);
                   1586: - NOT is not correctly formatted in formateur.c:
                   1587: Z NOT -> 'NOT Z' but 'A+Z' NOT -> 'NOT A+Z' and 'NOT Z+A' -> 'NOTZ+A'
                   1588: with a NOTZ function !
                   1589: * Sun Aug 10 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7c (RPL/2)
                   1590: - CYCLE is fixed. Now, it is possible to use CYCLE in an expression even
                   1591: if the main loop is in a program;
                   1592: - RPL/2 is tested with efence and valgrind;
                   1593: - configure.in script is modified;
                   1594: - units.c is modified to be built by gcc-3.3. I only have removed a #if 0/#endif
                   1595: structure. I don't know why this code was compiled by gcc-3.3... Maybe
                   1596: another gcc bug...
                   1597: * Fri Jul 25 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7b (RPL/2)
                   1598: - EXIT is fixed. Now, it is possible to use EXIT in an expression when the
                   1599: main loop is in a program;
                   1600: - RPL/2 can take its arguments (and command) on the standard input. Try
                   1601: echo "1 2 3 + *" | rpl -i | grep "^1:" | cut -d ':' -f2
                   1602: - a minor bug in vim syntax file is fixed (CYCLE and EXIT intrinsics);
                   1603: - a minor bug is discovered in analyse_algebrique(). Now, expression
                   1604: such as 'A+Z AND 2' or '(A+Z) AND 2' are correctly parsed.
                   1605: * Mon Jun 16 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7a (RPL/2)
                   1606: - Major bug is fixed in evaluation subroutine. This one only occurs
                   1607: when an error in a user definition called by an expression is caught
                   1608: by an IFERR structure;
                   1609: - EXIT intrinsic can now be used in DO/UNTIL/END or WHILE/REPEAT/END loops;
                   1610: - sequenceur() is now uninterruptible with STOP signal in recherche_type()
                   1611: subroutine;
                   1612: - major bug is fixed in types.c (# xxxxxb) and recherche_instruction_suivante();
                   1613: - GSL exception (underflow) is now caught;
                   1614: - tools/Makefile.am is fixed;
                   1615: - Debian buildpackage script is fixed.
                   1616: * Tue Jun 10 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre7 (RPL/2)
                   1617: All memory leaks issued from the pre6 beta releases seem to be fixed.
                   1618: Build process is improved and vim syntax file and manual pages are updated.
                   1619: * Mon Jun 9 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6l (RPL/2)
                   1620: - RCI and RCIJ intrinsic are added;
                   1621: - BESSEL intrinsic is added. Syntax:
                   1622: 3: type ("J", "K", "I", "Y", "j", "k", "i", "y")
                   1623: 2: order (integer or real)
                   1624: 1: x;
                   1625: - ->Q intrinsic is added;
                   1626: - major bug is fixed in C->R intrinsic;
                   1627: - ROW+ and ROW- are added and tested;
                   1628: - COL+ and COL- are added and tested. Syntax:
                   1629: 3: matrix
                   1630: 2: integer (number of column to be inserted)
                   1631: 1: column matrix to be inserted;
                   1632: - major bug was discovered in interface_gnuplot(). It only occurs when
                   1633: the subroutine reduces the graphical depth. It is now fixed;
                   1634: - Some mistakes are been fixed in vim syntax file;
                   1635: - SX2, SY2 and SXY are added;
                   1636: - SX and SY statistical intrinsics are added;
                   1637: - DEBIAN control file is fixed;
                   1638: - PAPER intrinsic is added. Supported paper formats are now : a4, a5, b5,
                   1639: letter, legal, executive;
                   1640: - PPAR is modified to include current graphic type.
                   1641: * Sun Jun 1 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6k (RPL/2)
                   1642: - SLICESCALE intrinsic is added. Its syntax is
                   1643: { "automatic" nb_of_levels }
                   1644: { "discrete" l1 l2 l3 ... }
                   1645: { "incremental" start incr }
                   1646: { "incremental" start incr end }
                   1647: { "automatic" } (default);
                   1648: - a minor bug (in last stack) is fixed in AXES intrinsic
                   1649: - flag 52 is used to automatically update graphics;
                   1650: - man pages are updated;
                   1651: - evaluation() is modified to perform evaluation of expressions that contain
                   1652: '=';
                   1653: - a minor bug is fixed in AXES intrinsic;
                   1654: - a minor bug is fixed in DRAW intrinsic (2D and 3D graphics were able to
                   1655: appear on the same figure). The same mistake is fixed in DRWS intrinsic;
                   1656: - LAST is disabled in evaluation subroutine (EVAL and ->NUM intrinsics).
                   1657: * Sun May 18 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6j (RPL/2)
                   1658: - SLICE intrinsic is added. It is used to draw 3D graphics as contour lines;
                   1659: - PLOTTER is added to draw statistical clouds with lines;
                   1660: - C and H source files now include vim parameters;
                   1661: - vim syntax file is modified to include new intrinsics;
                   1662: - static archive is modified to include all required libraries needed by
                   1663: RPL/2.
                   1664: * Sun May 4 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6i (RPL/2)
                   1665: - '=' is added and tested;
                   1666: - XCOL and YCOL are added;
                   1667: - a minor bug in analyse_syntaxique() is fixed;
                   1668: - THEN is modified to return an error when ELSE appears in a CASE/THEN/END
                   1669: structure. ELSE is modified to return an error when ELSE appears in
                   1670: an ELSE/END structure;
                   1671: - a major bug is fixed in CYCLE;
                   1672: - EXIT is written. When EXIT appears in a defined loop (FOR or START), the
                   1673: sequencer continues after the end of this loop;
                   1674: - SCLS is added;
                   1675: - DRWS now uses COLS to draw 2D graphics;
                   1676: - PPAR and SPAR are written. SPAR returns a list that contains the
                   1677: size of the statistical matrix (or "UNAVALAIBLE" if there is any
                   1678: statistical variable, or "DISABLED" if its type is not one of the type of
                   1679: a statistical matrix.) and XCOL and YCOL parameters. Warning: [[]] SIZE
                   1680: returns { 1 0 } and it is not a bug, because a null matrix contains _one_
                   1681: null line ! Thus, [[]] STOS SPAR returns { { 1 0 } 1 2 };
                   1682: - EXTERNAL intrinsic is added. Warning: by default, extern functions are
                   1683: disabled. Arguments of EXTERNAL are case sensitive because the external
                   1684: interface is written in C. { ext_sinus } EXTERNAL does not replace the list
                   1685: of known external functions but add the new list to the last. { "all" }
                   1686: EXTERNAL allows all external functions and { "none" } EXTERNAL removes all
                   1687: external names of the known functions;
                   1688: - mkrplso.in is modified.
                   1689: * Sun Apr 20 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6h (RPL/2)
                   1690: - vim syntax file is upgraded;
                   1691: - a minor mistake is fixed in recherche_instruction_suivante();
                   1692: - some minor memory leaks are fixed in recherche_type() function. They only
                   1693: occurs when a syntax error is detected;
                   1694: - #error and #warning preprocessor macros are added;
                   1695: - INCR and DECR are written (with integer or variable argument);
                   1696: - CSWP and RSWP are added and tested;
                   1697: - a minor bug is fixed in analyse.c;
                   1698: - DEBIAN/control is added to build debian package;
                   1699: - SCALE is fixed and improved ("automatic" keyword);
                   1700: - PUTC and PUTR new intrinsics are added.
                   1701: * Sun Apr 13 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6g (RPL/2)
                   1702: - a very minor bug is fixed in VISIT intrinsic. It only occurs when
                   1703: VISIT does not find a name in level 1;
                   1704: - configure.in script is modified to add a new test (--enable-debug
                   1705: flag). Configured with this fleg, RPL/2 will be built with electric-fences;
                   1706: - GETR (get row[s]) and GETC (get column[s]) are added. These new instructions
                   1707: extract a part of a matrix. Syntax: [[ 1 2 3 ][ 2 3 4 ]] { 1 } GETR or
                   1708: 'MATRIX' { 2 2 3 } GETR;
                   1709: - LOGSCALE intrinsic is improved and now, it can be used as
                   1710: { "main" "auxiliary" X Y } LOGSCALE;
                   1711: - SCALE intrinsic is used to fix the limits of a graphic. Its syntax is the
                   1712: same than AXES:
                   1713: { { 60 "ticsonly" 2 } { "automatic" "ticsonly" 10 } } axes
                   1714: { "auxiliary" { 60 "ticsonly" "default" } { "automatic" } } axes
                   1715: { { -10 10 } "automatic" } SCALE.
                   1716: Warning, it is not possible to ask a logarithmic scale with this intrinsic
                   1717: because it changes only the dimension of the screen. To have a logarithmic
                   1718: scale, you must use LOGSCALE intrinsic:
                   1719: { X } LOGSCALE gives a semi-log screen, { "auxiliary" X Y } gives a log-log
                   1720: screen on second scale;
                   1721: - { X X } autoscale and { Y Y } logscale are now invalid;
                   1722: - *D is added (depth multiplication, for 3D graphics);
                   1723: - a new intrinsic (*S) is added. It changes the scale of a graphic (X, Y
                   1724: and Z axes). The result of *S is the same than DUP DUP *H *W *D;
                   1725: - a major bug is fixed in GETI instrinsic when it is used with a name
                   1726: that contains a matrix or a vector (bad upper bounds conditions in
                   1727: incrementation);
                   1728: - DISP intrinsic now uses the 33-th flag. When it is not set
                   1729: (default), a final carriage return is sent to the terminal;
                   1730: - AXES intrinsic only takes a list that can contains the keywork
                   1731: "main" or "auxiliary". Before this modification, this keyword was in
                   1732: the first stack level;
                   1733: - vim syntax file is upgraded;
                   1734: - in appel_gnuplot(), stdin is closed when gnuplot is called with -raise
                   1735: option;
                   1736: - LAST is now disabled in the main loop of INT intrinsic;
                   1737: - expm1 and lnp1 are rewritten to use expm1 and log1p from math.h.
                   1738: * Sun Apr 6 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6f (RPL/2)
                   1739: - a major bug is fixed in evaluation() subroutine. It occurs with DRAW
                   1740: intrinsic when the equation cannot be evaluated (for example 'SIN(X)/X'
                   1741: in 0);
                   1742: - LAST is disabled in the main loop of DRAW intrinsic;
                   1743: - a major bug is fixed in DRAW intrinsic. When an error occurs in the
                   1744: evaluation of an equation, the system stack is returned corrupted to the
                   1745: sequencer;
                   1746: - the same minor bug is fixed in FOR and START. It only occurs when the limits
                   1747: of a loop are not integer or real.
                   1748: * Sun Mar 31 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6e (RPL/2)
                   1749: - the compilation stage aborts with an error message when two definitions
                   1750: have the same name. To improve the compilation() subroutine, I have to
                   1751: add some tests in gestion_variables.c;
                   1752: - recherche_type() subroutine ad some other connex subroutines are improved.
                   1753: Now, some syntax errors about object are caught and do not perform sequencer
                   1754: hangup;
                   1755: - readline is upgraded (minor compilation bug with recent gcc);
                   1756: - Makefile.am's and configure.in scripts are improved.
                   1757: * Fri Mar 14 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6d (RPL/2)
                   1758: - DRWS intrinsic is written. Two datastyles are associated: SCATTER (2D
                   1759: and 3D) and HISTOGRAM (only 2D, but 3 columns are accepted, the third shown
                   1760: the boxwidth, 1 by default);
                   1761: - recherche_type() is rewritten to be faster;
                   1762: - gsl is upgraded (release 1.3);
                   1763: - ncurses is upgraded and patched (release 5.3);
                   1764: - recherche_instruction_suivante() is fixed (string research with included
                   1765: '"') and rewritten to be faster;
                   1766: - appel_gnuplot() is fixed. When no graphic was available, it returned a
                   1767: segfault.
                   1768: * Sun Mar 9 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6c (RPL/2)
                   1769: - RPL/2 is compiled by gcc-3.2.2 and seems to work;
                   1770: - the same minor bug is fixed in REDRAW and DRAX functions;
                   1771: - a minor fix is written in DRAW function (2D and 3D);
                   1772: - AXES intrinsic is improved. Now { { pi "ticsonly" 4 } "automatic" } DRAX
                   1773: is accepted;
                   1774: - a minor bug is fixed in VISIT intrinsic.
                   1775: * Sun Jan 26 2003 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6b (RPL/2)
                   1776: - a minor bug is fixed in evaluation subroutine;
                   1777: - vim syntax file is improved;
                   1778: - DRAW (wireframe section) is fixed. When an error occurs in the evaluation
                   1779: of a 3D-graphic (for example 'SIN(R)/R' with 'R=SQRT(X**2+Y**2)' in X=0 and
                   1780: Y=0), no graph was procuced (it results from a bug in gnuplot, and this fix
                   1781: is a quick and dirty workaround...);
                   1782: - RETURN intrinsic is modified to fix a trouble in interactive mode;
                   1783: - rplconvert is improved.
                   1784: * Sun Dec 22 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6a (RPL/2)
                   1785: - a memory leak is fixed in formateur.c that only occurs when RPL/2 try
                   1786: to print a list that contains a name;
                   1787: - a major bug is fixed in -> intrinsic that only occurs in evaluation case with
                   1788: a algebraic expression (<< 1 -> X 'X+1' >> eval);
                   1789: - vim syntax file is improved;
                   1790: - RPL/2 can now be built by gcc 3.2.1;
                   1791: - "**" can be used in algebraic expression;
                   1792: - DRAW can now plot wireframe (3D) graphics.
                   1793: * Sun Dec 8 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre6 (RPL/2)
                   1794: - ncurses is patched to be compiled by gcc 3.2;
                   1795: - purification_chaine is rewritten to fix a major bug (when 'chaine' is empty);
                   1796: - a major bug is fixed in recherche_instruction_suivante();
                   1797: - minor bug is fixed in rpl-core file. The error message is now correctly
                   1798: written;
                   1799: - minor bug is fixed in analyse_notation_algebrique.c and types.c.
                   1800: Now, an expression such as 'A+' returns an error when it is analyzed;
                   1801: - VISIT intrinsic is added;
                   1802: - a major memory leak is fixed in evaluation.c. This bug rarely occurs in
                   1803: normal mode.
                   1804: * Sun Aug 25 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5e (RPL/2)
                   1805: - an EDIT intrinsic is added;
                   1806: - PRMD intrinsic returns french or english messages;
                   1807: - rpl-core now call LAST intrinsic if the last stack is avalaible. It
                   1808: contains the error message too;
                   1809: - new syntax, ftplugin and indent files are written for vim text editor;
                   1810: - major bug is found and fixed in RCL intrinsic;
                   1811: - major bug is found and fixed in OR intrinsic.
                   1812: * Mon Jul 29 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5d (RPL/2)
                   1813: - ncurses is updated;
                   1814: - minor bug is fixed on PURGE instruction (an error no caught was
                   1815: returned in interactive mode).
                   1816: * Mon Jul 21 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5c (RPL/2)
                   1817: - ASL (arithm. shift left) is added.
                   1818: * Thu Jul 11 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5b (RPL/2)
                   1819: - ncurses is patched;
                   1820: - gsl is added to perform arithmetic operations;
                   1821: - units is patched;
                   1822: - some very minor bugs have been fixed.
                   1823: * Wed May 15 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5a (RPL/2)
                   1824: - ncurses is patched;
                   1825: - RPL/2 can now be built by gcc 3.1;
                   1826: - RDZ is fixed (minor bug).
                   1827: * Sun Apr 21 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre5 (RPL/2)
                   1828: - RPL/2 can now be called from other languages (librpl libraries).
                   1829: * Sun Mar 24 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4h (RPL/2)
                   1830: - ERRN and ERRM can now be used with errors returned by external functions;
                   1831: - readline and ncurses have been updated;
                   1832: - no more bugs have been reported since the rpl-4.00pre4g release.
                   1833: * Wed Feb 20 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4g (RPL/2)
                   1834: - ERRN and ERRM intrinsic functions are written. They return the last
                   1835: error number or message even if errors are caught by an IFERR structure;
                   1836: - a minor bug is fixed in EPSILON intrinsic. Now, 'EPSILON(0)' returns
                   1837: a non null value;
                   1838: - Ncurses is updated.
                   1839: * Mon Feb 18 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4f (RPL/2)
                   1840: Arithmetic intrinsic instructions (- +, -, *, / and **) are improved :
                   1841: 'X' 0 + and 0 'X' + return 'X';
                   1842: 'X' 0 - returns 'X';
                   1843: 'X' 1 * and 1 'X' * return 'X';
                   1844: 'X' 0 * and 0 'X' * returns 0; 
                   1845: 'X' 1 / returns 'X';
                   1846: 'X' 1 ** returns 'X';
                   1847: 'NEG(X)' NEG returns 'X';
                   1848: - autoconf/automake scripts are improved: now, the size of the different types
                   1849: found by configure are used in rpltypes.h (rplconfig.h is written by configure);
                   1850: - rdynamic flag is added in src/Makefile.am. This flag is used in the first
                   1851: makefile, but forgotten in the new process;
                   1852: - Flag 31 is tested before saving any arguments in bibliotheques_externes.c;
                   1853: - POS can now be used on lists;
                   1854: - ELSILON is written. This function returns the smallest real e(x) such as
                   1855: e+abs(x) != abs(x).
                   1856: * Mon Feb 11 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4e (RPL/2)
                   1857: - now, INT intrinsic function can be interrupted;
                   1858: - precision of sommation_vecteur_xxx() subroutines is improved;
                   1859: - new vim syntax file written for vim 6.0.
                   1860: * Mon Feb 04 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4d (RPL/2)
                   1861: - explicit error messages are now printed when the RPL/2 is used in
                   1862: interactive mode;
                   1863: - major bug is fixed in OPEN intrinsic: with 'REPLACE' status, file lock was
                   1864: tested after the file is opened, thus, when the file was locked, it was
                   1865: deleted too!;
                   1866: - configure script is improved (and it seems to be good ;-) );
                   1867: - An --disable-experimental flag is added to the configure script. Thus, even
                   1868: if you compile a beta release, you can compile a stable RPL/2;
                   1869: - new syntax and ftplugin written for vim 6.0.
                   1870: * Wed Jan 30 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4c (RPL/2)
                   1871: - configure script is improved.
                   1872: * Sun Jan 27 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4b (RPL/2)
                   1873: - ncurses now replaces termcap;
                   1874: - Côme DESPLATS has written a configure script.
                   1875: * Fri Jan 18 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4a (RPL/2)
                   1876: - KIND is added and returns the type of the numerical argument ;
                   1877: - history file is added.
                   1878: * Tue Jan 15 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre4 (RPL/2)
                   1879: - Stable release. Unformatted files are disabled in this release.
                   1880: * Mon Jan 14 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3h (RPL/2)
                   1881: - SIGTSTP (CTRL+Z) is added. In a script, a SIGTSTP signal signifies
                   1882: that the RPL/2 seqencer must stop and must give a prompt. This
                   1883: signal is an asynchonous "HALT" command;
                   1884: - SIGINT (CTRL+C) variables stack corruption is fixed;
                   1885: - IFERR seems to be fixed (in equation evaluation routine);
                   1886: - Memory leak is fixed (ADR object type);
                   1887: - DATE returns both date and hours;
                   1888: - TIME now returns user and system CPU times;
                   1889: - MEM is added.
                   1890: * Thu Jan 10 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3g (RPL/2)
                   1891: - Makefile is improved to support sparc v7 (sun4c), sparc v8 (sun4m) and
                   1892: sparc v9 (sun4u). Now, RPL/2 can be built on i386 (i486 is known as i386),
                   1893: i586, i686, K6, K7, alpha ev4, alpha ev5, alpha ev56, alpha ev6, sparc v7,
                   1894: sparc v8 and sparc v9. Compilation of RPL/2 on my Sun Sparc 2 (sun4c,
                   1895: CPU 4/75, 64 MB, 40 MHz with FPU) is a very great mission :
                   1896: 
                   1897: Newton:[~/rpl/rpl] > time make install
                   1898: ...
                   1899: real    338m39.623s
                   1900: user    324m32.290s
                   1901: sys     10m47.380s
                   1902: Newton:[~/rpl/rpl] >
                   1903: 
                   1904: I don't know if you will compile this language on old worstations, but
                   1905: it is usable ;-) ;
                   1906: - SYSEVAL is improved. An external program can be called without any shell.
                   1907: Thus, even if the sticky bit is set, RPL/2 can not give a shell root when
                   1908: a SYSEVAL command crashes;
                   1909: - minor bug is fixed in recherche_type() (# xxxxb parsing);
                   1910: - presence of bootstrap entry point is verified before launching the
                   1911: sequencer;
                   1912: - minor bug is fixed in formateur_tex() (underscore in mathematical
                   1913: expression);
                   1914: - Lapack is updated.
                   1915: * Thu Jan 3 2002 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3f (RPL/2)
                   1916: - IFERR is now known in an expression, but not usable.
                   1917: * Mon Dec 31 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3e (RPL/2)
                   1918: - several bugs are fixed.
                   1919: * Mon Dec 17 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3d (RPL/2)
                   1920: - major bugfix in file locking.
                   1921: * Fri Dec 14 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3c (RPL/2)
                   1922: - minor fixes is system() call.
                   1923: * Fri Nov 30 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3b (RPL/2)
                   1924: - automatic limitation of the graphical depth due to a limitation (bug ?)
                   1925: of gnuplot.
                   1926: * Mon Nov 19 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3a (RPL/2)
                   1927: - new file temp management.
                   1928: * Sun Nov 18 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre3 (RPL/2)
                   1929: - memory leak is fixed in STO instruction;
                   1930: - minor bug in file management is fixed;
                   1931: - BACKSPACE is added;
                   1932: - VARS is added;
                   1933: - file locks are improved.
                   1934: * Wed Nov 14 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2l (RPL/2)
                   1935: - major bug is fixed (on sparc architecture) and RPL/2 can now run
                   1936: on sparc stations;
                   1937: - INDEP and DEPND are improved;
                   1938: - AXES is added;
                   1939: - WRITE, APPEND and REWIND are added.
                   1940: * Sun Nov 11 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2k (RPL/2)
                   1941: - write is improved ;
                   1942: - major bug is found and fixed in copie_objet() with struct_fichier;
                   1943: - minor bug is fixed in OPEN function;
                   1944: - minor bug is fixed in analyse_syntaxique() subroutine. All commands
                   1945: are analysed before starting their executions.
                   1946: * Thu Nov 8 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2j (RPL/2)
                   1947: - minor bug is fixed in appel_gnuplot();
                   1948: - RPL/2 can work without LANG variable.
                   1949: * Wed Oct 31 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2i (RPL/2)
                   1950: - WAIT function is improved (removing the polling function);
                   1951: - LAST stack is not active (default) when rpl is called without the option -i.
                   1952: In all other cases, LAST stack is active;
                   1953: - Labels can be added on a gnuplot output (function LABEL);
                   1954: - LCD-> and ->LCD are added.
                   1955: * Sun Oct 21 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2h (RPL/2)
                   1956: - minor bug is fixed in TeX output (pi);
                   1957: - new english manual is added.
                   1958: * Wed Oct 16 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2g (RPL/2)
                   1959: - LOCK, WFLOCK and UNLOCK are added. A file is locked when it is opened;
                   1960: - VERSION function is added. It returns the version number of the interpreter;
                   1961: - minor bug is fixed in evaluation subroutine;
                   1962: - english error messages are been fixed.
                   1963: * Tue Oct 09 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2f (RPL/2)
                   1964: - interrupt subroutine is added;
                   1965: - formatted files support is continued.
                   1966: * Sun Sep 30 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2e (RPL/2)
                   1967: - formateur_fichier.c is added to perform formatted files write.
                   1968: * Thu Sep 27 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2d (RPL/2)
                   1969: - minors bugfixes in FIX format in formateur_reel() subroutine;
                   1970: - new manual page in english;
                   1971: - FORMAT intrinsic is added and can read any format for "formatted" file.
                   1972: * Sun Sep 23 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2c (RPL/2)
                   1973: - OPEN, CLOSE, SYNC, INQUIRE, CREATE and DELETE are tested;
                   1974: - a man page in the first manual section is written.
                   1975: * Thu Sep 20 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2b (RPL/2)
                   1976: - major bugfixes in recherche_type() subroutine: sometimes in interactive mode,
                   1977: this routine was be able to forget the last element of a list, a vector or
                   1978: a matrix.
                   1979: * Mon Sep 17 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2a (RPL/2)
                   1980: - OPEN, CLOSE and DELETE are known by the language but not very usable;
                   1981: - minor bugfixes in evaluation routine.
                   1982: * Sun Sep 16 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre2 (RPL/2)
                   1983: - major bugfixes in evaluation routine.
                   1984: * Sat Sep 15 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1d (RPL/2)
                   1985: - conditional structures can be used in equations.
                   1986: * Fri Sep 14 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1c (RPL/2)
                   1987: - Minor bugfixes in makefile.
                   1988: * Sat Sep  8 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1b (RPL/2)
                   1989: - CONVERT is written;
                   1990: - CYCLE, FOR/NEXT, FOR/STEP, START/NEXT, START/STEP, DO/UNTIL/END and
                   1991: WHILE/REPEAT/END can now be used in an equation;
                   1992: - I fix some troubles with evaluation subroutine;
                   1993: - db3 library is added.
                   1994: * Thu Sep  6 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1a (RPL/2)
                   1995: - add rplconvert and rplunits sources;
                   1996: - add CONVERT definition (but it does not work).
                   1997: * Mon Sep  3 2001 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre1 (RPL/2)
                   1998: - initial public release (GPL).
                   1999: * Thu Apr  2 1998 BERTRAND Joël <rpl2@systella.fr> rpl-4.00pre0 (RPL/2)
1.206     bertrand 2000: - RPL is rewritten from scratch and renamed RPL/2.
1.1       bertrand 2001: #* 1992 BERTRAND Joël rpl-3.02 (RPL-387)
                   2002: #- minor bugfixes.
                   2003: #* 1991 BERTRAND Joël rpl-3.01 (RPL-387)
                   2004: #- arithmetic processor support is added to improve global performances.
                   2005: #* 1991 BERTRAND Joël rpl-3.00 (RPL-386)
                   2006: #- idem... but on an i386DX...
                   2007: #* 1990 BERTRAND Joël rpl-2 (RPL-6809)
                   2008: #- a new release on a more powerfull processor and with new functions and an
                   2009: #built-in editor. It has been written on a SMT-Goupil G3-6809 running
                   2010: #Flex9 (320 KB of RAM and a graphic card used to draw 512*256 graphics in
                   2011: #8 colors)
                   2012: #* 1989 BERTRAND Joël rpl-1 (RPL-6502)
                   2013: #- initial release (only an historic interest) written on an ORIC Atmos 48K.
                   2014: #No graphic was provided.

CVSweb interface <joel.bertrand@systella.fr>