--- rpl/Attic/configure	2011/12/05 19:35:52	1.98
+++ rpl/Attic/configure	2012/03/15 14:10:34	1.108
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for rpl 4.1.5.
+# Generated by GNU Autoconf 2.68 for rpl 4.1.7.
 #
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -557,8 +557,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='rpl'
 PACKAGE_TARNAME='rpl'
-PACKAGE_VERSION='4.1.5'
-PACKAGE_STRING='rpl 4.1.5'
+PACKAGE_VERSION='4.1.7'
+PACKAGE_STRING='rpl 4.1.7'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
 
@@ -604,6 +604,9 @@ ac_subst_vars='am__EXEEXT_FALSE
 am__EXEEXT_TRUE
 LTLIBOBJS
 LIBOBJS
+DEBVIM
+DEBMYSQL
+DEBPQ
 LIBMOTIF
 INCMOTIF
 GIAC
@@ -704,6 +707,7 @@ CXX
 am__fastdepCC_FALSE
 am__fastdepCC_TRUE
 CCDEPMODE
+am__nodep
 AMDEPBACKSLASH
 AMDEP_FALSE
 AMDEP_TRUE
@@ -719,6 +723,8 @@ CFLAGS
 CC
 AM_BACKSLASH
 AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
 am__untar
 am__tar
 AMTAR
@@ -1391,7 +1397,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures rpl 4.1.5 to adapt to many kinds of systems.
+\`configure' configures rpl 4.1.7 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1466,7 +1472,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of rpl 4.1.5:";;
+     short | recursive ) echo "Configuration of rpl 4.1.7:";;
    esac
   cat <<\_ACEOF
 
@@ -1589,7 +1595,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-rpl configure 4.1.5
+rpl configure 4.1.7
 generated by GNU Autoconf 2.68
 
 Copyright (C) 2010 Free Software Foundation, Inc.
@@ -2300,7 +2306,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by rpl $as_me 4.1.5, which was
+It was created by rpl $as_me 4.1.7, which was
 generated by GNU Autoconf 2.68.  Invocation command line was
 
   $ $0 $@
@@ -3214,6 +3220,33 @@ yes) AM_DEFAULT_VERBOSITY=0;;
 no)  AM_DEFAULT_VERBOSITY=1;;
 *)   AM_DEFAULT_VERBOSITY=1;;
 esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
 AM_BACKSLASH='\'
 
 if test "`cd $srcdir && pwd`" != "`pwd`"; then
@@ -3238,7 +3271,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='rpl'
- VERSION='4.1.5'
+ VERSION='4.1.7'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3268,11 +3301,11 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}ma
 
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
 
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
 
 
 
@@ -3288,6 +3321,33 @@ yes) AM_DEFAULT_VERBOSITY=0;;
 no)  AM_DEFAULT_VERBOSITY=1;;
 *)   AM_DEFAULT_VERBOSITY=0;;
 esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
 AM_BACKSLASH='\'
 
 
@@ -3299,11 +3359,11 @@ READLINE=readline-6.2
 UNITS=units-1.88
 GSL=gsl-1.15
 GPP=gpp-3.0
-GNUPLOT=gnuplot-4.4.3
+GNUPLOT=gnuplot-4.6.0
 FILE=file-5.03
 ICONV=libiconv-1.13.1
-SQLITE=sqlite-3.7.9
-OPENSSL=openssl-1.0.0e
+SQLITE=sqlite-3.7.10
+OPENSSL=openssl-1.0.1
 OPENMOTIF=openmotif-2.3.3
 LIBXPM=libXpm-3.5.9
 SIGSEGV=libsigsegv-2.6
@@ -3964,6 +4024,7 @@ fi
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
+  am__nodep='_no'
 fi
  if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=
@@ -3988,6 +4049,7 @@ else
   # instance it was reported that on HP-UX the gcc test will end up
   # making a dummy file named `D' -- because `-MD' means `put the output
   # in D'.
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -4047,7 +4109,7 @@ else
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
       # This compiler won't grok `-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
@@ -4527,6 +4589,7 @@ else
   # instance it was reported that on HP-UX the gcc test will end up
   # making a dummy file named `D' -- because `-MD' means `put the output
   # in D'.
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -4586,7 +4649,7 @@ else
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
       # This compiler won't grok `-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
@@ -6286,8 +6349,10 @@ if test "${enable_vim+set}" = set; then
   enableval=$enable_vim;
 if test "$enableval" = "no"; then
 	VIM_SUPPORT=no
+	DEBVIM=
 else
 	VIM_SUPPORT=yes
+	DEBVIM=", vim"
 fi
 else
   VIM_SUPPORT=guessed
@@ -6354,7 +6419,7 @@ fi
 
 
 if test "$MOTIF_SUPPORT" = "-DMOTIF_SUPPORT"; then
-	libX="$X_LIBS -lXt -lX11"
+	libX="$X_LIBS -lXt -lX11 -lXext"
 	LIBMOTIF="\$(top_builddir)/tools/$OPENMOTIF/lib/Xm/.libs/libXm.a \
 			\$(top_builddir)/tools/$LIBXPM/src/.libs/libXpm.a"
 	INCMOTIF="-I\$(top_srcdir)/tools/$OPENMOTIF/lib \
@@ -6420,6 +6485,12 @@ if test ! -d "$srcdir"/tools/$NCURSES; t
 	gunzip -c "$srcdir"/tools/$NCURSES.tar.gz | \
 			(cd "$srcdir/tools" && tar -xf -)
 	(cd "$srcdir/tools/"$NCURSES && \
+	 		for i in ../$NCURSES*.sh.gz;
+			do TMP=$i; gunzip -c $i > ${TMP%.*};
+			done;
+	 		for i in ../$NCURSES*.sh;
+			do chmod 775 $i && ./$i;
+			done;
 			for i in ../$NCURSES*.patch.gz;
 			do gunzip -c $i | patch -p1;
 			done);
@@ -7140,14 +7211,18 @@ $as_echo "$as_me: WARNING: Cannot find v
 Download at http://www.vim.org/
 " >&2;}
 		VIM_SUPPORT="-UVIM_SUPPORT"
+		DEBVIM=
 	else
 		VIM_SUPPORT="-DVIM_SUPPORT"
+		DEBVIM=", vim"
 	fi
 else
 	if test "$VIM_SUPPORT" = no; then
 		VIM_SUPPORT="-UVIM_SUPPORT"
+		DEBVIM=
 	else
 		VIM_SUPPORT="-DVIM_SUPPORT"
+		DEBVIM=", vim"
 	fi
 fi
 
@@ -7645,6 +7720,7 @@ fi
 if test "$MYSQL_SUPPORT" = "-DMYSQL_SUPPORT"; then
 	MYSQL_LIB=no
 
+
 	if test $MYSQL_LIB = no; then
 		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libmysql libraries in $libMySQLlib" >&5
 $as_echo_n "checking for libmysql libraries in $libMySQLlib... " >&6; }
@@ -7688,9 +7764,13 @@ rm -f core conftest.err conftest.$ac_obj
 	fi
 fi
 
+DEBMYSQL=
+
 if test "$MYSQL_SUPPORT" != "-DMYSQL_SUPPORT"; then
 	libMySQLinc=
 	libMySQLlib=
+else
+	DEBMYSQL=", libmysqlclient18"
 fi
 
 
@@ -8030,9 +8110,13 @@ rm -f core conftest.err conftest.$ac_obj
 	fi
 fi
 
+DEBPQ=
+
 if test "$POSTGRESQL_SUPPORT" != "-DPOSTGRESQL_SUPPORT"; then
 	libPgSQLinc=
 	libPgSQLlib=
+else
+	DEBPQ=", libpq5"
 fi
 
 
@@ -9670,6 +9754,10 @@ esac
 
 
 
+
+
+
+
 if test $RECURSIVE = yes; then
 	subdirs="$subdirs tools/$NCURSES"
 
@@ -10290,7 +10378,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by rpl $as_me 4.1.5, which was
+This file was extended by rpl $as_me 4.1.7, which was
 generated by GNU Autoconf 2.68.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -10356,7 +10444,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-rpl config.status 4.1.5
+rpl config.status 4.1.7
 configured by $0, generated by GNU Autoconf 2.68,
   with options \\"\$ac_cs_config\\"